9 April 2013 in IEEE Transactions on Microwave Theory and Techniques
A first fully integrated 5.2-GHz CMOS-based RF power harvester with an on-chip antenna is presented in this paper. The design is optimized for sensors implanted inside the eye to wirelessly monitor the intraocular pressure of glaucoma patients. It includes a five-stage RF rectifier with an on-chip antenna, a dc voltage limiter, two voltage sensors, a low dropout voltage regulator, and MOSCAP based on-chip storage. The chip has been designed and fabricated in a standard 0.18-$\mu$ m CMOS technology. To emulate the eye environment in measurements, a custom test setup is developed that comprises Plexiglass cavities filled with saline solution. Measurements in this setup show that the proposed chip can be charged to 1 V wirelessly from a 5-W transmitter 3 cm away from the harvester chip. The energy that is stored on the 5-nF on-chip MOSCAP when charged to 1 V is 2.5 nJ, which is sufficient to drive an arbitrary 100-$\mu$ W load for 9 $\ \mu$s at regulated 0.8 V. Simulated efficiency of the rectifier is 42% at ${-}$7 dBm of input power.
21 January 2013 in IEEE Transactions on Antennas and Propagation
A new movable plate concept is presented in this paper to realize mm-wave vertical on-chip antennas through MEMS based post-processing steps in a CMOS compatible process. By virtue of its vertical position, the antenna is isolated from the lossy Si substrate and hence performs with a better efficiency as compared to the horizontal position. In addition, the movable plate concept enables polarization diversity by providing both horizontal and vertical polarizations on the same chip. Through a first iteration fractal bowtie antenna design, dual band (60 and 77 GHz) operation is demonstrated in both horizontal and vertical positions without any change in dimensions or use of switches for two different mediums (Si and air). To support the movable plate concept, the transmission line and antenna are designed on a flexible polyamide, where the former has been optimized to operate in the bent position. The design is highly suitable for compact, low cost and efficient SoC solutions.
1 January 2012 in IEEE Antennas and Wireless Propagation Letters
For the first time, separate transmit and receive on-chip antennas have been designed in an eye environment for implantable intraocular pressure monitoring application. The miniaturized antennas fit on a 1.4-mm 3 CMOS (0.18 μm) chip with the rest of the circuitry. A 5.2-GHz novel inductive-fed and loaded receive monopole antenna is used for wirelessly powering the chip and is conjugately matched to the rectifier in the energy-harvesting and storage unit. The 2.4-GHz transmit antenna is an octagonal loop that also acts as the inductor of the voltage control oscillator resonant tank. To emulate the eye environment in measurements, a custom test setup is developed that comprises Plexiglass cavities filled with saline solution. A transition, employing a balun, is also designed, which transforms the differential impedance of on-chip antennas immersed in saline solution to a 50-Ω single-ended microstrip line. The antennas on a lossy Si substrate and eye environment provide sufficient gain to establish wireless communication with an external reader placed a few centimeters away from the eye.
3 November 2017 in IEEE Transactions on Antennas and Propagation
The development of millimeter-wave (mmW) technologies comes with concerns related to the user exposure. A detailed numerical dosimetry study is performed for a terminal with a 60 GHz antenna module for several representative human body exposure scenarios within 5G small cells. First, numerical considerations are made regarding the user terminal and human body modeling. Then, the user exposure levels in the near field are analyzed for phone call and browsing scenarios. Results show that power absorption is locally distributed on the ear helix and fingertips. Moreover, we demonstrate that the presence of a hand in the phone call scenario increases absorption in the head. The impact of the human body on the antenna performance is also analyzed.
18 December 2020 in IEEE Transactions on Antennas and Propagation
CBCybelle Belem-Goncalves
+1
substrate-integrated discrete-lens antenna manufactured in standard printed-circuit-board (PCB) techno-logy is demonstrated in H-band (225–325 GHz). The arrays composed of phase-shifting unit-cells and a waveguide-fed planar focal source are designed on a single PCB stack with five metal layers and multiple low-loss dielectric substrates in a monolithic module of 20×20×4.52 mm3. The linearly-polarized unit-cells are based on arc-shaped resonators placed between two perpendicular polarizing grids. They achieve eight transmission phase states with less than 1 dB average insertion loss and 27% 1-dB bandwidth. Two antenna prototypes with radiating apertures of 6.6×6.6 mm2 and 10.56×10.56 mm2 are designed, fabricated and measured. They demonstrate linearly-polarized pencil-beam radiation patterns with low side-lobes, low cross-polarization, an experi-mental gain of 20.6/23.1 dBi at 327/332 GHz and 3-dB gain bandwidth of 26.3/17.2%. The impact of manufacturing tolerances is detailed both at unit-cell level and antenna level.