The power generation system with hybrid system grid connected (HSGC) technology is an energy-saving technology that is able to compensate for electricity loads in an energy-efficient manner in today's technological advances. Electrical transient analyzer power (ETAP) simulation software is implemented so that the modeling will have an impact on the development of hybrid systems. Testing the reliability of the system is simulated at the load of school buildings, laboratories, mosques, and kindergarten schools. parameters obtained by evaluating the ratio of the voltage drop before and after the addition of photovoltaic. The value of the voltage drops decreases with the integration of hybrid photovoltaic. The school building panels experienced a voltage drop of 0.15%, reduced after the addition of photovoltaics and wind turbines. Then on the Laboratory panel, a voltage drops of 0.05% was obtained, on the mosque panel the voltage drop reached 0.11%, and on the kindergarten building panel the voltage drop reached 0.09% after the addition of photovoltaic hybrid. From this comparison it can be said that PV and wind turbines can affect the voltage drop and reduce the consumption of electricity loads from the grid caused by adding power from the hybrid photovoltaic hybrid to each load.
1 June 2023 in International Journal of Electrical and Computer Engineering (IJECE)
The high sunlight intensity in tropical and equatorial regions makes the potential for installing photovoltaic (PV) panels. However, the initial design of PV installations must be analyzed. Their implementation is carried out in buildings with load power for household electricity scale. For this reason, the panel reliability system could be efficient by designing the initial PV requirements using systematic measurements. Collecting data on fluctuating sunlight intensity (unpredictable weather) conditions needs the use of manual measuring tools, namely digital light meters and PV data with sensor integration. The research sample consists of three fluctuating hot weather conditions, namely hot-sunny, hot-cloudy and hot-rainy conditions. These weather conditions were taken because the climate of West Sumatra tends to shift clouds which sometimes cover the sun's rays. The peak PV output for direct current (DC) power generated during hot- sunny conditions reaches 1827.17 W, in sunny-cloudy weather it reaches around 1626.85 W and during sunny-rainy weather conditions the resulting output is 1161.81 W. From daily measurements, the results show that the efficiency of the PV system is strongly influenced by the prevailing weather climate.
A smart home is a system that has been programmed and can work automatically by utilizing internet of things (IoT) technology, this system can control various electronic devices in the home. This paper presents a design for developing an IoT-based smart home monitoring system with the addition of security features. This research aims to design and develop a smart home monitoring system that uses the IoT which operates via the web and improves the security aspects of the system. This research includes the development of hardware and software that enables efficient and safe monitoring and control of various aspects of the home via smartphone or computer-based devices using resources from solar power plants. This system relies on the use of a Raspberry Pi as a microcontroller and several sensors. In this context has important value in maintaining user security, and privacy and supports the growing development of the smart home technology industry.
1 August 2024 in Bulletin of Electrical Engineering and Informatics
Electric vehicles charging (EVs) must be done optimally to minimize the impact it causes. EVs are being recognized as a potential way to decrease greenhouse gas emissions and combat climate change. However, there are still difficulties in optimizing these systems to minimize operating costs and EVs charging waiting times. This study investigates several industrial, commercial and residential charging stations. The primary objective of this study is to systematically review the existing literature on optimizing EV charging. The collection of data was centered on scholarly articles released between the years 2018 and 2023 from Scopus, IEEE Xplore. This study presents a systematic literature review of optimizing EVs charging. As a result, 43 EVs charging optimization studies were obtained which were investigated and studied further. Identify and analysis the selected studies, there are two research topics and trends most frequently addressed by researchers: scheduling and coordination. The four most applied methods in EVs charging are identified: particle swarm optimization (PSO), genetic algorithm (GA), linear programming (LP) method, and evolutionary algorithms (EA). Future research directions: develop advanced optimization algorithms, investigating the integration of renewable energy sources into the charging infrastructure, exploring the potential of vehicle-to-grid (V2G) services, studying the impact of EVs charging on the power grid and developing strategies, considering the optimization of charging schedules and coordination strategies for large-scale EVs fleets.
1 January 2024 in Indonesian Journal of Electrical Engineering and Computer Science
Variations in customer demand for active power can impact frequency levels, potentially leading to instability within the electrical power system. To uphold system stability, it becomes essential to control the provision of active power to ensure the frequency remains consistent. This research aims to develop a simulation model for optimizing of the operation of the speed droop governor at the gas turbine cogeneration unit. This research used the quantitative method and descriptive statistical analysis techniques. The simulation model was employed as a simulator for operating the speed droop governor for frequency regulation in the electrical system. The gas turbine cogeneration unit 2 operational data of the speed droop values was used to analyze the influence of the generating unit’s response to changes in frequency. The analysis and simulation results revealed the gas turbine cogeneration unit 2 speed droop value of 4%, which was considered ideal for maintaining the stability of the 60 Hz nominal frequency required by customers.