Silicon has been considered as a promising anode material due to its high theoretical capacity (3579 mAh g−1), however, it suffers from capacity degradation owing to the series of multiscale fractures in the electrode caused by the volume variation (≈300%) during phase transitions. The molecular/structural design of polymeric binders has been pivotal in overcoming the challenges to improve the integrity of Si anode via strong interactions between active materials and binders. In this respect, the covalently crosslinked polyacrylamide (PAM) network, which effectively maintains its mechanical strength and shape, is introduced as a novel binder system for Si active materials. Unlike the thermal crosslinking, the abundant polar‐functional groups, related to the strong interactions between Si and polymer, are not sacrificed in their network by virtue of the in situ polymerization. Through the PAM gel, the Si‐based electrode exhibits a superior capacity of ≈1526 mAh g−1 at an optimized crosslinker concentration after 500 cycles. In addition, the effect of the chemical/mechanical properties of PAM gel on the electrochemical properties of Si is adequately elucidated. The results will provide meaningful insight regarding the design of novel binders, especially in the application of the covalently crosslinked structure to Si‐based electrodes.
High-mobility inorganic CuCrO2 nanoparticles are co-utilized with conventional poly(bis(4-phenyl)(2,5,6-trimethylphenyl)amine) (PTAA) as a hole transport layer (HTL) for perovskite solar cells to improve device performance and long-term stability. Even though CuCrO2 nanoparticles can be readily synthesized by hydrothermal reaction, it is difficult to form a uniform HTL with CuCrO2 alone due to the severe agglomeration of nanoparticles. Herein, both CuCrO2 nanoparticles and PTAA are sequentially deposited on perovskite by a simple spin-coating process, forming uniform HTL with excellent coverage. Due to the presence of high-mobility CuCrO2 nanoparticles, CuCrO2/PTAA HTL demonstrates better carrier extraction and transport. A reduction in trap density is also observed by trap-filled limited voltages and capacitance analyses. Incorporation of stable CuCrO2 also contributes to the improved device stability under heat and light. Encapsulated perovskite solar cells with CuCrO2/PTAA HTL retain their efficiency over 90% after ~900-h storage in 85 °C/85% relative humidity and under continuous 1-sun illumination at maximum-power point.