Broadband and high-efficiency D-band frequency doubler and quadrupler chains in 250-nm indium phosphide (InP) double heterojunction bipolar transistor (DHBT) are presented, together with a design methodology that provides insights into the optimal tradeoff among conversion gain (CG), dc-RF efficiency, and the number of required buffers in the multiplier chain to achieve targeted input and output power levels. Additionally, a frequency doubler is proposed where the optimal load is defined by controlling the input common-mode impedance, allowing the load impedance to approach the matching point without sacrificing output power or efficiency. By relocating matching-related loss from the output matching network to the input common-mode path, the proposed topology enables buffer-less cascading and significantly reduces matching loss. The same technique is extended to a frequency quadrupler chain, enabling a fully buffer-less connection between cascaded impedance-adjusted frequency doublers. Thanks to the proposed doublers, the presented doubler/quadrupler exhibits a measured maximum dc-RF efficiency of 56.5%/29.7%, a peak output power of 8.9/7.4 dBm, and a peak CG of −0.1/−0.5 dB in a compact footprint of 0.24/0.37 mm2.
A D‐band ultra‐low‐power and broadband two‐stage, gain‐boosted low‐noise amplifier (LNA) in a 250‐nm InP DHBT process is presented. The LNA adopts a simultaneous noise and input matching technique, minimizing loss at the input while boosting the gain over a broad frequency range. The gain boosting core uses a feedback network based on a long transmission line between the base and collector and feedback at the emitter to satisfy the gain, stability and bandwidth requirements at once. The LNA achieves 6.2 dB noise figure, 27 dB gain between 130 and 155 GHz while consuming only 2.5 mW DC power.