4 February 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Silicon carbide (SiC) power devices possess many beneficial properties for power electronics applications, but commercial 62-mm SiC power module packages with the direct drop-in replacement of silicon (Si) devices limit many benefits of these SiC power devices. To fully utilize the advantages of the SiC power devices, this paper presents a low-profile and high power-density packaging solution of a 62-mm 1200V/300A SiC power module with enhanced electrical and thermal performance. The design optimizations on layout, chip placement, and terminal structure are compatible with conventional module fabrication processes. An increase of power density by threefold is achieved with a low-profile package by reducing the height of the terminal connectors. Moreover, lower voltage overshoots of gate-source and drain-source of the proposed module are demonstrated due to low inductance in both gate and power loops. Thermal simulations show that the proposed module has a lower peak junction temperature and a more balanced temperature distribution among parallel devices. Finally, the commercial and fabricated modules were characterized experimentally under the same conditions. Both simulation and experimental results show the gate and power loop inductances of the proposed module are reduced by 96% and 76%, respectively. Moreover, the total switching loss and drain-source voltage overshoot are reduced by 44% and 54%, respectively, at 300 A using a 2 Ω external gate resistor.
12 August 2021 in IEEE Transactions on Power Electronics
Current sensor integration provides many benefits on the power density and reliability of power modules. However, existing current sensors are not suitable for the integration in silicon carbide (SiC) power modules. This paper proposed a low temperature co-fired ceramic (LTCC) based low profile current sensor with mount-ready structure. The current capacity, bandwidth, electrical insulation and thermal expansion performance of the proposed current sensor are fully analyzed and evaluated. The mutual inductance between the designed sensing coil and current carrying conductor is 4nH with a relative error less than 5% compared with finite element analysis (FEA) simulation results. The dynamic current measuring accuracy is verified by double pulse test. The error of first peak measurement is reduced from over 20% to less than 5% by changing the commercial Rogowski coil to the proposed LTCC current sensor. The wide temperature test results show that the proposed current sensor can be applied in high temperature environment conditions.