18 September 2023 in Construction and Building Materials
12 October 2021 in Innovative Infrastructure Solutions
23 June 2022 in Transportation Research Record: Journal of the Transportation Research Board
Rejuvenators are used in the asphalt industry to improve the performance and durability of aged binders and facilitate the use of recycled asphalt materials. The purpose of this study was to evaluate the impact of rejuvenator type and dose on the laboratory performance of asphalt binders. For this study, recycled asphalt pavement (RAP) and extracted RAP binder were obtained from an airfield reconstruction project located in Atlantic City, NJ. One petroleum-based (aromatic extract) and three organic-based (corn oil, tall oil, and modified vegetable oil) rejuvenators were evaluated in this study. Each rejuvenator was used at two different rejuvenator doses (6% and 12% by total RAP binder weight) and was aged at three different levels. Performance grade testing, frequency sweep tests, critical temperature differential (ΔTc ), and Fourier transform infrared spectroscopy (FTIR) tests were conducted. Results showed that the use of rejuvenators lowered the high and low performance grade of extracted RAP binders, in particular organic-based rejuvenators had a greater impact on the performance grade. ΔT c was also improved through the use of rejuvenators. In fact, the extracted RAP binder exceeded the high severity ΔTc threshold (−5°C), whereas the rejuvenated RAP binders improved ΔT c to values greater than the low severity threshold (−2.5°C). Similar findings were observed from the Glover-Rowe parameter as well, in which rejuvenated RAP binders improved the cracking resistance of the extracted RAP binder. When assessing the aging susceptibility, modified vegetable oil and corn oil rejuvenators showed the smallest change in performance between aging levels.
26 March 2022 in Transportation Research Record: Journal of the Transportation Research Board
The purpose of this research is to provide a comprehensive evaluation of the effects of a solid pelletized plastomeric polymer on asphalt mixtures’ properties and performance with respect to different distresses. Five asphalt mixtures—a control mixture (no polymer); asphalt mixtures with 2.5%, 5.0%, and 7.5% polymer content; and a mixture with 5% polymer and lower asphalt binder content—were evaluated. The laboratory testing campaign included complex modulus, direct tension cyclic fatigue, semi-circular bending, disk-shaped compact tension, and asphalt pavement analyzer tests. Advanced performance-based simulation programs—MnPAVETM, FlexPAVETM, and ILLITC—were utilized to predict mixture performance in the context of pavement structure and local traffic and climatic conditions. In addition, four field test sections were constructed for all but the mixture with the reduced binder content and falling weight deflectometer (FWD) testing was conducted on the test sections. Based on the results of laboratory testing and performance simulation it can be concluded that the study modifier significantly improved the rutting performance and slightly improved the mixture fatigue performance. The study modifier did not show a considerable positive or negative effect on the thermal cracking performance. Based on the FWD results, solid polymer is potentially a good option to increase the stiffness of the asphalt concrete (AC) layer.
26 October 2026 in Transportation Research Record: Journal of the Transportation Research Board
This study evaluated the storage stability and performance of composite plastic modified binders at 1-3% dosages using polyethylene grafted maleic anhydride (PE-g-MA) and reactive elastomeric terpolymer (RET) stabilizers. Thermal characterization using differential scanning calorimetry (DSC) showed melting points of 130-155°C, suitable for wet blending. Storage stability was evaluated using complex shear modulus separation index (SI) and fluorescence microscopy (FM). Both stabilizers improved stability up to 2%, but RET achieved more uniform and homogeneous plastic dispersion in asphalt binder matrix. Rheological properties were evaluated through Superpave performance grading (PG), multiple stress creep recovery (MSCR), and linear amplitude sweep (LAS). Composite plastic alone raised the high PG by up to one grade, and RET added a further two grades, producing three grades for HDPE + PP (HP) and two for LDPE + HDPE + PP (LHP), while PE-g-MA had minimal effect on high PG. Both stabilizers maintained base-binder low PG, with RET providing greater improvement. RET significantly improved rutting by enhancing recovery and lowering Jnr, outperforming PE-g-MA. Plastic degraded fatigue performance, but stabilizers mitigated this; RET and PE-g-MA improved fatigue life by approximately 1,500% and 270%, respectively. The RET 2% binder without plastic showed the highest recovery, lowest Jnr, and longest fatigue life among modified binders, indicating RET is the principal performance determinant, while composite plastic provides recycled supplementary high-temperature stiffening within the RET-stabilized matrix. Overall, RET was more effective than PE-g-MA. Thus, composite plastic modified binders with up to 2% dosage with stabilizers can offer better storage stability and performance for sustainable pavement applications.