Ultraflexible optical devices have been used extensively in next-generation wearable electronics owing to their excellent conformability to human skins. Long-term health monitoring also requires the integration of ultraflexible optical devices with an energy-harvesting power source; to make devices self-powered. However, system-level integration of ultraflexible optical sensors with power sources is challenging because of insufficient air operational stability of ultraflexible polymer light-emitting diodes. Here we develop an ultraflexible self-powered organic optical system for photoplethysmogram monitoring by combining air-operation-stable polymer light-emitting diodes, organic solar cells, and organic photodetectors. Adopting an inverted structure and a doped polyethylenimine ethoxylated layer, ultraflexible polymer light-emitting diodes retain 70% of the initial luminance even after 11.3 h of operation under air. Also, integrated optical sensors exhibit a high linearity with the light intensity exponent of 0.98 by polymer light-emitting diode. Such self-powered, ultraflexible photoplethysmogram sensors perform monitoring of blood pulse signals as 77 beats per minute.
Self‐powered skin optoelectronics fabricated on ultrathin polymer films is emerging as one of the most promising components for the next‐generation Internet of Things (IoT) technology. However, a longstanding challenge is the device underperformance owing to the low process temperature of polymer substrates. In addition, broadband electroluminescence (EL) based on organic or polymer semiconductors inevitably suffers from periodic spectral distortion due to Fabry–Pérot (FP) interference upon substrate bending, preventing advanced applications. Here, ultraflexible skin optoelectronics integrating high‐performance solar cells and monochromatic light‐emitting diodes using solution‐processed perovskite semiconductors is presented. n–i–p perovskite solar cells and perovskite nanocrystal light‐emitting diodes (PNC‐LEDs), with power‐conversion and current efficiencies of 18.2% and 15.2 cd A−1, respectively, are demonstrated on ultrathin polymer substrates with high thermal stability, which is a record‐high efficiency for ultraflexible perovskite solar cell. The narrowband EL with a full width at half‐maximum of 23 nm successfully eliminates FP interference, yielding bending‐insensitive spectra even under 50% of mechanical compression. Photo‐plethysmography using the skin optoelectronic device demonstrates a signal selectivity of 98.2% at 87 bpm pulse. The results presented here pave the way to inexpensive and high‐performance ultrathin optoelectronics for self‐powered applications such as wearable displays and indoor IoT sensors.
Ultrathin perovskite solar cells (PSCs), defined as flexible devices with total thicknesses below 10 μm, are promising candidates for next‐generation space photovoltaics owing to their extremely low weight and high mechanical compliance. Although the radiation tolerance of rigid PSCs has been widely studied, that of flexible—particularly ultrathin—PSCs remains insufficiently explored, mainly due to radiation‐induced staining and degradation of conventional plastic substrates under high‐dose gamma‐ray irradiation. Here, we demonstrate 4 μm‐thick ultrathin flexible PSCs fabricated on radiation‐stable parylene/SU‐8 substrates, exhibiting exceptional gamma‐ray tolerance under severe total ionizing dose (TID) conditions. The parylene/SU‐8 substrate preserves optical transparency and mechanical compliance after irradiation, effectively suppressing substrate‐induced staining artifacts. Consequently, the ultrathin PSCs retain 99% of their initial power conversion efficiency after exposure to 890 krad (Si). By comparison with rigid PSCs, we show that irradiation‐induced short‐circuit current loss and fill‐factor enhancement originate from the PSC stack itself rather than from the substrate, with the current reduction being consistent with phase segregation in the perovskite layer. These results highlight radiation‐stable ultrathin substrates and interface design as key enablers for highly radiation‐tolerant ultrathin PSCs for future space applications.
Understanding surface forces of two-dimensional (2D) materials is of fundamental importance as they govern molecular dynamics in nanoscale proximity. Despite recent understanding of substrate-supported 2D monolayers, the intrinsic surface properties of 2D materials remain vague. Here we report on a repulsive Lifshitz-van der Waals force generated in proximity to the surface of suspended graphene. In combination with our theoretical model taking into account the flexibility of graphene, we directly measured repulsive forces using atomic force microscopy. An average repulsive force of up to 1.4 kN/m2 has been detected at separations of 8.8 nm between a gold-coated tip and a sheet of suspended graphene, more than two orders of magnitude greater than the long-range Casimir-Lifshitz repulsion demonstrated in fluids. Our findings imply that suspended 2D materials could exert repulsive forces on any approaching electroneutral object in close proximity, resulting in substantially lower wettability. This could offer technological opportunities such as molecular actuation and quantum levitation.
Flexible organic optical devices have been used extensively in next-generation wearable electronics owing to advantages such as light-weight, thinness, and flexibility. Making such organic optical devices ultrathin enables long-term monitoring of health conditions owing to the increased conformability of ultrathin devices to human skin. Long-term biological signal monitoring also requires the integration of organic optical devices with an energy harvesting power sources which does not require recharging; to make devices self-powered. However, system-level integration of such thin organic optical sensors with power sources is challenging. An important obstacle to this type of integration is the insufficient operational stability of ultrathin organic light-emitting diodes under ambient air conditions. Here we develop an ultrathin self-powered organic optical system for photoplethysmogram (PPG) monitoring. This system consists of three types of ultrathin electronic devices: polymer light-emitting diodes (PLEDs), organic solar cells, and organic photodetectors. By adopting an inverted structure and a polyethylenimine ethoxylated layer doped with 8-hydroxyquinolinato-lithium as the electron-transport layer, PLEDs exhibit improved operational stability under ambient air conditions without external encapsulation. Ultraflexible PLEDs with no passivation retain 70% of the initial luminance lifetime of 11.3 h under ambient air. Integrated optical sensors exhibit a high linearity with the light intensity exponent of 0.98 by PLED light source. Such self-powered, ultraflexible PPG sensors can perform long-term stable monitoring of blood pulse signals on human hands.
1 January 2019 in The Proceedings of Mechanical Engineering Congress, Japan
Development of light and flexible power harvester has been attracting great attention as a next breakthrough power solution especially in wearable device field. Organic photovoltaics (OPVs) based on polymer active layers is one of the promising energy harvesters in such a field. The improvement of power conversion efficiency (PCE) is one of the most important topics for OPVs. While some work has sought to improve the PCE by the development of active layer materials, other work has shown increased PCEs by nano-patterning relatively thick (order of 100 μm) polymer film substrates. However, it is difficult to do nano-patterning on thin 1 μm substrates because extremely susceptible to damage when using conventional patterning methods. Here, we show the periodic nano-grating pattern with pitch of 760nm and maximum height of 112 nm were reproduced onto the surface of thin 1μm substrates by fabricating patterned fluorinated layer as a remover layer. Furthermore, ultra-thin OPVs having nano-grating substrate were exhibited high efficiency compare with non-patterned ultra-thin OPVs and achieved PCE of 10.4 %.