22 December 2023 in Mechanics and Advanced Technologies
The types of injuries and types of striking elements were analyzed, the conditions of patients requiring urgent surgical intervention were assessed. The possibilities of existing means of diagnosing fragments in the patient's body were analyzed, and it was concluded that for non-X-ray contrast fragments, the proposed method of mechanical contact with a special flexible and elastic probe is appropriate and effective.A special tool for examining wound canals has been developed, consisting of a flexible probe for individual use and a handle-holder with a microphone capsule, the membrane of which is directly connected to the probe and reacts to mechanical contact with an obstacle, and the capsule itself is directly connected to the oscilloscope through a signal amplifier . which has spectral signal processing circuits.The problem of the interaction of the elastic contact of a non-rigid element with a fragment located in a viscous medium is set, provided that the properties of the medium are not constant. Typical solutions of this problem for various types of fragments and parameters of the contacting element itself are presented. A picture of the noise emission accompanying the contact is shown.The functional dependence of noise emission parameters on the shape and type of the foreign object in the wound canal was revealed. The expediency of using the frequency-amplitude characteristic of noise radiation as a controlled parameter has been proven. A conclusion was made about the functional conditioning of the width of the signal spectrum and basic frequencies at the time of mechanical contact with a foreign object in the wound, depending on its shape and type; it was established that the use of an oscilloscope with a spectral analysis channel allows for the fairly accurate identification of a non-radiocontrast foreign object in a wound.
3 February 2026 in Mechanics and Advanced Technologies
Improving the safety of humanitarian demining during ground-based re-inspection of areas potentially contaminated with mines and explosive ammunition remains a critical challenge, particularly when mobile ground robotic systems are employed. Reliable detection and identification of such hazardous objects–often concealed, camouflaged, or occluded by foreign materials–require the integration of additional sensing methods with complementary or hybrid scanning techniques. However, this integration results in a substantial increase in data volume, necessitating the use of advanced processing approaches based on artificial intelligence. This paper proposes a technology for the detection and recognition of hazardous objects, including mines and explosive ammunition, based on combined terrain scanning with additional mathematical framework support with implementation of artificial intelligence methods. The proposed technology incorporates specialized algorithmic and hardware components and relies on the analysis of data acquired from unmanned aerial vehicle (UAV) surveys. It further involves ground-based re-inspection and comprehensive hazard assessment of previously identified areas of interest containing suspected objects. Mobile ground robotic systems are employed to perform multi-modal terrain scanning, followed by the construction of an aggregated data matrix, its subsequent analysis, and an integral evaluation using hyperspectral data processing techniques based on two-dimensional Fourier series. To identify hazardous objects with regular geometric shapes, dedicated artificial neural networks are utilized. The results of physical terrain scanning are represented within the framework of fuzzy set theory. As an illustrative example, an algorithm describing the application of an Elman neural network for the identification of circular-shaped hazardous objects is presented.