Chao Zhang

Chao Zhang

Auto-generated profile, based on publicly available information

Chao Zhang

State Key Laboratory of Millimeter Waves, School of Information Science and Engineering, Southeast University, Nanjing, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 October 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
BYBu-Yun Yu
Bu-Yun Yu
ZWZhe-Han Wang
Zhe-Han Wang
LJLu Ju
Lu Ju
CZChao Zhang
Chao Zhang
ZLZhen-Guo Liu
Zhen-Guo Liu
WLWei-Bing Lu
Wei-Bing Lu
In this article, we demonstrate a flexible and wearable hybrid radio frequency (RF) and solar energy harvesting system for powering wearable electronic devices. The system consists of a flexible transparent antenna, a flexible transparent rectifying circuit, and an amorphous silicon solar cell. By utilizing transparent stacked structure, the rectenna and the solar cell can provide more hybrid output power to accommodate more application scenarios. The flexible transparent antenna shows two impedance matching bandwidths of 3.5–3.578 and 4.79–5.09 GHz, covering n78/n79 fifth-generation (5G) communication frequency band and 5-GHz WiFi frequency band. At the frequency of 3.5 GHz, the flexible transparent rectifying circuit achieves a high RF-to-dc conversion efficiency of 54.67% at 13 dBm RF input power. In the room with a light intensity of 210 lux, compared with a single solar cell, the hybrid energy harvesting system can obtain an additional 35.6%–769.5% output power when the RF source power is varied from 4 to 10 dBm. These results demonstrate that the proposed flexible and wearable RF-solar energy harvester can provide reliable electric power supply, which can be a potential candidate for powering wearable electronic devices, distributed sensors and IOT devices.

30 March 2022 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
ZLZhen-Guo Liu
Zhen-Guo Liu
CZChao Zhang
Chao Zhang
RYRen-Jie Yin
Ren-Jie Yin
WLWei-Bing Lu
Wei-Bing Lu
A novel multifunctional low-profile Fabry–Perot resonator (FPR) antenna integrated with solar cells (SCs) is proposed in this communication. It is mainly composed of a transparent partially reflective surface (PRS), a patch radiator, and an artificial magnetic conductor (AMC) made of SCs array. On the upper layer, the PRS is made of the transparent copper microgrid to perform the function of partial reflection as well as ensure that sufficient solar energy can be captured by the SCs. Here, the SCs array acting as AMC can reduce the profile of the FPR antenna, on the other hand, it can collect solar energy and convert it into direct current (dc) power to provide energy supply of the device. Through this design, the SCs and FPR antenna are well combined compatibly together. The proposed antenna is fabricated and verified, the measured results demonstrate that the proposed multifunctional FPR antenna has a realized gain of 11.5 dBi with high aperture efficiency of 58.3% and a good low-profile characteristic (approximately $\lambda _{0}$ /6). The measured output power of SCs can reach to 600 $\mu \text{w}$ . The work proposed in this communication illustrates the multifunctional requirements of antenna with high radiation properties, low profile, and the capability of power harvesting, simultaneously. It may be a good scheme for self-powered occasions, such as outdoor and satellite communication devices.

3 April 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
CZChao Zhang
Chao Zhang
ZLZhen-Guo Liu
Zhen-Guo Liu
SLShu-Han Liu
Shu-Han Liu
MSMeng Shen
Meng Shen
This article introduces a multifunctional wireless power transfer (WPT) system, uniquely capable of self-sustaining power generation and automatic directional charging. This system integrates a retrodirective array (RDA), loaded with active radio frequency (RF) circuits, with solar cells (SCs), thus enabling the RDA to function as a transmitter in the WPT system independently, without reliance on external power sources. This integration facilitates direct solar-to-RF energy conversion while simultaneously achieving self-tracking and targeted RF energy transmission to the device requiring recharging. The proposed system comprises three primary components: the transmitter represented by solar antenna with retrodirective capability, the receiver at the terminal comprising a rectenna, and the power management circuit (PMC) designed for harvesting solar energy and energizing the RF active circuits. The feasibility of the proposed WPT system is substantiated through simulations, assemblies, and measurement processes. Both monostatic and bistatic radar cross section (RCS) measurements were conducted. The outcomes of these measurements demonstrate the WPT system’s proficiency in far-field tracking, facilitating both signal reception and transmission across a significant angular range of $-$ 40 $^{\circ}$ to 40 $^{\circ}$ . Furthermore, the rectifier antenna consistently maintains an optimal output voltage within this angular range. The system’s SC exhibits remarkable efficiency, fully charging a 70-mF supercapacitor within 30 s via the PMC. The proposed work holds the effective merge for multienergy synergy and interaction systems, opening up an ingenious pathway to the utilization of solar and RF energy in WPT systems.

