Getting the most out of muscles: Materials that convert electrical, chemical, or thermal energy into a shape change can be used to form artificial muscles. Such materials include bimetallic strips or host-guest materials or coiled fibers or yarns (see the Perspective by Tawfick and Tang). Kanik et al. developed a polymer bimorph structure from an elastomer and a semicrystalline polymer where the difference in thermal expansion enabled thermally actuated artificial muscles. Iterative cold stretching of clad fibers could be used to tailor the dimensions and mechanical response, making it simple to produce hundreds of meters of coiled fibers. Mu et al. describe carbon nanotube yarns in which the volume-changing material is placed as a sheath outside the twisted or coiled fiber. This configuration can double the work capacity of tensile muscles. Yuan et al. produced polymer fiber torsional actuators with the ability to store energy that could be recovered on heating. Twisting mechanical deformation was applied to the fibers above the glass transition temperature and then stored via rapid quenching. Science , this issue p. 145 , p. 150 , p. 155 ; see also p. 125
Correction for ‘Fabrication of a graphene coated nonwoven textile for industrial applications’ by Dharshika Kongahge et al., RSC Adv., 2016, 6, 73203–73209.
Over the past twenty years continuous flow‐ventricular assist devices (VADs) have quantitatively become the main instrument for the treatment of end‐stage heart failure. However, due to the need for anticoagulation and lack of pulsatility their greatest challenges remain infections, bleedings and thromboembolic events. In article number 2000894, Javad Foroughi and co‐workers present an alternative that eliminates the need for anticoagulation and offers a physiologic pulsatile flow where the heart merely acts as a reservoir for blood that is propelled by an electrically contractile artificial muscle wrapped around the heart (WRAP‐VAD).