6 February 2017 in Science China Technological Sciences
17 October 2014 in Science China Technological Sciences
2 March 2024 in International Journal of Heat and Mass Transfer
1 October 2024 in Physics of Fluids
This study numerically investigates the impact of micro-blowing/suction parameters on the flow and heat transfer characteristics. Different models and parameters are evaluated by energy saving rate and comprehensive performance coefficients. The numerical results indicate that micro-blowing reduces the wall friction drag, while micro-suction increases the wall friction, and the magnitude of drag reduction (or drag increase) increases with the augment of the micro-blowing/suction coefficient. The maximum drag reduction rates of the three models are 2.60%, 3.59%, and 3.83%, respectively. When micro-blowing and micro-suction are arranged at the bottom and top of the channel, respectively, or both arranged at the bottom of the channel, the Nusselt number increases by at least 69.75% and 89.45%, respectively. The arrangement of micro-blowing and micro-suction both arranged at the bottom of the channel is optimal for heat transfer and drag reduction. In addition, with the present three arrangements, energy saving in the channel flow can be achieved.
1 November 2022 in Physics of Fluids
In this paper, the flow behavior and heat transfer characteristic in a rectangular channel are numerically investigated. The non-uniform thermal boundary condition is arranged along the streamwise direction at the bottom of the rectangular channel. Furthermore, based on the flow field parameters obtained with numerical simulation, the dynamic modal decomposition (DMD) is carried out for viscous layer, buffer layer, and logarithmic region, respectively. The numerical results show that the hot bands of non-uniform thermal boundary affect the interaction of the velocity streaks along the streamwise direction, which reduces the vorticity of the buffer layer and the fluctuation of the velocity gradient vector. In the terms of entropy analysis, it can be found that the hot bands of non-uniform thermal boundary play a similar role of “riblets” and block the self-sustainment of the turbulent coherent structures. Moreover, the results of DMD manifest that the hot bands of non-uniform thermal boundary can improve the stability of viscous layer and buffer layer. The development of turbulent boundary layer is delayed by affecting the fluid characteristics in buffer layer. Compared to the channel without non-uniform thermal boundary condition, the maximum drag reduction rate of 8.35% can be achieved in considered cases, while a reduction in heat transfer performance of 2.74% occurs. In addition, the comprehensive performance coefficient increases slightly to 1.0013.