Nano- and micro-electromechanical systems (N/MEMSs) are traditionally based on electrostatic or piezoelectric coupling, which couples electrical and mechanical energy through acoustic resonator structures. Most recently, N/MEMS devices based on magnetoelectrics are gaining much attention. Unlike electrostatic or piezoelectric N/MEMS that rely on an AC electric field or voltage excitation, magnetoelecric N/MEMS rely on the electromechanical resonance of a magnetostrictive/piezoelectric bilayer heterostructure exhibiting a strong strain-mediated magnetoelectric coupling under the excitation of a magnetic field and/or electric field. As a consequence, magnetoelectric N/MEMS enable unprecedented new applications, ranging from magnetoelectric sensors, ultra-compact magnetoelectric antennas, etc. This Tutorial will first outline the fundamental principles of piezoelectric materials, resonator design, specifically different acoustic modes, and piezoelectric-based N/MEMS applications, i.e., radio frequency front end filters and infrared radiation sensors. We will then provide an overview of magnetoelectric materials and N/MEMS focusing on the governing physics of the magnetoelectric effect, magnetic material properties for achieving high magnetoelectric coupling, state-of-the-art magnetoelectric N/MEMS devices, and their respective applications.
17 July 2020 in Journal of Microelectromechanical Systems
In this paper, for the first time we demonstrate zero-power volatile-organic-chemical (VOC) detectors based on micromechanical switches suitable for plant health monitoring. Differently from state-of-the-art active chemical sensors, the device presented here exploits a completely passive, chemically-sensitive switch based on a bimaterial micro-cantilever and a passive switch-based readout mechanism to detect VOCs exceeding a pre-determined concentration released by unhealthy plants. When exposed to target VOCs, the polymer/metal bimaterial beam bends downward and trigger the switch due to the stress induced from the absorption of chemicals in the polymer layer. Here we show experimental demonstrations of detecting toluene, hexenol (cis-3-Hexen-1-ol, a chemical released from plants under attack by pests) and ethanol, respectively, with our fabricated prototypes. The demonstrated high sensitivity to ethanol (~ 8 nm/ppm) and hexenol (~ 3.3 nm/ppm) was achieved by the optimization of device geometries showing a great promise of the proposed technology to ultimately achieve 10s ppm detection limit (with a sub-micron contact gap and voltage bias) which is required for the device operation in close proximity to a plant in an open environment. [2020-0190]
20 January 2022 in IEEE Transactions on Electron Devices
This article demonstrates, for the first time, a zero-power ultrasonic wakeup receiver for intra-body communication with Implantable Medical Devices (IMDs). The system is based on a 10 x 10 Piezoelectric Micromachined Ultrasonic Transducer (pMUT) array, a zero-power 500 nm gap MEMS plasmonic switch, a low-leakage CMOS load-switch, and an ad hoc sensing circuit. An ultrasonic signal of 10 mVpp is received by the pMUT array at a distance of 5 cm and brings the MEMS switch from the off-state (1 pA) to the on-state (20 μ A) when biased at 9.09 $V_{DC}$ . This small current then wakes up the load-switch (<10 nW when off), which powers up the sensing circuit to decode the pMUT signal. The system is demonstrated in a tissue phantom, making it ideal for intrabody communication.
Agricultural sensors are powerful tools to optimize crop productivity while conserving natural resources. Here we report a crop water-stress detector based on a plasmonically-enhanced micromechanical photoswitch capable of detecting water content in leaves that is lower than a predetermined threshold without consuming electrical power when the leaf is healthy. The detection mechanism exploits the energy in a specific narrow-spectral band of solar radiation reflected off leaves that is strongly correlated to the water content in plants. This biosensor relies on a spectrally selective infrared plasmonic absorber and a thermally sensitive micro-cantilever to harvest the reflected solar energy and further produce a digitized wakeup-bit only when the monitored leaf is water-stressed. In particular, we demonstrate that the detector activates a commercial water pump when a soybean plant is water-stressed. The 10-year battery lifetime of the proposed detector pave the way for the development of high-granularity, maintenance-free sensor networks for large-scale smart-farms.
9 February 2022 in Journal of Microelectromechanical Systems
This paper presents an in-depth thermomechanical analysis of zero-power micromechanical photoswitches (MPs) aiming at aggressive performance enhancement for applications that require ultralow infrared (IR) detection threshold. An accurate analytical model was first derived and used to maximize the thermal sensitivity of the MPs through a loop-based optimization program. With specific pre-defined boundary conditions, such a program can be used to generate a set of device geometrical parameters leading to highest possible thermal sensitivity without sacrificing the structural strength of the device (i.e., spring constant), which otherwise will have to be done with time-consuming numerical simulations. The optimized MPs show more than 4 times improvement in thermal sensitivity compared to previous demonstrations, thanks to the high thermal resistance and temperature sensitivity achieved using the thermomechanical model. The demonstrated theoretical analysis and thermomechanical optimization methods for the MPs are critical for the development of the next-generation zero-power IR sensors specifically designed for applications that require ultra-sensitive IR detection capability without compromising their sensor size, weight and power consumption. [2021-0231]
This paper reports on zero standby power human presence detectors based on an optimized micromechanical photoswitch (MP) with a metasurface-enhanced long wavelength infrared (LWIR) absorber, increased thermal sensitivity, reduced bias voltage, and a wide field-of-view. The reported device shows the capability of detecting a human body around 2.65 m and human hand around 1 m distance using low bias voltages without using any focal lenses. Existing wireless motion detectors based on pyroelectric IR sensors consume ∼100 μW power on standby continuously and produce frequent false alarms due to non-relevant objects (such as moving cars and falling leaves), which inevitably drains the battery in a relatively short period of time (typically less than a year). The demonstrated zero-power sensor here exploits the LWIR energy emitted from a human body for true presence detection without consuming any electrical power on standby. The first experimental demonstration of human body detection with vacuum packaged MP at a distance comparable to commercial motion detectors is enabled by the optimization of an MP in terms of thermomechanical performance (thermal sensitivity ∼1.5 nm/nW, stiffness ∼0.2 nN/nm, and threshold ∼10 nW) and IR absorption (η > 60% in λ = 6-14 μm, field-of-view ∼110 °). The new broadband LWIR metasurface absorbers improve the structural symmetry of MP by matching the material stacks of reflecting and absorbing heads. This improvement allows the MP to work with lower voltage bias thus, making it compatible with low-power electronics.