30 October 2023 in Light: Science & Applications
A prototype of full-color active-matrix micro-light-emitting diode (micro-LED) micro-display with a pixel density of 391 pixel per inch (ppi) using InGaN/AlGaInP heterogeneous integration is demonstrated. InGaN blue/green dual-color micro-LED arrays realized on a single metal organic chemical vapor deposition (MOCVD)-grown GaN-on-Si epiwafer and AlGaInP red micro-LED arrays are both monolithically fabricated, followed by the integration with a common complementary metal oxide semiconductor (CMOS) backplane via flip-chip bonding technology to form a double-layer thin-film display structure. Full-color images with decent color gamut and brightness are successfully displayed through the fine adjustment of driving current densities of RGB subpixels. This full-color display combines the advantages of high quantum efficiency of InGaN material on blue/green light and AlGaInP material on red light through heterogeneous integration and high pixel density through monolithic fabrication approach, demonstrating the feasibility and prospects of high brightness, good color performance, and high-resolution micro-LED micro-displays in future metaverse applications.
19 December 2024 in IEEE Electron Device Letters
This paper presents the first demonstration of fully-vertical GaN-on-SiC trench MOSFETs enabled by a conductive AlGaN buffer. Good ON-state device performance including a maximum drain current density of 2.43 kA/cm 2 and a high threshold voltage of 5 V has been demonstrated. The relatively high specific ON-resistance at low VDS is a result of a knee voltage induced by the yet to be optimized AlGaN/SiC heterojunction. A breakdown voltage of 334 V has been measured. Compared with quasi-vertical GaN-on-silicon trench MOSFETs, less current crowding effect is observed for fully-vertical GaN-on-SiC trench MOSFETs, as well as a better performance at elevated temperatures.
1 January 2025 in APL Photonics
In this work, we report the growth and fabrication optimization of a long wavelength InAs/GaSb type-II superlattice (T2SL) nBn detector grown by metal–organic chemical vapor deposition. A GaAs like interfacial scheme was employed to grow the T2SLs matched to InAs substrates. A larger bandgap InAs/GaSb T2SL was used as an electron barrier, removing the need for AlSb based materials within this detector. At 77 K and −0.1 V, the photodetector showed a dark current density of 2.2 × 10−2 A cm−2 and a 100% cutoff wavelength of 13 µm. The external quantum efficiency was found to be 54.4% at 9 µm. The peak detectivity was found to be 4.43 × 1010 cm Hz1/2/W at 9 µm, which is very comparable with similar deep etched detectors grown by molecular beam epitaxy.
19 August 2024 in Applied Physics Letters
In this work, we report InAsP-based dislocation filter layers (DFLs) for InP heteroepitaxy on CMOS-standard (001) Si substrates, demonstrating a threading dislocation density of 3.7 × 107 cm−2. The strain introduced by InAsP induces dislocation bending at the InAsP/InP interface, thereby facilitating the reaction and annihilation of dislocations during their lateral glide. Concurrently, the InP spacer exhibits tensile strain, leading to the formation of stacking faults (SFs). With a comprehensive analysis utilizing x-ray diffraction, electron channeling contrast imaging, and transmission electron microscopy, the effects of DFL-induced strain on dislocations and SFs are investigated. Fine-tuning the strain conditions allowed low-dislocation-density while SF-suppressed, anti-phase boundary free InP on Si. This work, therefore, provides a useful buffer engineering scheme for monolithic integration of InP-based electronic and photonic devices onto the industry-standard silicon platform.
10 April 2024 in IEEE Journal of the Electron Devices Society
This letter reports a high-performance fully-vertical GaN-on-SiC p-i-n diode enabled by a conductive n-AlGaN buffer. The buffer conductivity was optimized by tuning the Al composition. The diode presents an ultra-low specific ON-resistance of 0.25 $\text{m}\Omega \cdot $ cm2, a high current swing of 1011, and a high breakdown voltage of 850 V with a 5- $\mu \text{m}$ -thick drift layer, leading to a Baliga’s figure of merit (BFOM) of 2.89 GW/cm2. The diode performance at elevated temperatures and the OFF-state leakage mechanism are analyzed. The demonstrated fully-vertical GaN-on-SiC p-i-n diode with a conductive buffer reveals a simple way towards realizing high-performance fully-vertical GaN-on-SiC devices for high power applications.
1 July 2026 in Journal of Applied Physics
The optical gain characteristics of InAs/InP quantum dot (QD) laser structures grown on an InP (001) substrate has been investigated at room temperature, using the segmented contact stripe length method. Results show that increasing the QD stacking number to five layers enhances the peak net modal gain to 37.5 cm−1 at 3.6 kA/cm2 and increases differential gain, while the three-layer structures provide a lower peak net modal gain of 31.8 cm−1 at 3.6 kA/cm2 but a broader gain spectra at lower current densities due to a lower total density of states requiring fewer filled states for inversion. Furthermore, the choice of capping materials significantly influences QD formation; using an In0.35Ga0.65As capping layer maintains QD-like characteristics, whereas an In0.45Al0.3Ga0.25As capping layer induces a transition to less localized, QD-like structures with a higher peak net modal gain of 41.7 cm−1 at 3.6 kA/cm2.These results suggest that careful optimization of both stacking number and capping layer composition is essential to balance gain requirements for metal-organic chemical vapor deposition grown InAs/InP QD lasers.