27 October 2022 in IEEE Transactions on Instrumentation and Measurement
Inexpensive, nonintrusive, and easy-installation current sensors are of great help in the economical and reliable operation of power systems. In this article, a novel contactless current sensor with small size, ultramicro power consumption, and self-power capability is proposed based on tunnel magnetoresistance (TMR). For measuring arbitrary line currents under an interference magnetic field, the single-axis TMR chips array and anti-interference method are introduced. Then, the designs of software and hardware are given for ultralow-power consumption and self-power. The experimental results showed that the measuring range of the current sensor is from 0 to 1500 A, and the error is less than 0.6% when the measured current is over 150 A.
2 August 2022 in IEEE Electron Device Letters
Multi-functional magnetic sensors with tunable measure range can help cover different requirements from detecting weak field to sensing strong field. However, additional control system is often required to realize the tunability, which increases the complexity of device. In this work, we found the current controlled sensitivity and linear range in the NiCo2O4 thin film based anomalous hall sensor. The device owns not only simple structure but also interesting anomalous hall signal whose linearity range and sensitivity can be controlled by current. Ultrahigh sensitivity of 4900 V/(AT) in the range of ±0.2 mT and competitive sensitivity of 20 V/(AT) in the range of ±23 mT are simultaneously realized by tunning the work current. In addition, a memory switching characteristic controlled by magnetic field is further found in the device. These results show that the anomalous hall device has the potential for multifunctional compact device.
9 September 2024 in IEEE Sensors Journal
Detection and analysis of the sulphur hexafluoride (SF 6 ) decomposition product is an effective way to monitor the operating status of gas insulated switchgear (GIS) equipment. To overcome large size, high cost, and difficult maintenance of the traditional detection methods like gas chromatograph, photoacoustic spectroscopy, a sensor array composed of six micro electromechanical system (MEMS) metal oxide semiconductor (MOS) gas sensors was proposed to detect its response to different concentrations of carbon monoxide (CO) and sulfur dioxide (SO 2 ) in SF 6 background in this work. Kendall coefficient was employed to evaluate the selectivity of MEMS sensors to characteristic gases. A number of algorithms were used and compared in qualitative and quantitative detection, and results indicated all the algorithms had classification accuracy over 90%. Among them, the multi-layer perception (MLP) model was the best one for concentration prediction, with which R 2 of 0.90 and 0.74 can be realized for CO and SO 2 , and RMSE are 0.91 and 0.79 for them, respectively. After comparing predication results of MEMS sensor array tested both in air and SF 6 backgrounds, the MEMS sensor array was verified to be more suitable for quantitative detection of CO and SO 2 in the SF 6 background, and its qualitative recognition and quantitative measurement accuracy could be improved by 29.86% and 38.64%, respectively. Due to the small size, high prediction accuracy, the MEMS sensor array has potential of large-scale deployment in online monitoring of GIS operation.
28 March 2024 in IEEE Sensors Journal
In this study, a negative feedback mechanism was implemented in a non-contact voltage sensor to enhance its resistance to external interference. The non-contact sensor relies on capacitance coupling in space between the sensor probe and the power line being measured. However, this configuration leaves the sensor vulnerable to interference caused by environmental changes. The negative feedback mechanism was found to significantly improve the anti-interference properties of the sensor. The sensor exhibited stable voltage sensitivity at 50Hz, operating within a voltage range of 800V, with a nonlinearity of less than 1% between 100 V and 800 V. Additionally, the -3dB frequency bandwidth of the sensor spanned a range from 10Hz to 10kHz, representing a significant improvement over sensors without the feedback design. This compact non-contact voltage sensor, equipped with a feedback structure, holds great potential for applications within distributed sensor networks in smart grids.