24 August 2020 in Journal of the Society for Information Display
11 April 2019 in IEEE Photonics Technology Letters
An active matrix light emitting diode (LED) micro-display system was demonstrated with GaN-on-Si epilayers and a custom-designed CMOS backplane using an Au-free Cu/Sn-based metal bonding method. The blue micro-LED array consists of $64\times36$ pixels with a pitch size of $40\,\,\mu \text{m}\,\,\times 40\,\,\mu \text{m}$ and a pixel density of 635 pixels/in (ppi). The Si substrate for the LED growth was removed by reactive ion etching (RIE) using SF 6 -based gas after flip-chip bonding. Crack-free and smooth GaN layers in the display area were exposed. Images and videos with 4-bit grayscale could be clearly rendered, and light crosstalk was significantly suppressed compared to its counterpart using the GaN-on-sapphire epilayers. The demonstration suggests the tremendous potential of the low-cost and large-scale GaN-on-Si epilayers and cost-effective Au-free Cu/Sn-based bonding scheme for micro-display applications.
30 October 2023 in Light: Science & Applications
A prototype of full-color active-matrix micro-light-emitting diode (micro-LED) micro-display with a pixel density of 391 pixel per inch (ppi) using InGaN/AlGaInP heterogeneous integration is demonstrated. InGaN blue/green dual-color micro-LED arrays realized on a single metal organic chemical vapor deposition (MOCVD)-grown GaN-on-Si epiwafer and AlGaInP red micro-LED arrays are both monolithically fabricated, followed by the integration with a common complementary metal oxide semiconductor (CMOS) backplane via flip-chip bonding technology to form a double-layer thin-film display structure. Full-color images with decent color gamut and brightness are successfully displayed through the fine adjustment of driving current densities of RGB subpixels. This full-color display combines the advantages of high quantum efficiency of InGaN material on blue/green light and AlGaInP material on red light through heterogeneous integration and high pixel density through monolithic fabrication approach, demonstrating the feasibility and prospects of high brightness, good color performance, and high-resolution micro-LED micro-displays in future metaverse applications.
13 June 2022 in Optics Express
A full-color micro-display via bonding of a InGaN blue/green dual-wavelength light-emitting diode (LED) array and a AlGaInP red LED array is demonstrated. The micro-display has a 120 µm pixel pitch, and each pixel consists of 40 µm × 120 µm red/green/blue (R/G/B) subpixels. The red LED array was integrated with the blue/green dual-wavelength LED array by Au/In flip-chip bonding to achieve full-color emission. Full-color images presented by the micro-display have high brightness and a wide color gamut. This heterogeneous integration technology using conventional LED materials shows the feasibility of a cost-effective approach for reliable high-performance full-color LED micro-displays in virtual reality (VR) and augmented reality (AR) devices.
10 September 2020 in Journal of the Society for Information Display
7 May 2021 in IEEE Photonics Technology Letters
A monolithic thin film red light emitting diode (LED) active-matrix (AM) micro-display driven by a complementary metal-oxide semiconductor (CMOS) driver is demonstrated. The resolution of the micro-display is 64×36, with a 40 μm ×40 μm pixel pitch. Starting from AlGaInP epi-layers grown on GaAs substrates, the monolithic red LED array was fabricated and then integrated with the AM driver using Au/In flip-chip bonding technology. After removal of the GaAs substrate, a crack-free thin film micro-display was realized with a high pixel yield. The thin film red LED AM micro-display delivers a luminance of 2.35×10 4 cd/m 2 at full-load conditions and can render images with 4-bit grayscale. This work not only provides a manufacturing-friendly approach for monolithic thin film red LED micro-displays, but also brings the possibility of hybrid integration with blue/green LEDs to achieve full-color LED micro-displays.