11 December 2018 in Multifunctional Materials
A recent development in bioelectronic devices involves the utilization of multifunctional polymers as substrate material. Dynamically softening, thin-film polymers reduce the mechanical mismatch between device and tissue after implantation and therefore improves the device–tissue interaction. However, when implementing a new material into the fabrication of fully functional and chronically viable devices, there are specific challenges that need to be addressed. The key for all multimaterial devices is to ensure a good adhesion and connectivity between the different layers. That is especially true if one of the materials is sensitive to stimuli such as temperature and moisture. This review will give an overview on the development of a variety of neural interfaces for recording and stimulation with softening shape memory polymers (SMPs) as substrate material. This review discusses specific requirements for device fabrication, testing, and durability.
11 July 2018 in Semiconductor Science and Technology
The effect of annealing atmosphere on indium-gallium-zinc-oxide (IGZO) thin film transistors (TFTs) fabricated on a deformable softening polymer substrate is presented in this work. Different annealing conditions—ambient, oxygen, vacuum and forming gas—are employed in the fabrication of IGZO TFTs and the changes in electrical characteristics are examined. Fabricated devices exhibit shape memory properties due to thiol-ene/acrylate substrates allowing the softening of bioelectronics to demonstrate modulus changes in aqueous conditions at body temperature. Gold (Au) is used as the contact metal for the gate, drain and source for its good adherence and malleability required for this polymer. It is found that annealing treatments at 250 °C can improve the field effect mobility of the TFTs from 10-2 up to 30 cm2/V-s. These improvements are attributed to the reduction of oxygen concentration in the active film of the TFTs. The contact resistance is also reduced by the annealing treatments from approximately 1 MΩ to 20 kΩ, indicating improvement in physical contact at the IGZO-Au interface. In addition, the contributions of contact resistance and channel resistance to other electrical parameters are analyzed. This study will pave the way for the development and optimization of high-performance bioelectronic devices on smart polymers.