1 July 2024 in ECS Journal of Solid State Science and Technology
In this paper, we have effectively demonstrated 150 nm-gate-length AlGaN/GaN high electron mobility transistors (HEMTs) on 4-inch SiC substrate. The 150 nm gate-length was accomplished by utilizing traditional I-line stepper photolithography, together with a nitride spacer side-wall. This method offers superior processing efficiency compared to E-beam lithography with high wafer uniformity. The devices processed with this spacer side-wall aided method demonstrated comparable electrical performances as that of E-beam processed one with fT of 45 GHz, fMAX of 80 GHz, Pout of 31 dBm and PAE of 45% at 29 GHz, which can be imported to large scale manufacturing.
7 October 2024 in Applied Physics Letters
I-line stepper is widely used in large scale device manufacturing with limited achievable critical dimension by itself. With the aid of the spacer sidewall, the critical dimension can be further shrunk down. Spacer sidewall aided process necessitates an additional deposition-etching process, which inevitably results in process related damage under the gate. This paper proposes an optimized spacer sidewall aided gate patterning procedure for 0.15 μm GaN High Electron Mobility Transistors (HEMTs) fabrication. The process is proved to be effective in improving device performance compared to conventional sidewall process by keeping first Si-rich SiN passivation layer integrity at the gate edge. Interface trap density (Dit) and mobility were extracted for both conventional sidewall process and the optimized one with different passivation layers at the gate edge, demonstrating a lower Dit and higher mobility using the optimized process with enhanced device performances, such as higher current, breakdown voltage, and stress state characteristics, compared to the conventional process, which is promising for mass production of 0.15 μm GaN HEMTs.
27 May 2024 in Electronics Letters
In this letter, molybdenum nitride (MoN) gate AlGaN/GaN HEMT has been investigated with MoN developed in various physical vapour deposition (PVD) conditions. The Schottky gate is studied through forward and reverse characteristics with different processed MoN, which is compared with the standard Ni gate. Similar DC and radio frequency (RF) performances are obtained with MoN and Ni gate, while MoN demonstrated higher reliability than Ni gate through RF aging test.