26 February 2024 in IEEE Transactions on Energy Conversion
An implicit generalized predictive self-correction controller (IGPC) is proposed in this paper to suppress the force ripple of switched reluctance linear motors (SRLMs). Due to its good robustness and rolling optimization features, the dynamic matrix controller (DMC), a kind of multi-step model predictive controller, is considered an effective method to suppress the force ripple of SRLMs. However, because DMC uses a fixed predictive model, it has high requirements for the accuracy of the predictive model, and the non-linear SRLMs make it difficult to adapt to different loads. To ease this problem, the IGPC proposed in this paper adopts a more flexible predictive model and improves the generalized predictive controller (GPC) to avoid solving the Diophantine equation online, which can adapt to different loads and reduce the system's burden. Besides, the proposed IGPC reduces the computational burden during matrix operations compared to DMC. In the simulation and experimental test based on a 100W 6/4 double-sided SRLM (DSRLM), the proposed IGPC is compared with DMC, and the force distribution function (FDF) adopts the current hysteresis, the results show that the proposed IGPC a better force ripple suppressing performance and has better load capacity compared with DMC.
14 August 2025 in IEEE Transactions on Power Electronics
This article proposes a wireless power transfer system based on hybrid self-switching of coupled inductor that not only realizes constant current (CC)/constant voltage (CV) output but also effectively copes with a variety of abnormal working conditions in the charging process by switching on the secondary side. First, the LCC-LCC/S self-switching composite topology is presented, and the CC/CV switching is achieved by utilizing a coupled inductor with a center tap based on the LCC compensation topology. The working principle of the CC/CV topology and the parameter calculation flow are analyzed in detail. Subsequently, the impedance, output characteristics, and switching characteristics of the CC/CV topology are simulated and analyzed. In addition, the topology’s stability under abnormal working conditions, such as the missing adjacency, load short-circuit, and load open-circuit, is analyzed. Finally, an experimental platform is constructed with the objective of verifying the feasibility and effectiveness of the proposed scheme. The experimental results demonstrate that the proposed charging system exhibits excellent CC and CV output characteristics without the need for additional inductor capacitance. The proposed system has a maximum output efficiency of 89.6%, a maximum current of 5.3 A, and a maximum voltage of 23 V, which fully meets the requirements of CC and CV wireless charging.
25 December 2024 in IEEE Transactions on Transportation Electrification
Conventional wireless power transmission systems are only capable of handling a single load, which presents a challenge in meeting the operational requirements of both the switched reluctance motor (SRM) and the battery. In addition, the winding demagnetization current of traditional power converters decreases slowly, which reduces the efficiency and output capacity of the motor. To address these issues, this article proposes a wireless SRM drive and energy recovery system based on an individual demagnetization circuit. The proposed wireless system employs an LCC-S compensation network to drive the motor load and maintain a constant voltage (CV) gain throughout the forward power transfer process. In addition, a hybrid LCC–LCC/S self-switching compensation network is utilized to achieve constant-current (CC)/CV charging. During a reverse power transfer, the LCC–LCC compensation network is employed for energy recovery, thereby establishing an energy interconnection between the motor and the grid. The findings indicate that the efficiency of the motor power converter based on an individual demagnetization circuit is 10%–20% superior to that of the conventional power converter. The system is capable of maintaining CC and CV characteristics under battery load conditions, thereby ensuring safe and stable battery charging. Furthermore, no additional components are required for this functionality. The peak efficiency of the system is 87%. Under motor load conditions, the system maintains CV characteristics, allowing the motor to operate stably. These results demonstrate that the system has notable improvements in energy efficiency and reliability, particularly in the areas of bidirectional energy transmission and safe battery charging.
12 September 2025 in IEEE Transactions on Transportation Electrification
This article proposes a method to suppress electromagnetic force ripple in switched reluctance linear motors (SRLMs). While the force distribution function (FDF) method is effective, conventional approaches employing fixed functions limit adaptability to varying conditions, and existing adaptive algorithms often exhibit suboptimal online adjustment. To overcome these limitations, this study introduces an adaptive reference trajectory that dynamically adjusts based on mover speed and load. In addition, turn-on/off positions are adaptively modified according to a commutation point selected by the force-per-ampere rate; the selection of the commutation point reduces the current root-mean-square (RMS) and significantly enhances the tracking performance of the system. By transforming the Sigmoid function, the reference trajectory is defined by only two parameters, enabling easy online integration of the adaptive function. Furthermore, a multistep continuous control set model predictive controller (CCS-MPC) with self-correction is adopted as the current controller to improve tracking performance. Simulation and experimental results demonstrate superior regulation performance compared to genetic algorithm (GA) iterative methods and the conventional FDF approach. Compared with the GA algorithm, this method reduces the electromagnetic force ripple by an average of 11.3% and the average current RMS by 2.7%.
21 April 2025 in IEEE Transactions on Plasma Science
This article proposes an air-cored three-phase tubular permanent magnet linear generator (3P-TPMLG) with a novel free-piston Stirling engines (FPSEs) structure. First, the concrete construction and initial dimensions of the 3P-TPMLG are given through design principles and experience. Second, the mover’s basic working principle and operational process are discussed using relevant equations and the isolines distribution of magnetic vector potential at several typical mover positions. Third, the 2-D and 3-D machine models established by finite element analysis (FEA) software FLUX and electromagnetic field analysis are presented. Furthermore, two pivotal parameters are optimized to improve operating conditions and output performance of 3P-TPMLG. Finally, the output parameters of 3P-TPMLG are solved separately by FLUX under the constant and sinusoidal velocities. Following finite element dynamic simulation verification, 3P-TPMLG has good power output at both unchanged and sinusoidal velocities. Meanwhile, when the reciprocating frequency is 80 Hz, and the proportion of permanent magnet (PM) length in half pole pitch is 7/10, the comprehensive evaluation of the generator is optimal. The novel structural 3P-TPMLG for FPSEs can realize symmetrical three-phase power generation when the mover reciprocates linear motion at a sinusoidal velocity. Besides, the comparisons prove that the 3P-TPMLG has the advantages of high efficiency, high power generation density, and low construction price.
30 July 2025 in IEEE Transactions on Plasma Science
POPopov Stanislav Olegovich
Popov Stanislav Olegovich
BABodrenkov Evgenii Alexandrovich
Bodrenkov Evgenii Alexandrovich
+1
This article presents a novel tubular double-sided switched reluctance linear motor (TDSRLM), and its magnetic characteristic is modeled. This article compares two modeling methods: magnetic equivalent circuit (MEC) and radial basis function (RBF) neural network. A 3-D finite element model (FEM) of TDSRLM is established to evaluate the accuracy of the model. The calculation results show that the MEC method can achieve relatively high accuracy when the motor is unsaturated. When the electromagnetic characteristic is nonlinear, the accuracy of MEC reduces significantly. The RBF neural network performs accurately when the motor is operated in nonlinear conditions.