8 August 2022 in IEEE Sensors Journal
This work presents an ultralow-power 10-bit 200-kS/s single-ended successive approximation register (SAR) analog-to-digital converter (ADC) for implantable biosensor applications. A high energy- and area-efficient switching scheme is proposed, which realizes 95.4% energy saving in a digital-to-analog converter (DAC) switching and two times DAC area reduction compared to the conventional single-ended SAR ADC. The common-mode variation in the proposed scheme is input-independent, resulting in a reduced dynamic offset and harmonic distortion. Besides, a low offset and low kickback noise dynamic comparator with P-type input pair is realized. The prototype is fabricated in 65-nm CMOS technology, consuming 94 nW at 0.6-V supply and occupying a 0.02-mm 2 active area. With the Nyquist input frequency, it achieves the signal to noise and distortion ratio (SNDR) of 56.42 dB, leading to a Walden figure of merit (FoM) of 0.87 fJ/conv.-step.
16 June 2023 in IEEE Transactions on Circuits and Systems I: Regular Papers
This article presents a high-speed time-domain (TD) 4-bit/cycle successive approximation register (SAR) analog-to-digital converter (ADC). After converting the voltage input to the time domain, the compact interpolation-based time-to-digital converter (TDC) resolves 4-bit in each SAR cycle with 16 $\times$ linear TD interpolation. This scaling-friendly architecture reduces the number of capacitive digital-to-analog converters (CDACs) and voltage-to-time converters (VTCs) significantly, leading to low power, small area, low kickback noise, and small input loading. A cascade current-starved inverter based VTC is used in the second SAR conversion cycle, which improves voltage-to-time gain and ensures speed and linearity. Besides, to reduce the TD interpolation error and eliminate the short-circuit current, a novel phase interpolator is proposed. A two-way time-interleaved 7-bit 3.8-GS/s prototype ADC was fabricated in a 28-nm CMOS, occupying an active area of 0.01 mm $\rm ^2$ . With a Nyquist input, the measured signal-to-noise and distortion ratio (SNDR) and spurious-free dynamic range (SFDR) are 39.9 and 50.8 dB, respectively. Consuming 7.5 mW at 1.0 V supply, the Walden figure of merit (FoM $\rm _w$ ) is 24.4 fJ/conversion-step.
18 September 2023 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
This brief presents a single-channel 8-bit 1.5-GS/s voltage–time (V-T) hybrid two-step analog-to-digital converter (ADC). Benefiting from the fine quantification in the time domain, the power-to-noise requirement of a comparator and speed limitation in the voltage domain have been significantly relaxed. An efficient cross-coupled linearized technique (CCLT) is proposed in a dynamic voltage-to-time converter (VTC) design as a crucial part of this ADC. This technique helps improve the total harmonic distortion (THD) of VTC by 8 dB across most process–voltage–temperature (PVT) variations by avoiding using a power-harvest current-source (CS)-based VTC. Moreover, a dynamic conversion strategy is proposed in a time quantizer to build a more power-efficient design. Fabricated in a 28-nm CMOS process, the prototype ADC consumes 3.3 mW at 1-V supply with an active area of 0.0035 mm $^{\rm 2}$ . With a Nyquist input, it achieves a signal-to-noise and distortion ratio (SNDR) and spurious-free dynamic range (SFDR) of 45.4 and 60.3 dB, respectively, yielding a Walden figure of merit (FoM $_{\rm W}$ ) of 14.4 fJ/conversion-step.