In this paper, we present an approach to fatigue estimation of a Main Landing Gear (MLG) attachment frame due to vertical landing forces based on Operational Loads Monitoring (OLM) system records. In particular, the impact of different phases of landing and on ground operations and fatigue wear of the MLG frame is analyzed. The main functionality of the developed OLM system is the individual assessment of fatigue of the main landing gear node structure for Su-22UM3K aircraft due to standard and Touch-And-Go (T&G) landings. Furthermore, the system allows for assessment of stress cumulation in the main landing gear node structure during touchdown and allows for detection of hard landings. Determination of selected stages of flight, classification of different types of load cycles of the structure recorded by strain gauge sensors during standard full stop landings and taxiing are also implemented in the developed system. Based on those capabilities, it is possible to monitor and compare equivalents of landing fatigue wear between airplanes and landing fatigue wear across all flights of a given airplane, which can be incorporated into fleet management paradigms for the purpose of optimal maintenance of aircraft. In this article, a detailed description of the system and algorithms used for landing gear node fatigue assessment is provided, and the results obtained during the 3-year period of system operation for the fleet of six aircraft are delivered and discussed.
The Su-22 fighter-bomber is a military aircraft used in the Polish Air Force (PLAF) since the mid 1980’s. By decision of the Ministry of National Defence Republic of Poland, the assumed service life for this type of aircraft was prolonged up to 3200 flight hours based on the Full Scale Fatigue Test (FSFT) results. The FSFT was conducted using the real load profile defined during the Operational Load Monitoring Program (OLM) and the 3200 hour service life was also based on this load profile.In order to assure safe operation of all the 18 Su-22 aircraft, the Individual Aircraft Tracking program was introduced. The program was based on the results of the FSFT as well as the analysis of the flight parameters recorded by the THETYS onboard flight recorder.In this paper, the authors present the methodology, assumed fatigue hypothesis and preliminary results of the IAT program for the Polish Su-22.
The Su-22 fighter-bomber is a military aircraft used in the Polish Air Force since the mid 1980’s. By the decision of the Polish Ministry of Defense the predicted service life for this type of aircraft will be extended to 3200 flight hours. Due to the fact that some aircraft were nearing the end of the service life guaranteed by the manufacturer, the actual service life, determined based on the flight profile in the Polish Air Force, had to be validated. Consequently, the Full Scale Fatigue Test (FSFT) had to be carried out in order to verify that the required service life was attainable. This article describes the process of preparation of the load spectra used in the Su-22 FSFT. Due to the fact that the Su-22 has a variable sweep wing the whole test was divided into three Stages (landing, flight and flap loads) carried out at different wing sweep angles (30°/45°/30°). The spectra were developed using the historical data gathered from Flight Data Recorders (FDR), strain signals acquired during the Operational Load Monitoring program (OLM) and aerodynamic calculations.
The following article describes the Full Scale Fatigue Test of the Su-22 UM3K fighter-bomber. The test was carried out due to the decision of the Polish Ministry of Defense to prolong the service life for this type of aircraft. Within the article authors present the main goals of the test as well as main assumptions and simplifications which had to be done due to time and cost limitations. Furthermore the preparation and progress of each stage is described. Final section includes selected results and final remarks.
This paper presents a general concept of the Full Scale Fatigue Test of the Mi-24 helicopter including the test layout and load distribution, as well as describes the milestones to be achieved. Additionally, some initial work conducted in order to determine both the mass and load distribution in the structure is described. The main goal of the test is to verify the low cycle fatigue life of the helicopter structure (fuselage, tail boom, wings and landing gear). The test will be divided into two main stages at which flight and landing loads will be applied. The authors demonstrate the general test concept, the helicopter’s structure fixture and the arrangement of the hydraulic actuators at both stages in order to achieve representative loads during the test. The proposed concept is based on AFIT’s previous experience in full scale structural testing, available literature and the experience of the test staff.