Petronilo Martin-Iglesias

Petronilo Martin-Iglesias

Auto-generated profile, based on publicly available information

Petronilo Martin-Iglesias

European Space Agency, Noordwijk, The Netherlands

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 July 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JMJordi Mateu
Jordi Mateu
YYYazid Yusuf
Yazid Yusuf
RPRafael Perea-Robles
Rafael Perea-Robles
CCCarlos Collado
Carlos Collado
AGAlfred Gimenez
Alfred Gimenez
RARobert Aigner
Robert Aigner
This work presents the complete synthesis procedure and circuit transformations needed to go from the characteristic polynomials to the transversal network formed by electroacoustic resonators. This filter topology allows the possibility to achieve any filter response in spite of limited electroacoustic coupling. This is crucial for obtaining very wideband filters with arbitrary positions of transmission zeros. Additional circuit transformations reveal the flexibility of such topology to control other important parameters of the acoustic filter such as the impedance of the resonators and their resonant frequencies, which directly affect the manufacturing process. The transversal topology for electroacoustic filters has been verified by the synthesis, design, fabrication, and measurement of a very wideband filter to meet the requirements of 5G N77 frequency band, centered at 3.75 GHz with 910 MHz of bandwidth.

18 June 2018 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
ADAurelie Dorle
Aurelie Dorle
RGRaphael Gillard
Raphael Gillard
EMEsteban Menargues
Esteban Menargues
MVMaarten Van Der Vorst
Maarten Van Der Vorst
EREmile De Rijk
Emile De Rijk
MGMaria Garcia-Vigueras
Maria Garcia-Vigueras
This article investigates the potential of additive manufacturing for the fabrication of complex antenna geometries with enhanced performance at K-band. Stereolithography is here used to 3D-print a novel topology of dual-polarized leaky-wave antenna that allows for the control of its aperture illumination both in phase and magnitude. The antenna consists of a modulated triple-ridge square waveguide perforated on its top wall with crossed slots of different sizes. An orthomode-transducer is integrated within the structure for dual-mode operation. Monolithic implementation of this compound three-dimensional structure is only possible thanks to additive manufacturing. In addition, low weight and compactness are attained comparing to classical milling. The present proposal is validated through the manufacturing of a low sidelobe levels prototype suitable for intersatellite links. The corresponding measured results are in very good agreement with full-wave predictions.

9 March 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
LQLu Qian
Lu Qian
YWYi Wang
Yi Wang
SLSheng Li
Sheng Li
AMAbd El-Moez A. Mohamed
Abd El-Moez A. Mohamed
Moataz AttallahMoataz Attallah
Moataz Attallah
PMPetronilo Martin-Iglesias
Petronilo Martin-Iglesias
A 3-D printed narrowband bandpass filter based on spherical dual-mode resonators is presented in this article. It is designed for output multiplexers (OMUXs) using high- $Q$ spherical dual-mode resonators. Realization is by laser powder bed fusion (L-PBF) technology of Invar alloy chosen for its low coefficient of thermal expansion (CTE). Using PBF circumvents the alloy’s manufacturability issues associated with its hardness in machining and free forming. Compared with polymer-based vat photopolymerization technology, PBF allows for direct metal manufacture of complex monolithic microwave components with better thermal-mechanical properties and higher power-handling capability. Using Invar can further help achieve high temperature stability of the filter in high-power operation. To demonstrate the proposed solution, detailed thermal-RF test at different temperatures was carried out. The experimental results of a 0.47% fourth-order silver-plated Invar filter with two transmission zeros verify the design and manufacturing. An insertion loss of 1 dB and an effective temperature coefficient of less than 2 ppm/K were achieved.

2 June 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
ADA. Dorle
A. Dorle
RGR. Gillard
R. Gillard
EME. Menargues
E. Menargues
MVM. Van Der Vorst
M. Van Der Vorst
ERE. De Rijk
E. De Rijk
MGM. Garcia-Vigueras
M. Garcia-Vigueras
This paper presents a compact leaky-wave antenna providing circular polarization from a dual-mode hollow waveguide. The monolithic structure is based on a rectangular metallic guide that is perforated with crossed slots. The antenna is fed by a standard WR42 port, which is connected to the leaky waveguide by a transition that allows for dual-mode excitation. The axial ratio is determined by the size of the waveguide section and the dimensions of the crosses. In order to preserve the polarization purity, the geometry of the first radiating elements is modulated. Designed at K-band, the present proposal is suitable for space applications since it relies on a full-metal structure. A design methodology is proposed based on dual-mode dispersion analysis. Selective laser melting is used to monolithically 3D-print the antenna. Measurements are in good agreement with simulations, and the axial ratio is 0.92 dB at 20.5 GHz.

9 August 2018 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JNJia Ni
Jia Ni
JHJiasheng Hong
Jiasheng Hong
PIPetronilo Martin Iglesias
Petronilo Martin Iglesias
A novel compact six-pole intermediate frequency lossy filter based on double-layer microstrip coupled microstrip resonators is proposed in this paper. A detailed theoretical analysis for the performance operation mechanism is illustrated. Significant advantages of the proposed structure over existing lossy filters include its low passband insertion loss variation, compact footprint, and ultra-wide stopband bandwidth. Excellent experimental results are provided to confirm these improvements, by using LCP bonded PCB multilayer technology. In general, the fabricated prototype filter operates at 0.97 GHz, with 0.19-dB insertion loss variation in the passband. In addition, it obtains a sharp selectivity with a pair of transmission zeros, as well as the 10th harmonic suppression with better than the 32-dB rejection level. Good agreement between the measured and simulated results can be observed finally.

16 May 2022 in IEEE Journal of Microwaves
Verified
Journal Article
Open access
DMDaniel Miek
Daniel Miek
MHMichael Höft
Michael Höft
JLJose Antonio Lorente
Jose Antonio Lorente
ABAndre Berger
Andre Berger
DBDominik Brouczek
Dominik Brouczek
VCVittorio Tornielli di Crestvolant
Vittorio Tornielli di Crestvolant
This paper presents a monolithic 3D-printed ceramic X-shaped dual-mode microwave filter. The filter is manufactured utilizing a lithography-based ceramic manufacturing (LCM) process, allowing the realization of the resonator as well as the housing in one single piece. Therefore, contact as well as alignment problems, usually arising between a ceramic in $TM$ mode operation and a metallic enclosure, can conveniently be avoided. A fourth order dual-mode filter with a designed center frequency of 6 GHz and a bandwidth of 279 MHz is realized in alumina material. Practical design rules to be considered in the filter layout process as well as limitations imposed by the LCM approach are discussed. The outer surface of the ceramic cavity is subsequently metallized using a silver spray-coating. Advantageously, the metallization is only a few micrometers thick, wherefore the weight of the component can be reduced. The measurement results are compared to the simulation and reveal good agreement. A temperature stability measurement shows a center frequency downward shift of 0.22%.