1 June 2023 in International Journal of Electrical and Computer Engineering (IJECE)
The high sunlight intensity in tropical and equatorial regions makes the potential for installing photovoltaic (PV) panels. However, the initial design of PV installations must be analyzed. Their implementation is carried out in buildings with load power for household electricity scale. For this reason, the panel reliability system could be efficient by designing the initial PV requirements using systematic measurements. Collecting data on fluctuating sunlight intensity (unpredictable weather) conditions needs the use of manual measuring tools, namely digital light meters and PV data with sensor integration. The research sample consists of three fluctuating hot weather conditions, namely hot-sunny, hot-cloudy and hot-rainy conditions. These weather conditions were taken because the climate of West Sumatra tends to shift clouds which sometimes cover the sun's rays. The peak PV output for direct current (DC) power generated during hot- sunny conditions reaches 1827.17 W, in sunny-cloudy weather it reaches around 1626.85 W and during sunny-rainy weather conditions the resulting output is 1161.81 W. From daily measurements, the results show that the efficiency of the PV system is strongly influenced by the prevailing weather climate.
1 June 2024 in International Journal of Power Electronics and Drive Systems (IJPEDS)
Stand-alone photovoltaic system or PV is a power generation technology with potential that is environmentally friendly and also one of the solutions for saving high electricity rates today. However, problems that often occur due to weather fluctuations that are always changing, especially North Sumatra, Indonesia result in the conversion produced by solar cells not being optimal. Therefore, it is necessary to do a new model with a dual tracker system and the development of accelerator motor actuators so that the resulting energy conversion is more optimal. The result of optimizing the reliability of the polycrystalline type solar panel which is designed with an additional photovoltaic tracker system to maximize the conversion of solar energy to solar panels is to obtain an output power of 303.72 volts DC and 267.52 volts DC in the position where the tracker is not used. Then the percentage increase in energy reached 29.80%. Dual axis tracker technology is able to maximize energy conversion in improving PV usage performance. The implementation of a stand-alone PV system will be beneficial if the installation is in Indonesian territory, especially in disadvantaged, frontier and outermost areas.