This paper is centered on the phenomenological description of spark-less discharges to displays. It analyzes the conduction currents injected onto the glass and the displacement currents flowing through the glass for spark-less discharges to metal-backed glass such as an liquid crystal display (LCD). Further, it provides a full-wave simulation model to reproduce the displacement current flowing through the glass into the display's inner electronic structures. The currents can reach 10 A having pulse widths of tens of nanoseconds. Discharge voltage levels, polarities, approach speed, and humidity influences were investigated. Lichtenberg's dust figure method was used to help visualize the charge distribution and residual charges after surface discharging.
4 April 2018 in IEEE Transactions on Electromagnetic Compatibility
Quad form-factor pluggable (QSFP) interconnections shielding cages with heatsinks are often optimized for thermal, mechanical, and volume manufacturing. In this paper, shielding effectiveness (SE) of QSFP cages, including two configurations of 1 × 1 and 1 × 6 with three cases of normal (i.e., rising) heatsink, without a heatsink, and with a modified heatsink, is measured for the frequency range of 1-40 GHz using a dual reverberation chamber. For each measurement, three different vendors of optical modules are utilized and averaged SE is achieved for each case, indicating that the rising heatsink degrades the SE around 5-10 dB compare to the no heatsink or modified heatsink. Further, energy parcels and their trajectory concept are applied to visualize the coupling paths in a rising heatsink. The rising heatsink creates a new coupling path for EM waves to leak to the cage and emit from the chassis faceplate. From the energy parcel results, an electromagnetic interference (EMI) mitigation technique is proposed for the newly created coupling path by the rising heatsink, and its performance is evaluated with SE measurements. Further, a measurement is performed with an active board using a 40-Gbps optical module with and without the EMI mitigation technique.
22 October 2019 in IEEE Transactions on Electromagnetic Compatibility
The underlying cause of most electrostatic discharge is tribocharging. Thus, understanding tribocharging is essential to assess the likelihood of damages as they might occur in the production of Liquid crystal display (LCD) screens. In this paper, a study of triboelectric charge build-up between the glass and rollers during the glass transfer process in display panel manufacturing is presented. A roller conveyor system was fabricated and two types of rollers materials, insulative and dissipative, with radii of 30 and 90 mm, were considered. To measure the triboelectric charge of the glass, a Faraday cup with an elevator system was mounted on the apparatus. Various parameters including transfer velocity, acceleration/deceleration, and relative humidity were investigated. For instance, it is observed that the average saturated charge density on the glass is 0.324 nC/cm2 after 320-m displacements if it transfers by small dissipative rollers with condition of 200 mm/s and 200 mm/s2. In addition, a comprehensive study of the surface potential distribution on the glass and rollers by utilizing a two-dimensional automated scanner is presented. The experiments pointed out that the amount of charge accumulated on the glass for the dissipative rollers saturated faster with a smaller value than the insulative rollers.