1 October 2018 in IEEE Transactions on Microwave Theory and Techniques
This paper presents an estimation/adaptation method based on the adaptive principal component analysis (APCA) technique to guarantee the identification of the minimum necessary parameters of a digital predistorter. The proposed estimation/adaptation technique is suitable for online field-programmable gate array or system on chip implementation. By exploiting the orthogonality of the resulting transformed matrix obtained with the APCA technique, it is possible to reduce the number of coefficients to be estimated which, at the same time, has a beneficial regularization effect by preventing ill-conditioning or overfitting problems. Therefore, this identification/adaptation method enhances the robustness of the parameter estimation and simplifies the adaptation by reducing the number of estimated coefficients. Due to the orthogonality of the new basis, these parameters can be estimated independently, thus allowing for scalability. Experimental results will show that it is possible to determine the minimum number of parameters to be estimated in order to meet the targeted linearity levels while ensuring a robust well-conditioned identification. Moreover, the results will show how thanks to the orthogonality property of the new basis functions, the coefficients of the digital predistorter can be estimated independently. This allows to tradeoff the digital predistorter adaptation time versus performance and hardware complexity.
3 August 2018 in IEEE Transactions on Microwave Theory and Techniques
This paper presents a technique to estimate the coefficients of a multiple-look-up table (LUT) digital predistortion (DPD) architecture based on the partial least-squares (PLS) regression method. The proposed 3-D distributed memory LUT architecture is suitable for efficient FPGA implementation and compensates for the distortion arising in concurrent dual-band envelope tracking power amplifiers. On the one hand, a new variant of the orthogonal matching pursuit algorithm is proposed to properly select only the best LUTs of the DPD function in the forward path, and thus reduce the number of required coefficients. On the other hand, the PLS regression method is proposed to address both the regularization problem of the coefficient estimation and, at the same time, reducing the number of coefficients to be estimated in the DPD feedback identification path. Moreover, by exploiting the orthogonality of the PLS transformed matrix, the computational complexity of the parameters' identification can be significantly simplified. Experimental results will prove how it is possible to reduce the DPD complexity (i.e., the number of coefficients) in both the forward and feedback paths while meeting the targeted linearity levels.
3 July 2019 in IEEE Transactions on Microwave Theory and Techniques
This paper presents a new technique that dynamically estimates and updates the coefficients of a digital predistorter (DPD) for power amplifier (PA) linearization. The proposed technique is dynamic in the sense of estimating, at every iteration of the coefficient's update, only the minimum necessary parameters according to a criterion based on the residual estimation error. At the first step, the original basis functions defining the DPD in the forward path are orthonormalized for DPD adaptation in the feedback path by means of a precalculated principal component analysis (PCA) transformation. The robustness and reliability of the precalculated PCA transformation (i.e., PCA transformation matrix obtained off line and only once) is tested and verified. Then, at the second step, a properly modified partial least squares (PLS) method, named dynamic partial least squares (DPLS), is applied to obtain the minimum and most relevant transformed components required for updating the coefficients of the DPD linearizer. The combination of the PCA transformation with the DPLS extraction of components is equivalent to a canonical correlation analysis (CCA) updating solution, which is optimum in the sense of generating components with maximum correlation (instead of maximum covariance as in the case of the DPLS extraction alone). The proposed dynamic extraction technique is evaluated and compared in terms of computational cost and performance with the commonly used QR decomposition approach for solving the least squares (LS) problem. Experimental results show that the proposed method (i.e., combining PCA with DPLS) drastically reduces the amount of DPD coefficients to be estimated while maintaining the same linearization performance.