We report on the development of high performance triple and quadruple junction solar cells made of amorphous (a-Si:H) and microcrystalline silicon (μc-Si:H) for the application as photocathodes in integrated photovoltaic–electrosynthetic devices for solar water splitting. We show that the electronic properties of the individual sub cells can be adjusted such that the photovoltages of multijunction devices cover a wide range of photovoltages from 2.0 V up to 2.8 V with photovoltaic efficiencies of 13.6% for triple and 13.2% for quadruple cells. The ability to provide self-contained solar water splitting is demonstrated in a PV-biased electrosynthetic (PV-EC) cell. With the developed triple junction photocathode in the a-Si:H/a-Si:H/μc-Si:H configuration we achieved an operation photocurrent density of 7.7 mA cm−2 at 0 V applied bias using a Ag/Pt layer stack as photocathode/electrolyte contact and ruthenium oxide as counter electrode. Assuming a faradaic efficiency of 100%, this corresponds to a solar-to-hydrogen efficiency of 9.5%. The quadruple junction device provides enough excess voltage to substitute precious metal catalyst, such as Pt by more earth-abundant materials, such as Ni without impairing the solar-to-hydrogen efficiency.
6 September 2017 in Energy & Environmental Science
Bias-free syngas production from solar CO 2 conversion employing a Cu foam cathode coated with Zn nanoflakes as catalyst and integrated in a scalable solar flow-cell reactor.
Photoelectrochemical water splitting promises both sustainable energy generation and energy storage in the form of hydrogen. However, the realization of this vision requires laboratory experiments to be engineered into a large-scale technology. Up to now only few concepts for scalable devices have been proposed or realized. Here we introduce and realize a concept which, by design, is scalable to large areas and is compatible with multiple thin-film photovoltaic technologies. The scalability is achieved by continuous repetition of a base unit created by laser processing. The concept allows for independent optimization of photovoltaic and electrochemical part. We demonstrate a fully integrated, wireless device with stable and bias-free operation for 40 h. Furthermore, the concept is scaled to a device area of 64 cm2 comprising 13 base units exhibiting a solar-to-hydrogen efficiency of 3.9%. The concept and its successful realization may be an important contribution towards the large-scale application of artificial photosynthesis.
1 September 2015 in Solar Energy Materials and Solar Cells
Direct solar-to-hydrogen conversion via water splitting was demonstrated in an integrated photovoltaic–electrochemical (PV–EC) device using a hydrogenated amorphous silicon thin film tandem junction (a-Si:H/a-Si:H) solar cell as photocathode. The solar cell was adapted to provide sufficient photovoltage to drive both the hydrogen and oxygen evolution reactions. The best results, in terms of photoelectrochemical stability and performance, were obtained with an Ag/Pt layer stack as H2 evolving photocathode back contact and with a RuO2 counter electrode for O2 evolution. Under irradiation by simulated sunlight (AM 1.5 spectrum with 100mW/cm2), we achieved 6.8% solar-to-hydrogen efficiency at 0V applied bias in a two-electrode set-up. This sets a fresh benchmark for integrated thin film silicon tandem based photoelectrochemical devices. In addition, the photovoltage at constant current (−3mA/cm2) was measured over a prolonged period of time and revealed an excellent chemical stability (operation over 50h) of the photocathode. Furthermore, we present an empirical serial circuit model of the PV–EC device, in which the corresponding photovoltaic and electrochemical components are decoupled. This allows for a detailed comparison between the solar cell and the PV–EC cell characteristics, from which the relevant loss processes in the overall system could be identified. The model was further used to compare calculated and measured photocurrent–voltage characteristics of the investigated PV–EC device which showed excellent agreement
16 January 2017 in Journal of Materials Chemistry A
We present a stand-alone integrated solar water-splitting device with an active area of 64 cm 2 and a long-term stable operation. The modular setup of the device provides a versatile tool to integrate and evaluate various combinations of photoelectrodes and catalysts.
27 November 2018 in ACS Applied Materials & Interfaces