14 April 2025 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
SXShao-Hua Xing
Shao-Hua Xing
CZChao Zhang
Chao Zhang
MLMeng-Zi Li
Meng-Zi Li
XBXin-Zhi Bo
Xin-Zhi Bo
SLShu-Han Liu
Shu-Han Liu
ZLZhen-Guo Liu
Zhen-Guo Liu
This paper presents an effective decoupling method aimed at simultaneously enhancing both decoupling bandwidth and impedance bandwidth through independently controlling multiple mutual coupling nulls. This innovative approach addresses the broadband decoupling requirements of stacked microstrip patch antennas (S-MPAs) in multiple-input multiple-output (MIMO) systems. A novel integration of laminated resonators (LR), defected ground structures (DGS), and cosine-curve-shaped coupled line resonators (CLR) is employed to construct and regulate multiple mutual coupling nulls. Using this methodology, we proposed a low-profile two-element S-MPA array and experimentally confirmed the simultaneous enhancement of decoupling bandwidth and impedance bandwidth. The mutual coupling levels at the low-frequency (5.6 GHz) and high-frequency (5.8 GHz) nulls are -56.89 dB and -53.93 dB, respectively. Additionally, the effectiveness of this method is extended and validated in three-element arrays, where measured results indicate mutual coupling levels between adjacent and non-adjacent antenna units remaining below -30.93 dB. This confirms the scalability and mutual coupling nulls tunability of the proposed methodology for multi-coupling path suppression for stacked antenna arrays.

26 May 2025 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MGMing-Yang Geng
Ming-Yang Geng
Hao ChenHao Chen
Hao Chen
JZJun-Lin Zhan
Jun-Lin Zhan
CZChao Zhang
Chao Zhang
LJLu Ju
Lu Ju
WLWei-Bing Lu
Wei-Bing Lu
In this communication, we propose a fabric electromagnetic (EM) energy harvesting (EH) platform using absorbing metasurface for body-worn application. The fabric EMEH platform contains the multiband absorbing metasurface, a matched rectifier circuit and an energy management circuit, in which the absorbing metasurface is composed of a periodic array of bow-tie dipoles and zigzag dipoles, enabling multiband operation across different frequencies. And unit cells of each column in absorbing metasurface array are connected to transfer and gather energy together by the build-in channel. The maximum simulated specific absorption rate (SAR) on a human torso model is 0.31 W/kg, lower than the maximum allowable limit of 1.6 W/kg. Then, a 5 × 5 array is designed and fabricated. Experimental results show that a dc power of 521 μW is collected from the source at 80 cm when the power density arriving at the absorbing surface is 19.69 uW/cm2. Further, to illustrate the potential of EMEH platform, we construct an autonomous and self-sustainable system for powering wearable and low-power sensors using the proposed EMEH platform.

10 February 2026 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
CZChao Zhang
Chao Zhang
ZKZheng-Hao Kou
Zheng-Hao Kou
SXShao-Hua Xing
Shao-Hua Xing
YZYi-Xuan Zeng
Yi-Xuan Zeng
ZLZhen-Guo Liu
Zhen-Guo Liu
This article introduces a novel, compact, fully textile-based multifunctional system that, for the first time, simultaneously achieves near- and far-field (NFF) communication and wireless power transfer (WPT) capabilities within a truly wearable platform. The proposed hybrid system covers the three most widely used frequency bands and supports multiple functionalities simultaneously. The near-field communication (NFC) and energy-harvesting functions are realized by a coil antenna operating at a frequency of 13.56 MHz; the body-centric communication function is achieved by an antenna that operates at 2.45 GHz and adopts omnidirectional radiation mode; and the power transfer function is implemented by an antenna operating at 5.8 GHz with directional radiation mode and a rectifier circuit. In virtue of the shared-aperture design, the entire system features simplicity, compactness, and low profile, making it more suitable for integration on all-textile substrates. Measurement results show that the body-centric communication operates in the frequency band of 2.43–2.53 GHz, and the power transfer covers the frequency band of 5.72–5.96 GHz. The interband isolation between the two antennas is better than −30 and −25 dB, respectively, thus ensuring minimal interference between system functions and reliable multimode operation. The rectifier achieves a maximum conversion efficiency of 70%. In addition, the NFC and energy-harvesting modules support data exchange (reading and writing) and can deliver an output voltage of 1.4 V when used with existing commercial smartphones, which demonstrates the remarkable communication and energy-harvesting capabilities. Finally, the proposed design was experimentally evaluated under practical wearable conditions. These results demonstrate that the system can simultaneously perform its intended functionalities while maintaining excellent compatibility with IoT platforms.