β-Ga2O3 is a well-known semiconductor material for power devices and other applications. Recently, β-Ga2O3 has also been reported as a scintillator material with a light yield of approximately 8400 ph./MeV, scintillation decay time of <1 μs, and density of 6.44 g/cm3. In this study, 45 cm diameter β-Ga2O3 single crystals were prepared via oxide crystal growth using the cold crucible (OCCC) method under various oxygen partial pressures. In the OCCC method, as in the cold crucible method, a high frequency is applied directly to the oxide materials, which are heated and melted, and the melt is held by the outermost solid material itself that is cooled by water using a copper hearth. In the OCCC method, crystal growth is performed while rotating the seed crystal, as in the Czochralski method, to increase the crystal diameter. The optical properties and radiation responses of the crystals grown under various oxygen partial pressures were evaluated.
Submicrometer diameter phase-separated scintillator fibers (PSSFs) were reported and they possessed both the properties of an optical fiber and radiation-to-light conversion. The PSSFs were fabricated using a directionally solidified eutectic system. High-resolution X-ray imaging can be developed using the PSSFs. In this paper, Tb- and Eu-doped GdAlO 3 (GAP)/ α-Al 2 O 3 eutectic scintillator was grown by the micro pulling down method with various growth rates in order to achieve the high light output and the high light-guiding efficiency. Relationship between radioluminescence intensity and dopant concentration of Eu and Tb was investigated. At the optimized dopant concentration, relationship between growth rate, eutectic period structure, diameter of PSSFs, and contrast transfer function was investigated to achieve high-resolution X-ray imaging.