At the research level, novel active materials for batteries are synthesised on a small scale, fabricated into electrodes and electrochemically characterised using each group's established process due to the lack of standards. Recently, eminent researchers have criticised the implementation of e. g. low active material contents/electrode loadings, the use of research‐type battery cell constructions, or the lack of statistically relevant data, resulting in overstated data and thus giving misleading predictions of the key performance indicators of new battery technologies. Here, we report on the establishment of a reference system for the development of sodium‐ion batteries. Electrodes are fabricated under relevant conditions using 9.5 mg/cm 2 self‐synthesised Na 3 V 2 (PO 4 ) 3 /C cathode active material and 3.6 mg/cm 2 commercially available hard carbon anode active material. It is found that different types of battery cells are more or less suitable for half‐ and/or full‐cell testing, resulting in ir/reproducible or underestimated active material capacities. Furthermore, the influence of electrode overhang, which is relevant for upscaling, is evaluated. The demonstrator cell (TRL 4–5) has been further characterised providing measured data on the power/energy density and thermal behaviour during rate testing up to 15 C and projections are made for its practical limits.
Sodium manganese hexacyanoferrate Na2Mn[Fe(CN)6] (NaMnHCF) is a promising cathode material for sodium‐ion batteries, owing to its voltage profile similar to that of lithium iron phosphate (LFP) and its use of abundant, inexpensive resources. This study presents full cell cycling data for NaMnHCF against hard carbon (HC) anodes with various common carbonate‐based electrolytes across different voltage windows. Post‐mortem analyses indicate that, in addition to NaMnHCF degradation, Na+‐ion inventory loss significantly contributes to capacity decline during cycling. Surprisingly, an ICP‐OES analysis of the post‐mortem anodes show that the correct electrolyte choice can entirely prevent the commonly cited manganese dissolution of NaMnHCF during cycling. This work also highlights methods for characterizing and processing NaMnHCF and the broader Prussian White family of materials, helping to introduce these materials to a wider audience. Finally, a comparison between NaMnHCF/HC and LFP/graphite is provided, examining both cost and electrochemical performance.
1 February 2025 in Journal of the Electrochemical Society
The recycling of LiNi0.6Mn0.2Co0.2O2 cathode active material (CAM) from Li-ion batteries cannot avoid the presence of impurities in the recycled Ni-, Co-, or Mn sulfates. The precise understanding of the impurities influence on the resynthesis is of uttermost importance. To tackle this goal, this study simulated the resynthesis process by adding on purpose and separately Al-, Fe-, and Li-sulfate in the regular CAM synthesis. Their effects on the morphology, elemental composition, crystal structure, and electrochemical performances of Ni0.6Mn0.2Co0.2Mx(OH)2 and LiNi0.6Mn0.2Co0.2MxO2 were systematically investigated for x = 0.0005, 0.005, and 0.05. The in-house reference material synthesized via a coprecipitation reaction allowed to produce a well-characterized basis. Above xAl = 0.0005, the hydroxide secondary particles lost their spherical form and above xFe = 0.005, the crystal structure was affected. Both effects led to cell capacity decay, contrary to the discrete influence of Li. The absence of any positive effects reported by similar studies, the complexity of the various influences of these foreign ions and the limitations of the coin cells tests were pointed out. These results are a solid groundwork for future academic and industrial studies in the field of circular economy, by determining a tolerance threshold for each impurity.
A stochastic 3D modeling approach for the nanoporous binder-conductive additive phase in hierarchically structured cathodes of lithium-ion batteries is presented. The binder-conductive additive phase of these electrodes consists of carbon black, polyvinylidene difluoride binder and graphite particles. For its stochastic 3D modeling, a three-step procedure based on methods from stochastic geometry is used. First, the graphite particles are described by a Boolean model with ellipsoidal grains. Second, the mixture of carbon black and binder is modeled by an excursion set of a Gaussian random field in the complement of the graphite particles. Third, large pore regions within the mixture of carbon black and binder are described by a Boolean model with spherical grains. The model parameters are calibrated to 3D image data of cathodes in lithium-ion batteries acquired by focused ion beam scanning electron microscopy. Subsequently, model validation is performed by comparing model realizations with measured image data in terms of various morphological descriptors that are not used for model fitting. Finally, we use the stochastic 3D model for predictive simulations, where we generate virtual, yet realistic, image data of nanoporous binder-conductive additives with varying amounts of graphite particles. Based on these virtual nanostructures, we can investigate structure-property relationships. In particular, we quantitatively study the influence of graphite particles on effective transport properties in the nanoporous binder-conductive additive phase, which have a crucial impact on electrochemical processes in the cathode and thus on the performance of battery cells.
Potassium vanadium phosphate K 3 V 2 (PO 4 ) 3 (KVP) is a promising polyanionic cathodic material for potassium‐ion batteries. As many other polyanionic materials KVP suffers from low electronic conductivity and shows just limited electrochemical performance. To overcome this limitation and improve the electrochemical performance, an easily scalable spray‐drying process is developed to create hierarchically structured KVP/C composites. The spray‐drying process leads to spherical and open porous granules of KVP particles wrapped in a carbon matrix, formed by the decomposition of sucrose and β ‐lactose. The influence of different carbon sources (sucrose and β ‐lactose) onto the granules’ microstructure is systematically studied and correlated it with the electrochemical performance of the KVP/C. The best‐performing composition is employed to study different electrolyte additives with the aim to improve the electrolyte stability at high potentials in potassium half‐cells.