FeCuNbSiB thin films deposited on different substrates (glass, CuBe and Havar) by radio frequency magnetron sputtering (rf power of 60 W) from ribbons with the nominal composition Fe73.5Cu1Nb3Si15.5B7 have been investigated. Structural, magnetic and magnetoelastic behaviour for samples in as-deposited state and thermal treated at temperatures between 200 °C and 530 °C have been analyzed. In the as-deposited state the samples are amorphous. The magnetic behaviour depends on the nature of substrate, the lowest values for the coercive magnetic field being obtained in the case of films deposited on glass substrate. The structural and magnetic behaviour (surface and bulk magnetic hysteresis loops) show that after the heat treatment performed at about 500 °C, the nanocrystalline state was achieved.
This study explores the potential of using nanocomposite powders consisting of NiFe2O4 and Pb(Zr0.47Ti0.53)O3 in varying concentrations (30 %, 40 %, 50 %, and 70 wt.%) to remove pollutants from water-based solutions. XRD, FTIR , and XPS analyses showed the successful synthesis of the pure ferrite phase directly on the ferroelectric templates. The presence of all elements specific to parents NF and PZT can be observed by XPS and EDS analyses. The AFM and PFM observations suggest that the addition of NF can locally enhance and possibly improve the piezoelectric properties. The degradation efficiency was tested under different conditions (mechanical stirring, ultrasonic vibration, and UV irradiation). The results showed that the nanocomposites exhibited high efficiency in the degradation of the reactive yellow 84 dye and Bisphenol A , with an optimum composition of x = 40 % NiFe2O4 addition, in line with PL tests. Also, no leached Pb ions could be detected in the solution. Furthermore, a simple rotational stirring method was found to be a fast and effective way to degrade the micropollutants.
Carbamazepine (CBZ) is a persistent emerging pollutant that presents a major risk to aquatic ecosystems and public safety. In this work TiO 2 APTES-functionalized spiropyran-based nanoparticles as an efficient catalyst for the removal of CBZ from water were designed. Detailed structural, morphological, optical, chemical and surface area investigations demonstrate the successful functionalization of the material. The highest photocatalytic activity was achieved at an optimal catalyst loading of 0.75 g/L under simulated solar light, following a pseudo-first-order kinetic model with a rate constant of 0.0313 min⁻ 1 (R 2 = 0.999). Radical scavenging tests demonstrate that HO⋅, O 2 ⋅⁻ radicals and h + have a major contribution to the CBZ degradation mechanism. Overall, based on the results, the catalyst containing the organic photosensitizer appears to be a feasible and promising material for the efficient removal of persistent pollutants in water.