16 February 2015 in Applied Physics Letters
We report the use of highly ordered, dense, and regular arrays of in-plane GaAs nanowires as building blocks to produce antiphase-domain-free GaAs thin films on exact (001) silicon. High quality GaAs nanowires were grown on V-grooved Si (001) substrates using the selective aspect ratio trapping concept. The 4.1% lattice mismatch has been accommodated by the initial GaAs, a few nanometer-thick with high density stacking faults. The bulk of the GaAs wires exhibited smooth facets and a low defect density. An unusual defect trapping mechanism by a “tiara”-like structure formed by Si undercuts was discovered. As a result, we were able to grow large-area antiphase-domain-free GaAs thin films out of the nanowires without using SiO2 sidewalls for defect termination. Analysis from XRD ω-rocking curves yielded full-width-at-half-maximum values of 238 and 154 arc sec from 900 to 2000 nm GaAs thin films, respectively, indicating high crystalline quality. The growth scheme in this work offers a promising path towards integrated III-V electronic, photonic, or photovoltaic devices on large scale silicon platform.
1 April 2016 in Optics Letters
Direct integration of high-performance laser diodes on silicon will dramatically transform the world of photonics, expediting the progress toward low-cost and compact photonic integrated circuits (PICs) on the mainstream silicon platform. Here, we report, to the best of our knowledge, the first 1.3 μm room-temperature continuous-wave InAs quantum-dot micro-disk lasers epitaxially grown on industrial-compatible Si (001) substrates without offcut. The lasing threshold is as low as hundreds of microwatts, similar to the thresholds of identical lasers grown on a GaAs substrate. The heteroepitaxial structure employed here does not require the use of an absorptive germanium buffer and/or dislocation filter layers, both of which impede the efficient coupling of light from the laser active regions to silicon waveguides. This allows for full compatibility with the extensive silicon-on-insulator (SOI) technology. The large-area virtual GaAs (on Si) substrates can be directly adopted in various mature in-plane laser configurations, both optically and electrically. Thus, this demonstration represents a major advancement toward the commercial success of fully integrated silicon photonics.
26 November 2018 in Applied Physics Letters
Electrically pumped on-chip C-band lasers provide additional flexibility for silicon photonics in the design of optoelectronic circuits. III–V quantum dots, benefiting from their superior optical properties and enhanced tolerance to defects, have become the active medium of choice for practical light sources monolithically grown on Si. To fully explore the potentials of integrated lasers for silicon photonics in telecommunications and datacenters, we report the realization of 1.5 μm room-temperature electrically pumped III–V quantum dot lasers epitaxially grown on complementary metal-oxide-semiconductor (CMOS)-standard (001) Si substrates without offcut. A threshold current density of 1.6 kA/cm2, a total output power exceeding 110 mW, and operation up to 80 °C under pulsed current injection have been achieved. These results arose from applying our well-developed InAs/InAlGaAs/InP QDs on low-defect-density InP-on-Si templates utilizing nano-patterned V-grooved (001) Si and InGaAs/InP dislocation filters. This demonstration marks a major advancement for future monolithic photonic integration on a large-area and cost-effective Si platform.
30 May 2016 in Applied Physics Letters
Subwavelength micro-disk lasers (MDLs) as small as 1 μm in diameter on exact (001) silicon were fabricated using colloidal lithography. The micro-cavity gain medium incorporating five-stacked InAs quantum dot layers was grown on a high crystalline quality GaAs-on-V-grooved-Si template with no absorptive intermediate buffers. Under continuous-wave optical pumping, the MDLs on silicon exhibit lasing in the 1.2-μm wavelength range with low thresholds down to 35 μW at 10 K. The MDLs compare favorably with devices fabricated on native GaAs substrates and state-of-the-art work reported elsewhere. Feasibility of device miniaturization can be projected by size-dependent lasing characteristics. The results show a promising path towards dense integration of photonic components on the mainstream complementary metal–oxide–semiconductor platform.
20 March 2017 in Applied Physics Letters
Miniaturized laser sources can benefit a wide variety of applications ranging from on-chip optical communications and data processing, to biological sensing. There is a tremendous interest in integrating these lasers with rapidly advancing silicon photonics, aiming to provide the combined strength of the optoelectronic integrated circuits and existing large-volume, low-cost silicon-based manufacturing foundries. Using III-V quantum dots as the active medium has been proven to lower power consumption and improve device temperature stability. Here, we demonstrate room-temperature InAs/InAlGaAs quantum-dot subwavelength microdisk lasers epitaxially grown on (001) Si, with a lasing wavelength of 1563 nm, an ultralow-threshold of 2.73 μW, and lasing up to 60 °C under pulsed optical pumping. This result unambiguously offers a promising path towards large-scale integration of cost-effective and energy-efficient silicon-based long-wavelength lasers.
9 July 2019 in IEEE Journal of Selected Topics in Quantum Electronics
We have developed InP based 1.55 μm lasers epitaxially grown on (001) Si substrates for photonics integration. To overcome the fundamental material challenges associated with mismatch III-V on Si hetero-epitaxy, a Si V-groove epitaxy platform was established, leading to device quality III-V nanostructures and thin films. Combining metal organic chemical vapor deposition (MOCVD) grown 1.55 μm InAs QDs and the InP/Si thin film templates, we have achieved electrically driven 1.55 μm QD lasers on Si operating at room-temperature. To reduce device footprint and energy consumption, a buffer-less integration path by growing InP nano-ridge lasers on pre-patterned silicon-on-insulators (SOI) wafers has been explored. Material and device characterizations and an outlook for device component integration is discussed.