Antiferroelectrics have been recently sparking interest due to their potential use in energy storage and electrocaloric cooling. Their main distinctive feature is antiferroelectric switching, i.e., the possibility to induce a phase transition to a polar phase by an electric field. Here, we investigate the switching behavior of the model antiferroelectric perovskite PbZrO3 using thin films processed by chemical solution deposition in different geometries and orientations. Both out-of-plane and in-plane switching configurations are investigated. The critical field is observed to be highly dependent on the direction of the electric field with respect to the film texture. We show that this behavior is qualitatively consistent with a phase transition to a rhombohedral polar phase. We finally estimate the importance of crystallite orientation and film texturation in the variations observed in the literature.
In this work, we demonstrate an approach for improving ferroelectric properties of La:HfO2 thin films by shifting the grain growth regime toward heterogeneous nucleation. A dilute 0.083 M instead of a 0.25 M solution together with an annealing step after every spin-coating cycle film gives rise to a significant improvement of ferroelectric properties. While a remanent polarization of 7 μC/cm2 was found for randomly oriented conventional films, the value of 15 μC/cm2 for the dilute solution is a result of a mixed 111 and 002 preferential orientation. A more than 50% improved breakdown voltage stems from a global density improvement from 8.0 to 8.4 g/cm3 as obtained from x-ray reflectivity (XRR). We also find superstructure peaks in XRR hinting on periodic alternations of the local density throughout the film thickness. Scanning transmission electron microscopy and secondary ion mass spectrometry confirm this periodicity. The sensitivity of XRR for this periodicity was leveraged to gain further insights in the origin of this superstructure with additional experiments. We conclude that both orientation and the superstructure are caused by a “layered structure” according to Schuler's microstructural zone model. However, our data also provide evidence for parallel chemical effects of cap formation in each stacked sub-layer. While this work shows a significant enhancement of ferroelectric properties, it also provides insights into further optimization potential of solution deposition of HfO2/ZrO2 thin films. Our XRR-based approach supplemented with suitable additional analysis can be of great value for the optimization of other solution-derived thin films beyond the material class studied here.
Chemical Solution Deposition enables low‐cost fabrication of ferroelectric HfO2 films suitable for piezoelectric applications. Control of processing parameters is of utmost importance to obtain high‐quality functional films. However, the impact of the annealing atmosphere on ferroelectric properties of solution‐processed HfO2 films is not clear. In this work, the influence of annealing atmosphere and growth methods on orientation, density and electrical properties of La:HfO2 films is studied. The 45 nm‐thick films are grown by two routes, conventional (crystallization of the final 45 nm‐thick film) and layer‐by‐layer (intermediate crystallizations of 5 nm‐thick films). Annealing is performed in N2:O2 and Ar atmosphere. Films grown by layer‐by‐layer method in an oxygen‐rich atmosphere tend to have higher density (87% of theoretical density) and remanent polarization (15 µC cm–2) than the conventional films (density and remanent polarization of 80% and 7.5 µC cm‐2). Secondary ion mass spectrometry reveals higher amounts of carbon presence in the conventional films annealed in Ar. For layer‐by‐layer films, the ability to control the preferential out‐of‐plane orientation from (111) to (002) simply by changing the annealing atmosphere, is demonstrated. The results can guide the path toward high‐quality thicker films for piezoelectric applications.
Currently, Sb$_2$Se$_3$ thin films receive considerable research interest as a solar cell absorber material. When completed into a device stack, the major bottleneck for further device improvement is the open circuit voltage, which is the focus of the work presented here. Polycrystalline thin film Sb$_2$Se$_3$ absorbers and solar cells are prepared in substrate configuration and the dominant recombination path is studied using photoluminescence spectroscopy and temperature dependent current-voltage characteristics. It is found that a post-deposition annealing after the CdS buffer layer deposition can effectively remove interface recombination since the activation energy of the dominant recombination path becomes equal to the bandgap of the Sb$_2$Se$_3$ absorber. The increased activation energy is accompanied by an increased photoluminescence yield, i.e. reduced non-radiative recombination. Finished Sb$_2$Se$_3$ solar cell devices reach open circuit voltages as high as 485 mV. Contrarily, the short-circuit current density of these devices is limiting the efficiency after the post-deposition annealing. It is shown that atomic layer deposited intermediate buffer layers such as TiO$_2$ or Sb$_2$Se$_3$ can pave the way for overcoming this limitation.