19 April 2022 in Nature Communications
Quantum dot (QD) light-emitting diodes (LEDs) are emerging as one of the most promising candidates for next-generation displays. However, their intrinsic light outcoupling efficiency remains considerably lower than the organic counterpart, because it is not yet possible to control the transition-dipole-moment (TDM) orientation in QD solids at device level. Here, using the colloidal lead halide perovskite anisotropic nanocrystals (ANCs) as a model system, we report a directed self-assembly approach to form the anisotropic nanocrystal superlattices (ANSLs). Emission polarization in individual ANCs rescales the radiation from horizontal and vertical transition dipoles, effectively resulting in preferentially horizontal TDM orientation. Based on the emissive thin films comprised of ANSLs, we demonstrate an enhanced ratio of horizontal dipole up to 0.75, enhancing the theoretical light outcoupling efficiency of greater than 30%. Our optimized single-junction QD LEDs showed peak external quantum efficiency of up to 24.96%, comparable to state-of-the-art organic LEDs.
12 April 2019 in Helvetica Chimica Acta
5 December 2023 in Advanced Materials
Self‐powered skin optoelectronics fabricated on ultrathin polymer films is emerging as one of the most promising components for the next‐generation Internet of Things (IoT) technology. However, a longstanding challenge is the device underperformance owing to the low process temperature of polymer substrates. In addition, broadband electroluminescence (EL) based on organic or polymer semiconductors inevitably suffers from periodic spectral distortion due to Fabry–Pérot (FP) interference upon substrate bending, preventing advanced applications. Here, ultraflexible skin optoelectronics integrating high‐performance solar cells and monochromatic light‐emitting diodes using solution‐processed perovskite semiconductors is presented. n–i–p perovskite solar cells and perovskite nanocrystal light‐emitting diodes (PNC‐LEDs), with power‐conversion and current efficiencies of 18.2% and 15.2 cd A−1, respectively, are demonstrated on ultrathin polymer substrates with high thermal stability, which is a record‐high efficiency for ultraflexible perovskite solar cell. The narrowband EL with a full width at half‐maximum of 23 nm successfully eliminates FP interference, yielding bending‐insensitive spectra even under 50% of mechanical compression. Photo‐plethysmography using the skin optoelectronic device demonstrates a signal selectivity of 98.2% at 87 bpm pulse. The results presented here pave the way to inexpensive and high‐performance ultrathin optoelectronics for self‐powered applications such as wearable displays and indoor IoT sensors.
9 November 2022 in ACS Nano
31 October 2025 in Nature Photonics
Miniaturization of light-emitting diodes below the diffraction limit of the emission wavelength can enable super-resolution imaging and on-chip light sources for ultrabroadband chiplet communication. Organic light-emitting diodes, although suitable for miniaturization due to their emission from localized excitons, suffer from the limited compatibility of organic materials with traditional photolithographic patterning. Here we develop a method for the scalable fabrication of nanoscale organic light-emitting diodes with pixel densities up to 100,000 pixels per inch, periodicity of 250 nm and the smallest pixel size in the order of 100 nm. We realize the direct nanoscale patterning of organic semiconductors by self-aligned nanostencil etching and lithography. The process is resist-free and involves etching and evaporation through nanoapertures in a free-standing film adhering to the substrate. A nanoscale organic light-emitting diode surface with over 1 megapixel exhibits an average external quantum efficiency of 13.1%. We also demonstrate electroluminescent metasurfaces with subwavelength-scale meta-atoms that can electrically modulate the emitted light. The diffractive coupling between nanopixels enables control over the far-field emission properties of light, including directionality and polarization. These results pave the way for hybrid integrated photonics technologies, including visible-light communication, lasing and high-resolution displays.
20 June 2024 in Advanced Optical Materials
Quantum‐confined CsPbI3 perovskite nanoplatelets (NPLs) are highly desirable for optoelectronic applications owing to their anisotropic electronic properties that substantially boost the light outcoupling efficiency in light‐emitting diodes (LEDs). However, the structural instability of the emissive CsPbI3 phases makes it degrade rapidly to the non‐emissive δ‐phase under ambient conditions. Here, the study presents a synthetic approach to produce spectrally stable CsPbI3 nanoplatelets (NPLs) through solid‐phase crude reactions with metal iodide powders, MI2 (M2+ = Mn2+ or Zn2+). The synthesized NPLs exhibit narrow and color‐pure red emission with high photoluminescence (PL) quantum yields (QYs, ηPL) of up to 85%. Systematic investigations into the surface chemistry of NPLs reveal that metal iodide treatment stabilizes anisotropic CsPbI3 NPLs via surface passivation with metal and halide ions, substantially hindering from the formation of non‐emissive yellow phase. The anisotropic NPLs display signatures of spontaneous self‐assembly in spin‐casted films, which yield strong emission anisotropy, with up to 82% of the transition dipoles being horizontally oriented with respect to the substrate, as revealed by the back focal plane (BFP) imaging. The results presented here shed light on solid‐phase approaches for the preparation of quantum‐confined nanocrystals (NCs) with desirable geometry, which boost the light outcoupling efficiency in LEDs.