9 March 2022 in IEEE Transactions on Microwave Theory and Techniques
A 3-D printed narrowband bandpass filter based on spherical dual-mode resonators is presented in this article. It is designed for output multiplexers (OMUXs) using high- $Q$ spherical dual-mode resonators. Realization is by laser powder bed fusion (L-PBF) technology of Invar alloy chosen for its low coefficient of thermal expansion (CTE). Using PBF circumvents the alloy’s manufacturability issues associated with its hardness in machining and free forming. Compared with polymer-based vat photopolymerization technology, PBF allows for direct metal manufacture of complex monolithic microwave components with better thermal-mechanical properties and higher power-handling capability. Using Invar can further help achieve high temperature stability of the filter in high-power operation. To demonstrate the proposed solution, detailed thermal-RF test at different temperatures was carried out. The experimental results of a 0.47% fourth-order silver-plated Invar filter with two transmission zeros verify the design and manufacturing. An insertion loss of 1 dB and an effective temperature coefficient of less than 2 ppm/K were achieved.
30 May 2024 in IEEE Transactions on Microwave Theory and Techniques
This article presents a novel reconfigurable feed network that allows the switch of antenna arrays across four different polarization states. Different from most previous multipolarization antennas, the reconfiguration is implemented solely in the feed network without disturbing the radiation element. The key enabler is a reconfigurable coupler that switches between two circuit functions—a branch-line coupler or a crossover—through altering the line widths of its parallel branches. This is only made possible by using liquid metals (LMs). A double-pole-double-throw (DPDT) switch, also enabled by LM, is employed to select the input port of the reconfigurable coupler. The switch and the reconfigurable coupler form the reconfigurable feed network, providing four states of excitation to the antenna. The reconfigurable coupler, the switch, and a 2 $\times$ 2 array have been designed and experimentally verified with the LM actuation. As a branch-line coupler, the reconfigurable coupler shows excellent amplitude and phase balance within 0.04 dB ( $\vert\vert S_{{21}}\vert$ – $\vert S_{{31}}\vert\vert$ $<$ 0.04 dB) and 90 $^{\circ}$ at 3.5 GHz, whereas, as the crossover, it has an isolation over 25 dB. The switch exhibits an isolation of 50 dB. The measured peak gain of the array is 14.7 dBic. At 3.5 GHz, the measured axial ratio (AR) associated with the right-hand circular polarization (CP) state is 1.0 dB. The speed of switching and power handling associated with the LM have been discussed. The use of the LM has enabled a unique way of circuit reconfiguration and a full polarization-reconfigurable multifunctional antenna.
8 February 2024 in IEEE Transactions on Microwave Theory and Techniques
The via-pad-slot (VPS) structure, as the switchable element, has been used to demonstrate a single-pole-triple-throw (SPTT) filtering switch and a switchplexer. The VPS can be flexibily switched using liquid metal (LM) or high dielectric constant materials to either cover or uncover the slot. Since the LM only moves on the surface of the VPS and the substrate-integrated waveguide (SIW), the implementation and actuation of the LM is simple and does not cause excessive loss on the device. In the switchplexer design, all channels can be switched on and off to form filters or multiplexers of various channel combinations. Additional transmission zeros (TZs) can be generated by the loaded, partially switched-off channel. The generation of the TZs was discussed and analyzed using coupling matrix approach. The demonstrated X -band (9.56–10.44 GHz) cross-shaped SPTT fifth-order filtering switch exhibits a suppression level of better than 40 dB at 8 and 12 GHz, an insertion loss (IL) of 1.55 dB at 10 GHz, and an isolation level of 58 dB at 10 GHz. The X -band switchplexer operates at three frequency bands, e.g., 11.08–11.55 GHz, 10.61–10.99 GHz, and 9.76–10.33 GHz. The LM-enabled VPS-based switchable element can be integrated with other multifunctional circuits and systems for channel control and reconfiguration.
11 January 2024 in IEEE Journal of Microwaves
In this paper, the design methodology and implementation of single-band and multiple-band elliptic function bandpass filters (BPFs) are presented, based on the concept of bandstop resonator (BSR) sections. One or more single-mode and multiple-mode BSRs can be dangled from a non-resonant node. Each BSR can generate one reflection zeroes (RZ) and one transmission zeroes (TZ). Multiple BSR sections are used to flexibly and independently control the location and bandwidth of the stop bands and therefore the same of the passbands. The method to design single- and multiple-band elliptic function BPFs has been detailed using a number of examples based on waveguide technology. For proof of concept, a 6th-order single-band BPF with six BSR = 2 sections and a 3 rd -order dual-band BPF using three BSR = 3 sections are designed and fabricated monolithically using a selective-laser-melting (SLM) 3-D printing technique. Excellent agreement between simulated and measured results verifies the proposed design methodology and its versatility as well as the additive-manufacture approach.
14 November 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
An irregular-hexagonal resonator geometry is proposed for additively manufactured microwave filters. This geometry allows closely packed resonators to form very compact filters of various topologies fulfilling transfer functions with transmission zeros. It also minimizes the overhangs and allows vertical printing along the direction of the input/output ports, without any internal support structure and with a much-reduced profile. The characteristics of the resonator and the trade-off between compactness and quality factor has been analyzed. Three bandpass filters have been demonstrated. Two of them are designed with non-resonating node topologies with fractional bandwidths of 5% and 1%, respectively, using the step-tuning technique. All three filters are fabricated using selective laser melting (SLM) technique. The performance of the fabricated filters is compared with the EM simulation. Very good agreement has been achieved for all three filters. The effectiveness of tuning has also been demonstrated. The resonator structure has offered high printability in the manufacturing and high level of modularity and flexibility in the design.
24 May 2023 in IEEE Journal of Microwaves
The design concept of a pole-generating resonant iris is demonstrated in rectangular waveguide filters in this paper. Different from conventional reactive iris, the resonant iris can generate an extra transmission pole without increasing the number of resonant cavities. As a result, several design advantages can be gained: (i) a more compact filter structure; (ii) an ability to realize strong coupling and therefore wide bandwidth; and (iii) a new polarization rotation capability. Two third-order Chebyshev filters are designed and implemented, demonstrating the miniaturization and polarization rotation feature. A fifth-order Chebyshev filter with 20% fractional bandwidth is presented to show the capability of realizing wideband. This also demonstrates the realization of asymmetric coupling between the resonant iris and the cavity resonator on either side. An approach to control and extract the coupling between the iris and the cavity resonator has also been presented. To manufacture the intricate asymmetric iris structure, all the presented filters are printed monolithically using selective laser melting technique. Excellent agreement between the measurements and simulations has been achieved, verifying the design concept as well as the additive manufacturing capability in microwave waveguide devices.