Piet Wambacq

Prof. Piet Wambacq

orcid

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2021 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
AVAkshay Visweswaran
Akshay Visweswaran
KVKristof Vaesen
Kristof Vaesen
MGMiguel Glassee
Miguel Glassee
AKAnirudh Kankuppe
Anirudh Kankuppe
SSSiddhartha Sinha
Siddhartha Sinha
PWPiet Wambacq
Piet Wambacq
This article presents frequency-modulated-continuous-wave (FMCW) radars developed for the detection of vital signs and gestures using two generations of 145-GHz transceivers (TRXs) integrated in 28-nm bulk CMOS. The performance and limitations of high-frequency radars are quantified with a system-level study, and the design and performance of individual circuit blocks are presented in detail. A 145-GHz center frequency and radar operation over an RF bandwidth of 10 GHz yield a displacement responsivity of 2 π rad/mm and a windowed range resolution of 30 mm, respectively. Radar operation over a 0.1-7 m range is enabled by an effective-isotropic radiated power of 11.5 dBm and a noise figure of 8 dB. The ICs feature frequency multiplication by 9 in the transmit and receive paths, sub-arrayed dipole antennas, and neutralization of TX-RX leakage via delay control. A single TRX dissipates 500 mW from a 0.9-/1.8-V drive. The use of fast chirps (5-30- μs) mitigates the effect of 1/ f-noise at the intermediate frequency (IF). Extensive characterization results showcase state-of-the-art performance of the TRXs, while the code-domain multiple-input and multiple-output (MIMO) radars ( 1 ×4 and 4 ×4) built with them demonstrate vital-sign and gesture detections.

18 January 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
JLJorge Lagos
Jorge Lagos
BHBenjamin Poris Hershberg
Benjamin Poris Hershberg
EMEwout Martens
Ewout Martens
PWPiet Wambacq
Piet Wambacq
JCJan Craninckx
Jan Craninckx
Ring amplification has recently been shown capable of simultaneously achieving high linearity and high bandwidth (BW) in low-voltage, deep nanoscale CMOS processes, while retaining good power efficiency. In these processes, the low but very flat open-loop (OL) gain versus output voltage characteristic of the ring amplifier can be exploited, together with its high BW, to overcome the low intrinsic gain limitations that otherwise mandate the use of power-consuming analog circuits and complex digital calibration. Within this context, this paper introduces the techniques of dead-zone degeneration (DZD) and second-stage bias enhancement to further extend the linearity and speed limits of the ring amplifier, respectively. These techniques are applied to a 12-b, 1-GS/s, single-channel pipelined ADC implemented in a 28-nm planar CMOS process, which achieves 56.6-dB SNDR and 73.1-dB SFDR while consuming 24.8 mW from a single 0.9-V supply, resulting in Schreier and Walden figure-of-merit (FoM) values of 159.6 dB and 45 fJ/conv.-step, respectively.

28 November 2018 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
JLJorge Lagos
Jorge Lagos
BHBenjamin Hershberg
Benjamin Hershberg
EMEwout Martens
Ewout Martens
PWPiet Wambacq
Piet Wambacq
JCJan Craninckx
Jan Craninckx

