State Key Laboratory of Optical Fiber and Cable Manufacture Technology, Department of Electronic and Electrical Engineering, Southern University of Science and Technology, Shenzhen, China
Auto-generated profile, based on publicly available information
Wentao Xu
State Key Laboratory of Optical Fiber and Cable Manufacture Technology, Department of Electronic and Electrical Engineering, Southern University of Science and Technology, Shenzhen, China
In this paper, we propose an integrated sensing and backscatter communication system utilizing high scanning-rate slot array antennas (SAAs) in a frequency-diverse configuration, leveraging an inverse scattering approach. This system employs a frequency diversity scheme to facilitate rapid spatial data acquisition, significantly outperforming traditional mechanical and electronic scanning methods in terms of speed and cost-efficiency. The proposed integrated system achieves simultaneous localization, identification, and backscatter communication of tags within cluttered environments. Our approach analyzes backscatter process based on the structural and antenna modes of tags, as well as the presence of clutter scatterers. By modulating the tags between open-circuit and short-circuit states, we effectively extract the structural and antenna mode components. The structural mode component allows us to sense both the tags and the surrounding clutter scatterers, while the antenna mode component is used for precise tag identification by incorporating both inverse scattering and compressive sensing (CS) algorithms. During these processes, channel state information (CSI) is gathered through the antenna mode, enhancing the backscatter communication capability of the system. Additionally, the efficacy of backscatter communication is assessed using the bit error rate (BER) with the maximum ratio combining (MRC) technique. Simulations and experimental results demonstrate that our proposed system can accurately sense and identify tags amidst clutter scatterers while maintaining robust backscatter communication over a 40 MHz bandwidth within the 3.98-4.02 GHz range. These results highlight the significant advantages of employing the proposed frequency-diverse antennas and the inverse scattering approach in integrated backscatter communication and sensing applications.
This paper reports on a tunable bandstop filter (BSF) with both flexible center frequency and bandwidth. The tunable BSF is based on half-mode substrate integrated waveguide (HMSIW), of which the broadside is coupled with reconfigurable resonators. Using liquid crystal (LC) material as the substrate, a tunable stopband could be obtained by adjusting the bias voltage of the interdigitated microstrip resonator on LC. In order to increase the tunable range of stopband bandwidth, two additional open resonators are implemented at the broadside of HMSIW cavity. For practical validation, the bandstop HMSIW filter using LC is designed and fabricated. Numerical results demonstrate that,by adjusting the voltages of three resonators on LC, either the lower or the higher cutoff frequency could be controlled independently, leading to the flexible and independent tuning ranges of both center frequency from 4.9 to 5.4 GHz and 3-dB bandwidth of stopband from 1.2 to 1.8 GHz (@5.1 GHz).
29 June 2022 in IEEE Transactions on Antennas and Propagation
A compact high gain omnidirectional horizontally polarized (OHP) antenna array is proposed in this communication. The theoretical calculations prove that a slender aperture with uniform field distribution can achieve OHP radiation with high directivity. The rectangular patch antenna operating in TM10 mode is employed to obtain an element with the specific field distribution. To extend the electrical length of the aperture, the element is elongated and four colinear elements are integrated as an array without any redundant structures. Benefitted from the reasonable electric field distribution and concise configuration, the aperture efficiency is significantly improved. Therefore the proposed antenna can achieve high gain OHP radiation in a compact size. The overall dimension of the antenna array is 4.62λ × 0.22λ × 0.07λ (λ is the free space wavelength at the center frequency). Measured results verify that the impedance bandwidth of the array covers 5.46–6.13 GHz with a relative bandwidth of 11.6%, a maximum realized gain of 11 dBi, and good omnidirectional characteristics with a gain variation of less than 3 dB in the entire operating bandwidth.
7 October 2024 in IEEE Antennas and Wireless Propagation Letters
In this letter, we propose an extremely high scanning-rate slot array antenna utilizing uniplanar-coupled waveguide cavities, allowing for easy fabrication and a low-profile planar implementation. In contrast to the current technique employing an alternating electric and magnetic coupling topology, the proposed new architecture relies on a combination of pure-magnetic coupling topology and phase reversal radiators, which allows high scanning rate beam scanning around broadside. We design and fabricate both metallic waveguide and substrate integrated waveguide implementations to showcase the effectiveness of the proposed technique. Experimental results demonstrate that the two uniplanar-coupled waveguide antennas can scan angle ranges of 65° and 70°, respectively, within a 40MHz frequency band centered at 4GHz (equivalent to a 1% bandwidth). Compared to state-of-the-art methods, these proposed frequency-scanning antennas exhibit exceptionally high scanning rates, ease of fabrication, and a low-profile implementation.
10 September 2025 in IEEE Transactions on Antennas and Propagation
High-scanning-rate full-space scanning leaky-wave antennas (LWAs), capable of sweeping beams seamlessly across the entire space within a narrow frequency band, have gained increasing favor for integrated sensing and communication applications. However, conventional high-scanning-rate LWAs based on homogeneous or quasi-homogeneous metamaterials face a fundamental trade-off between dispersion and loss, which limits their efficiency. This paper addresses this issue by proposing a non-homogeneous periodic structure that combines a low-dispersion radiating transmission line with a high-Q, high-dispersion resonant network. Unlike prevailing structures based on quasi-homogeneous, high-dispersion radiating transmission lines, the proposed antenna offers both a high scanning rate and enhanced efficiency due to the high-dispersion and high-Q characteristics of the loading network. Two illustrative examples utilizing 3rd-order and 5th-order resonant networks are designed and implemented, respectively. Experimental results demonstrate that these antennas can scan the entire space within the frequency ranges of 4.55−5.8 GHz and 4.9−5.9 GHz, respectively, with measured efficiencies of 70% and 55%, respectively.