23 December 2022 in Advanced Electronic Materials
Traditional computation based on von Neumann architecture is limited by time and energy consumption due to data transfer between the storage and the processing units. The von Neumann architecture is also inefficient in solving unstructured, probabilistic, and real‐time problems. To address these challenges, a new brain‐inspired neuromorphic computational architecture is required. Due to the absence of resistance–capacitance delay, high bandwidth, and low power consumption, optoelectronic artificial synaptic devices are highly attractive. Yet, stable, scalable, and complementary metal–oxide–semiconductor (CMOS)‐compatible materials exhibiting both inhibitory and excitatory optoelectronic synaptic functionalities have not been demonstrated. Here, epitaxial CMOS‐compatible scandium nitride (ScN) optoelectronic artificial synaptic devices that emulate both inhibitory and excitatory biological synaptic activities are presented. The negative and positive persistent photoconductivity of undoped and magnesium‐doped ScN is equated to the inhibitory and excitatory synaptic plasticity, respectively, which leads to functionalities like learning–forgetting, frequency‐selective optical filtering, frequency‐dependent potentiation and depression, Hebbian learning, and logic‐gate operations. Temperature‐dependent photoresponse and photo‐Hall measurements reveal that scattering of photogenerated carriers from charged defect centers results in negative photoconductivity in undoped degenerate ScN. This work opens up the possibility of utilizing a group‐III epitaxial semiconducting nitride material with inhibitory and excitatory optoelectronic synaptic functionalities for practical neuromorphic applications.
20 May 2022 in ACS Applied Energy Materials
22 September 2023 in Physical Review Letters
Traditionally, the Coulomb repulsion or Peierls instability causes the metal-insulator phase transitions in strongly correlated quantum materials. In comparison, magnetic stress is predicted to drive the metal-insulator transition in materials exhibiting strong spin-lattice coupling. However, this mechanism lacks experimental validation and an in-depth understanding. Here we demonstrate the existence of the magnetic stress-driven metal-insulator transition in an archetypal material, chromium nitride. Structural, magnetic, electronic transport characterization, and first-principles modeling analysis show that the phase transition temperature in CrN is directly proportional to the strain-controlled anisotropic magnetic stress. The compressive strain increases the magnetic stress, leading to the much-coveted room-temperature transition. In contrast, tensile strain and the inclusion of nonmagnetic cations weaken the magnetic stress and reduce the transition temperature. This discovery of a new physical origin of metal-insulator phase transition that unifies spin, charge, and lattice degrees of freedom in correlated materials marks a new paradigm and could lead to novel device functionalities.
23 November 2020 in Applied Physics Letters
Scandium nitride (ScN) is an emerging rock salt indirect bandgap semiconductor and has attracted significant interest in recent years for thermoelectric energy conversion, as a substrate for defect-free GaN growth, as a semiconducting component in single-crystalline metal/semiconductor superlattices for thermionic energy conversion, as well as for Al1−xScxN-based bulk and surface acoustic devices for 5G technologies. Most ScN film growth traditionally utilizes physical vapor deposition techniques such as magnetron sputtering and molecular beam epitaxy, which results in stoichiometric films but with varying crystal quality, orientations, microstructures, and physical properties. As epitaxial single-crystalline ScN films with smooth surfaces are essential for device applications, it is important to understand the ScN growth modes and parameters that impact and control their microstructure. In this Letter, we demonstrate that large adatom mobility is essential to overcome the Ehrlich–Schwoebel (E–S) and grain boundary migration barriers and achieve defect (voids, dislocations, stacking faults, etc.)-free single-crystalline ScN films. Using the substrate temperature to tune adatom mobility, we show that nominally single-crystalline ScN films are achieved when the homologous temperature is higher than ∼0.3. For homologous temperatures ranging from 0.23 to 0.30, ScN films are found to exhibit significant structural voids in between pyramidal growth regions with multiple in-plane orientations resulting from additional lateral growth off the facets of the pyramids and broken epitaxy after ∼80 nm of growth. The in-depth discussion of the growth modes of ScN presented here explains its varying electrical and optical properties and will help achieve high-quality ScN for device applications.
22 November 2024 in Science Advances
Plasmon resonance represents the collective oscillation of free electron gas density and enables enhanced light-matter interactions in nanoscale dimensions. Traditionally, the classical Drude model describes plasmonic excitation, wherein plasma frequency exhibits no spatial dispersion. Here, we show conclusive experimental evidence of the breakdown of plasmon resonance and a consequent metal-insulator transition in an ultrathin refractory plasmonic material, hafnium nitride (HfN). Epitaxial HfN thick films exhibit a low-loss and high-quality Drude-like plasmon resonance in the visible spectral range. However, as the film thickness is reduced to nanoscale dimensions, Coulomb interaction among electrons increases because of electron confinement, leading to the spatial dispersion of plasma frequency. With a further decrease in thickness, electrons lose their ability to shield the incident electric field, turning the medium into a dielectric. The observed metal-insulator transition might carry some signatures of Wigner crystallization and indicates that such transdimensional, between 2D and 3D, films can serve as a promising playground to study strongly correlated electron systems.
22 November 2021 in Physical Review Materials
Epitaxial metal-semiconductor heterostructures with suitable Schottky barrier can lead to high thermoelectric figure-of-merit (zT) due to selective filtering of low-energy electrons as well as reduced thermal conductivity from phonon scattering at the interfaces. Lattice-matched vertical metal-semiconductor multilayer/superlattices as well as metallic nanoparticles embedded inside semiconducting hosts have been studied intensively to explore their thermoelectric properties. However, development of in-plane metal-semiconductor heterostructures and exploration of their physical properties have remained elusive primarily due to the growth and fabrication challenges. In-plane heterostructures are expected to be more suitable for planar integration and should exhibit unique properties. In this work, we demonstrate an in-plane metal-semiconductor heterostructure that exhibits an improved thermoelectric power factor. The in-plane heterostructure is deposited by controlling the Cr-flux during deposition that leads to an in-plane phase separation between the metallic- and semiconducting CrN grains. Temperature-dependent electrical transport exhibits an Arrhenius-type thermal activation behavior with an activation energy of 70 meV, and an in-plane electrical conductivity that is about two orders of magnitude higher than that of CrN. The Seebeck coefficient also remained moderately large at −150 μV/K at 700K leading to a very large power factor of at 700 K.