17 March 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
ZZZhiwei Zong
Zhiwei Zong
XTXinyan Tang
Xinyan Tang
KKKhaled Khalaf
Khaled Khalaf
DYDongyang Yan
Dongyang Yan
GMGiovanni Mangraviti
Giovanni Mangraviti
PWPiet Wambacq
Piet Wambacq
This article presents a series voltage-combining Doherty power amplifier (PA) achieving high output power (Pout) and high power-back-off (PBO) efficiency for 28-GHz fifth-generation (5G) applications. We introduce a new transformer-based series output combiner design method to achieve a true-Doherty load modulation that uses a compact footprint. The output stages of the main PA and the auxiliary PA (aux. PA) both use a differential three-stacked FET topology for high output power without posing a reliability issue. The intermediate-node matching is achieved by using a shunt inductor for voltage waveform alignment and efficiency improvement. A modified differential quadrature hybrid is proposed to achieve the desired quadrature power splitting function without the need for an input balun. For the proof of concept, the proposed PA is implemented in a 22-nm CMOS fully depleted silicon-on-insulator (FD-SOI) technology with a core area of 0.2 mm². At 28 GHz, the measured saturated output power (Psat), 1-dB output compression point (OP1dB), and peak power-added efficiency (PAE) are 22.5 dBm, 21.1 dBm, and 28.5%, respectively. State-of-the-art International Technology Roadmap for Semiconductors (ITRS) figure-of-merit (FOM) and power density are achieved. The measured PAE at 6-dB PBO is 22.1%, which results in an efficiency enhancement ratio of 1.56/3.12 with respect to an ideal class-B and class-A PA. The proposed PA can support 2.4-Gb/s 64-quadratic amplitude modulation (64-QAM) and 0.8-Gb/s 256-QAM signal with a competitive average PAE. Excellent device reliability is validated by operating the implemented PA under 3-dB gain compression point for 12 h with less than 0.06-dB Pout variation. The proposed Doherty PA with a compact footprint is suitable for the integration purpose of future 5G multiple-input multiple-output (MIMO) and phased-array applications.

6 May 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
AKAnirudh Kankuppe
Anirudh Kankuppe
SPSehoon Park
Sehoon Park
PRPratap Tumkur Renukaswamy
Pratap Tumkur Renukaswamy
PWPiet Wambacq
Piet Wambacq
JCJan Craninckx
Jan Craninckx
This article presents an ultralow-power 60-GHz indoor frequency-modulated continuous-wave (FMCW) radar in 28-nm CMOS. The radar front end employs a tunable matching network (TMN), which tracks the chirp frequency and supports a 17% fractional bandwidth, covering unlicensed 60-GHz bands (57-66 GHz). A frequency sixtupler chain (x6) in the transmitter (TX) provides an output power of 8.1 dBm while achieving >20% dc-to-RF efficiency. A mixer-first receiver (RX) front end followed by a source degenerated high-pass (HP) filter suppresses TX-to-RX leakage (spillover) and induces minimal spillover-to-target intermodulation. The RX exhibits a 10.5-dB noise figure (NF) at 60 GHz with only 5.6-mW power consumption, making it suitable for an MIMO array. The radar IC with its DSP platform fully demonstrates its capability in indoor sensing scenarios. The duty-cycling compatible design enabled by the 1- μs radar startup time consumes 62 mW/18 mW in continuous mode/6.25% duty-cycled mode, a record low dc power compared to the state-of-the-art radars in this frequency range.

21 March 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
SPSehoon Park
Sehoon Park
DPDae-Woong Park
Dae-Woong Park
KVKristof Vaesen
Kristof Vaesen
AKAnirudh Kankuppe
Anirudh Kankuppe
SSSiddhartha Sinha
Siddhartha Sinha
JCJan Craninckx
Jan Craninckx
This article presents a 135–155-GHz low-power and high-efficiency frequency multiply-by-9 (x9) frequency-modulated continuous-wave (FMCW) radar transmitter (TX). Starting from a 16-GHz frequency-chirping input signal, cascaded frequency triplers at $V$ -band (40–75 GHz) and $D$ -band (110–170 GHz) bring the signal to the $D$ -band, subsequently amplified and radiated via a power amplifier (PA) and an on-chip antenna at $D$ -band. The $D$ -band PA with a reduced gain of transistors at $f_{\max }$ /2 proposes a broadband gain-boosting technique, achieving a maximum achievable gain ( $G_{\max }$ ) for broad frequency range with high-order embedding passives. The x9 chain proposes phase-controlled frequency triplers that align the phase of each harmonic contribution and boost the third harmonic output power, conversion gain, and dc-to-RF efficiency. Implemented in a 28-nm CMOS process, the TX achieves a measured effective isotropic radiated power (EIRP) of 9.4 dBm, a dc-EIRP efficiency of 16.6% while exhibiting an antenna gain de-embedded output power of 7.1 dBm, and a dc-to-RF efficiency of 9.7% with less than 77-mW dc power consumption.