Saswat Biswapriya Dash

Saswat Biswapriya Dash

Auto-generated profile, based on publicly available information

Saswat Biswapriya Dash

Department of Civil Engineering, Indian Institute of Technology 1 , Guwahati, Assam 781039

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 May 2024 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
SDSaswat Biswapriya Dash
Saswat Biswapriya Dash
RCRajan Choudhary
Rajan Choudhary
AKAnkush Kumar
Ankush Kumar
ASAshish Sharma
Ashish Sharma
An asphalt mix comprises asphalt binder and aggregates of different sizes (coarse and fine) and filler. Even with a smaller share, filler plays a crucial role in the performance of asphalt-filler mastics. The study is motivated by the growing need to preserve natural resources and aims to investigate the utilization of four different industrial by-products/wastes (electric arc furnace slag filler, basic oxygen furnace slag filler, tire pyrolysis char filler, and plastic pyrolysis char filler, and one conventional natural stone aggregate filler (NSAF) in asphalt-filler mastics. Four conditioning environments were used to characterize the chemo-rheological properties of the mastics formulated by these five different fillers: unaged, long-term aged, freeze-thaw, and freeze-thaw of long-term aged mastics. To understand the significance of filler attributes in the filler-asphalt mastic performance, a correlation between various filler characteristics (specific surface area, Rigden voids, methylene blue value, and hydrophilic coefficient) and the mastic properties (multiple stress creep and recovery, linear amplitude sweep, binder yield energy test, and Fourier transform infrared spectroscopy) was also attempted. The fatigue life and elastic recovery of the mastics were negatively affected by the combined effects of aging and moisture. The filler characteristics showed a negligible-to-low association with fatigue parameters and a good correlation with rutting performance. The use of these industry co-products/by-products as fillers is supported by the superior rutting and fatigue performance of steel slag and pyrolytic char fillers compared with the traditional NSAF.

7 February 2025 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
ASAshish Sharma
Ashish Sharma
RCRajan Choudhary
Rajan Choudhary
AKAnkush Kumar
Ankush Kumar
SDSaswat Biswapriya Dash
Saswat Biswapriya Dash
Open-graded asphalt friction courses (OGAFCs) offer benefits in terms of the absence of rainwater film, high skid resistance, low tire-pavement interaction noise, and better visibility under wet weather. Among the critical problems of binder draindown, raveling, and clogging encountered with OGAFCs, binder draindown is the one that can be largely resolved by using fiber with appropriate length, dosage, and type. With the growing interest in sustainable materials in road construction, the application of agro waste–derived natural fibers in pavements forms an innovative domain of research. In this study, four agro waste–derived biofibers, including banana fiber, sisal fiber, sunnhemp fiber, and pineapple fiber, were investigated as stabilizing agents to address the binder draindown challenge within OGAFC mixes. A response surface methodology (RSM) was used to optimize the fiber parameters of four agro waste–derived fibers for their application in OGAFC mixtures fabricated with unmodified and polymer-modified binders. RSM-based models were developed using three distinct input parameters: fiber lengths ranging from 3 to 12 mm, fiber dosages ranging from 0.15 to 0.45 %, and binder dosages ranging from 5.5 to 6.5 %, as well as one output parameter, binder draindown. The RSM-based developed regression models were statistically significant, with average R2 and adjusted R2 values higher than 0.9830 and 0.9695, respectively. Furthermore, the desirability function used to optimize fiber parameters yielded a desirability value greater than 0.84 for each developed model, indicating an exceptional level of predictive precision. Finally, during the model validation phase, an average percentage error deviation of 5.61 % demonstrated the efficacy of the RSM approach for fiber parameter optimization. The RSM-based optimization for each model with both binders, followed by parameter validation, yielded optimal values of 0.45 %, 9 mm, and 5.5 % for fiber dosage, fiber length, and binder dosages, respectively.

16 December 2024 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
PDF file
ASAshish Sharma
Ashish Sharma
RCRajan Choudhary
Rajan Choudhary
AKAnkush Kumar
Ankush Kumar
SDSaswat Biswapriya Dash
Saswat Biswapriya Dash
As an agrarian economy, India produces the second-largest amount of agricultural waste globally. The practices of indiscriminately disposing of this waste in open lands or burning it in agricultural fields give rise to significant environmental and health concerns. With an increasing need for sustainable road construction materials and practices, engineers are continuously looking for the use of agricultural and plantation-based resources, particularly natural fibers. In order to address problems like binder draindown and raveling associated with high binder content and low fine content, this study focuses on the open-graded friction course (OGFC), which incorporates fibers. Under the investigation on the potential applications of natural fibers, including banana fiber (BNF), sisal fiber (SIF), pineapple fiber (PNF), sunn hemp fiber (SHF), and cellulose fiber (CLF), the study assesses various mix design parameters across 12 combinations, including bulk density, air voids, stone-on-stone contact, binder draindown, and abrasion loss (aged and unaged) at different binder contents, fiber lengths, and dosages. Results indicate an optimum binder content of 6.0 % for all fiber-reinforced OGFC mixes. Grey relational analysis and indirect tensile strength (ITS) tests further validate the improved performance of these mixes, showcasing reduced draindown, and abrasion loss, and enhanced ITS with the incorporation of natural fibers. The comprehensive evaluation of mix design properties ranks BNF as the top-performing, followed by PNF, SIF, and SHF, as indicated by the grey relational grade. This research emphasizes the potential of using agricultural waste for sustainable infrastructure development and promoting eco-friendly practices in the construction industry.

