15 December 2017 in IEEE Transactions on Sustainable Energy
The rural villages situated in the east coast zone of India are facing acute shortage of electrical power which considerably affects the overall development of the region. Major sources of energy poverty in this locality are from low voltage and intermittent power supply from the existing utility systems. Mismatch between the demand and supply for the long transmission and distribution systems is the major cause of such situations. In this paper, an attempt has been made to solve this long standing problem economically, using a feasible energy co-operative based wind-solar hybrid generation system. This generated power will be distributed among co-operative registered designated loads through a standalone hybrid micro-grid system within the scope of the regulations in the national deregulated electricity market. Besides, both technical and non-technical power losses associated with the existing utility systems can be significantly curbed through the proposed energy co-operative scheme. The scheme has been satisfactorily implemented using MATLAB Simulink and HOMER Pro-3.2 simulation tool and validated through a prototype experimental setup. The laboratory testing is carried out through a 10kW generation and utilization system, which can be customized further for the wide-area rural power supply.
12 January 2021 in IEEE Transactions on Consumer Electronics
Recent advances of energy management system in a smart home can lead to load monitoring of electrical appliances for energy saving and reduction of electricity bill. Thus, smart metering technology is getting widely implemented in several electricity distribution networks. Most of the existing research are concentrated towards individual power consumption of different household loads using some machine learning algorithm, which can increase computational burden of the processor. In this article, an improved method for estimation of the individual appliance current is carried out from a group of connected consumer electronics loads. The proposed method consists of two steps, first is to collect and store the current data of individual appliances with varying load for on line application. The second step is to estimate the individual load current using the stored data. In the proposed method, a search-based optimization, i.e., Artificial Bee Colony (ABC) algorithm is used for the estimation of individual electrical load. Suitable simulations and experimental studies are carried out on a practical household system to demonstrate the suitability of the proposed methodology.
11 March 2022 in IEEE Transactions on Industrial Electronics
Bidirectional dc–dc converter (BDC) is an integral part of energy storage interface, where high efficiency, high voltage transfer ratio and small input ripple current are essential for application, such as dc microgrid and electric vehicle. In this article, a new approach is proposed to achieve reduced input ripple current at the low voltage side, which potentially replaces the necessity of using interleaved circuit structure. Parallel coupled inductor and capacitor circuit are utilized for charging and discharging the two parallel paths in a complementary fashion using a mosfet . The proposed solution helps to increase the voltage conversion ratio unlike interleaved structure. Additionally, in proposed BDC, zero voltage switching turn on operation of all active switches are possible utilizing synchronous rectification principle in both the operating modes. Parallel path structure not only reduce the input current ripple, but also helps to share the input current, thereby reducing the coil size and associated losses. A 250 W BDC is designed to validate performance in 1kW dc microgrid system
6 July 2021 in IEEE Transactions on Instrumentation and Measurement
With the advancement of smart residential buildings, houseowners are increasingly interested to monitor the connected electrical loads in view of energy conservation and load management. Smart grid technology in the distribution system includes cutting-edge load monitoring applications, permitting efficient use of electrical energy. Nonintrusive load monitoring (NILM) technique is such a tool to recognize the consumption of energy for individual electrical loads in a residential system at a solitary point of measurement. In this article, an improved NILM method is proposed using a shunt passive filter installed at the source end of residential building with the help of current harmonic signature analysis. A fuzzy rule-based intelligent identification method is employed in order to detect and monitor different electrical loads considering various load features at the utility side. The major contribution of the proposed technique is the improvement in identification accuracy of household loads with multiple appliances. The connected filter additionally restricts the injected harmonics generated by the loads at the source end. The usage of the fuzzy technique also reduces the processor memory requirement than conventional machine learning techniques. Simulations backed by experimental results validate the viability of the proposed methodology.
24 November 2020 in IEEE Transactions on Industry Applications
Multi-Level Inverters (MLI) has wide applications due to their numerous advantages. An improved configuration of eleven-level MLI suitable for medium voltage range has been proposed in this paper. The proposed topology contains two half-bridge sub-modules (HBSM), one flying capacitor (FC) MLI and one full bridge sub-module (FBSM). A simple method of capacitor voltages balancing (CVB) has been demonstrated with less ripple. The study about the effectiveness of proposed MLI has been justified by loss calculation to find efficiency and voltage ripple analysis of capacitor. The comparative assessment in terms of switch count, driver count, capacitor requirement, device peak inverse voltage (PIV), total standing voltage (TSVp.u), cost function etc. for developed hybrid inverter (HI) topology has been presented to establish the utility of the proposed HI. This topology has been checked for its operation under various operating conditions including frequency and modulation index (MI) variation, over-modulation range and also with motor load. The grid connectivity option of the proposed HI has been verified to ensure the suitability for application with renewables.
26 July 2022 in IEEE Access
In this work, a searching space minimization-based particle swarm optimization (SSM-PSO) scheme has been proposed for maximum power point tracking (MPPT) in a doubly fed induction generator (DFIG) based wind energy conversion system (WECS). DFIG displays non-linearity in $P-\omega $ characteristics. So different types of conventional and optimization-based schemes are developed for MPPT. The drawbacks in the conventional perturb and observe (P&O) scheme has been successfully abolished by the proposed SSM-PSO method. Because of its weather-insensitive nature, the conventional P&O MPP tracking scheme results in the fluctuation of DFIG output under a sudden change in wind speed. To avoid this problem, maximum and minimum limits for the optimal rotor speed have been determined in the proposed SSM-PSO scheme. Further, the obtained limits for rotor speed are employed to improve the searching space within the non-linear $P-\omega $ curve. This initial confinement of particles to a limited searching space in SSM-PSO results in a faster response of the system. Since the proposed SSM-PSO is atmosphere sensitive, it avoids fluctuations under an abrupt variation in wind velocity. The improved initialization part of SSM-PSO leads to better dynamic characteristics compared to existing P&O and optimization-based schemes. The proposed SSM-PSO scheme is implemented for a 2MW DFIG system in MATLAB Simulink atmosphere and showed satisfactory results.