16 April 2007 in IEEE Transactions on Robotics
Efficient path-planning algorithms are a crucial issue for modern autonomous underwater vehicles. Classical path-planning algorithms in artificial intelligence are not designed to deal with wide continuous environments prone to currents. We present a novel Fast Marching (FM)-based approach to address the following issues. First, we develop an algorithm we call FM* to efficiently extract a 2-D continuous path from a discrete representation of the environment. Second, we take underwater currents into account thanks to an anisotropic extension of the original FM algorithm. Third, the vehicle turning radius is introduced as a constraint on the optimal path curvature for both isotropic and anisotropic media. Finally, a multiresolution method is introduced to speed up the overall path-planning process
1 January 2007 in The Journal of the Acoustical Society of America
This paper uses advanced time-frequency signal analysis techniques to generate new models for bio-inspired sonar signals. The inspiration comes from the analysis of bottlenose dolphin clicks. These pulses are very short duration, between 50 and , but for certain examples we can delineate a double down-chirp structure using fractional Fourier methods. The majority of clicks have energy distributed between two main frequency bands with the higher frequencies delayed in time by . Signal syntheses using a multiple chirp model based on these observations are able to reproduce much of the spectral variation seen in earlier studies on natural dolphin echolocation pulses. Six synthetic signals are generated and used to drive the dolphin based sonar (DBS) developed through the Biosonar Program office at the SPAWAR Systems Center, San Diego, CA. Analyses of the detailed echo structure for these pulses ensonifying two solid copper spherical targets indicate differences in discriminatory potential between the signals. It is suggested that target discrimination could be improved through the transmission of a signal packet in which the chirp structure is varied between pulses. Evidence that dolphins may use such a strategy themselves comes from observations of variations in the transmissions of dolphins carrying out target detection and identification tasks.
23 July 2018 in Applied Physics Letters
We report size and density/compressibility-based particle sorting using on-off quasi-standing waves based on the frequency difference between two ultrasonic transducers. The 13.3 MHz fundamental operating frequency of the surface acoustic wave microfluidic device allows the manipulation of particles on the micrometer scale. Experiments, validated by computational fluid dynamics, were carried out to demonstrate size-based sorting of 5–14.5 μm diameter polystyrene (PS) particles and density/compressibility-based sorting of 10 μm PS, iron-oxide, and poly(methyl methacrylate) particles, with densities ranging from 1.05 to 1.5 g/cm3. The method shows a sorting efficiency of >90% and a purity of >80% for particle separation of 10 μm and 14.5 μm, demonstrating better performance than similar sorting methods recently published (72%–83% efficiency). The sorting technique demonstrates high selectivity separation of particles, with the smallest particle ratio being 1.33, compared to 2.5 in previous work. Density/compressibility-based sorting of polystyrene and iron-oxide particles showed an efficiency of 97 ± 4% and a purity of 91 ± 5%. By varying the sign of the acoustic excitation signal, continuous batch acoustic sorting of target particles to a desired outlet was demonstrated with good sorting stability against variations of the inflow rates.
1 June 2010 in The Journal of the Acoustical Society of America
To date most sonars use narrow band pulses and often only the echo envelope is used for object detection and classification. This paper considers the advantages afforded by bio-inspired sonar for object identification and classification through the analysis and the understanding of the broadband echo structure. Using the biomimetic dolphin based sonar system in conjunction with bio-inspired pulses developed from observations of bottlenose dolphins performing object identification tasks, results are presented from experiments carried out in a wave tank and harbor. In these experiments responses of various targets to two different bio-inspired signals are measured and analyzed. The differences in response demonstrate the strong dependency between signal design and echo interpretation. In the simulations and empirical data, the resonance phenomena of these targets cause strong notches and peaks in the echo spectra. With precision in the localization of these peaks and dips of around 1 kHz, the locations are very stable for broadside insonification of the targets and they can be used as features for classification. This leads to the proposal of a broadband classifier which operates by extracting the notch positions in the target echo spectra.
1 September 2019 in The Journal of the Acoustical Society of America
Synthetic aperture sonar (SAS) provides high-resolution acoustic imaging by processing coherently the backscattered acoustic signal recorded over consecutive pings. Traditionally, object detection and classification tasks rely on high-resolution seafloor mapping achieved with widebeam, broadband SAS systems. However, aspect- or frequency-specific information is crucial for improving the performance of automatic target recognition algorithms. For example, low frequencies can be partly transmitted through objects or penetrate the seafloor providing information about internal structure and buried objects, while multiple views provide information about the object's shape and dimensions. Sub-band and limited-view processing, though, degrades the SAS resolution. In this paper, SAS imaging is formulated as an ℓ1-norm regularized least-squares optimization problem which improves the resolution by promoting a parsimonious representation of the data. The optimization problem is solved in a distributed and computationally efficient way with an algorithm based on the alternating direction method of multipliers. The resulting SAS image is the consensus outcome of collaborative filtering of the data from each ping. The potential of the proposed method for high-resolution, narrowband, and limited-aspect SAS imaging is demonstrated with simulated and experimental data.