1 March 2026 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
ASAshish Sharma
Ashish Sharma
RCRajan Choudhary
Rajan Choudhary
SDSaswat Biswapriya Dash
Saswat Biswapriya Dash
AKAnkush Kumar
Ankush Kumar

2 September 2026 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
ASAshish Sharma
Ashish Sharma
RCRajan Choudhary
Rajan Choudhary
SDSaswat Biswapriya Dash
Saswat Biswapriya Dash
AKAnkush Kumar
Ankush Kumar
The growing volume of agricultural waste and its improper management has led to severe environmental problems, particularly the one arising because of the open-field burning of crop residue. Agro-waste-based natural fibers have attracted significant interest as sustainable additives for bituminous mix applications. The use of natural fibers can effectively minimize the binder drainage, paricularly in gap- and open-graded bituminous mixes. Their wider use, however, has been limited by inherent limitations, including hydrophilic properties and weak interfacial bonding with the bituminous binder, particularly in the presence of moisture. As a remedial measure to the aforementioned challenges, modifying the surfaces of natural fibers has emerged as a promising approach. This study provides a systematic review of popular chemical and physical treatment methods for natural fibers and their application in bituminous mixes. The review study categorizes major treatment methods, such as chemical treatments (alkali, silane, permanganate, and acetylation) and physical treatments (plasma, corona, ultraviolet irradiation, and steam explosion), and then systematically compares their advantages, disadvantages, and suitability in bituminous mixes. Moreover, the behavior of bituminous mixes reinforced with chemically treated natural fibers is critically discussed in terms of the main performance factors, including rutting, fatigue behavior, moisture damage, and low-temperature cracking. Also, the factors related to optimizing fiber dosage, cost, and sustainability are discussed. The findings emphasize the possibility of chemically treated natural fibers to improve the functioning and longevity of bituminous mixes and encourage the use of agro-waste derived natural fibers. Lastly, critical conclusions are drawn, and future research directions are identified to enable the successful implementation of natural fibers in bituminous road construction works.

1 September 2026 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
ASAshish Sharma
Ashish Sharma
RCRajan Choudhary
Rajan Choudhary
SDSaswat Biswapriya Dash
Saswat Biswapriya Dash
Open-graded friction courses (OGFCs) are specialized bituminous mixes characterized by a highly open aggregate skeleton (around 90 % coarse aggregate) and a high air void content (18–22 %). The unique characteristics of OGFC mixes allow the quick drainage of surface water, wet-weather safety by reducing hydroplaning, and splash-spray. However, despite the aforesaid benefits, the combined presence of high air voids, limited fine aggregates, and high binder content requirements increases the risks of binder draindown, especially during mixing, transportation, and placement of these mixes, which may accelerate raveling, moisture damage, and premature deterioration. Stabilization of OGFC mixes with fiber application is quite often practiced to control binder draindown; however, sustainable alternatives to conventional synthetic fibers remain limited attributed to compatibility and durability concerns associated with untreated natural fibers. This study investigates the use of two agro-based natural fibers (i.e., sunnhemp fiber (SHF) and sisal fiber (SIF)) procured from two different sources, after chemical modification using sodium hydroxide (NaOH) and potassium permanganate (KMnO4) for the stabilization of OGFC mixes. The response surface methodology was employed to optimize NaOH treatment parameters, including soaking duration, soaking temperature, and NaOH dosage. Thereafter, the OGFC mixes incorporating the optimally treated fibers with an optimal fiber length (9 mm), optimal fiber dosage (0.45 %), and optimum binder dosage (0.45 %), using two binder types (an unmodified binder (VG40) and a polymer modified binder (PMB)), were evaluated for a series of laboratory tests. These tests include binder absorption, binder draindown, boiling water, Cantabro abrasion loss, permeability, and moisture-damage resistance. Statistical analysis was also performed to assess the influence of various treatment parameters on the performance of OGFC mixes incorporating chemically treated agro-based fibers. The results indicated that OGFC mixes containing NaOH-treated SHF fibers from source 1, combined with a PMB binder, demonstrated superior performance, underscoring the feasibility of treated agro-waste-derived natural fibers as sustainable stabilizers for OGFC applications.