13 July 2011 in Applied Optics
A tridirectional large lateral shearing displacement interferometric system has been proposed and used to reconstruct the temperature field of a quasi-axisymmetric diffused ethylene flame in two-dimensional (2D) and three-dimensional (3D) hypotheses. In comparison with the thermocouple results, the 2D reconstructed results affords a quantitative analysis with an average discrepancy between 20 and in the full field, except in the closer part inside the peak temperature location where a high soot volume fraction exists. The 3D reconstructed results affords qualitative analysis and exhibits some asymmetrical characters, but an obvious error occurs at height where it is not suitable to use the universal correction coefficient.
1 April 2024 in Journal of Thermophysics and Heat Transfer
22 March 2024 in Heat Transfer
23 September 2018 in Heat Transfer
1 October 2025 in Journal of Thermophysics and Heat Transfer
The failure proportion of insulated gate bipolar transistor (IGBT) owing to overheating is very high during operation; especially, it endures large transient currents when turned on. Therefore, the efficient thermal management of IGBT power devices is very important to the safety and reliability of the IGBT. Here, a finite element analysis is carried out to investigate the influence of a thermal interface material with paraffin as the phase change material and graphene as reinforced thermal conductive filler on the temperature and thermal resistance of IGBT modules. The simulation results show that the existence of paraffin phase change material can slow down the heating rate and decrease the interfacial thermal resistance of the IGBT module. At the optimal thickness of paraffin, [ ], the temperature of IGBT module is dropped by 13°C. The temperature of IGBT module is lowest for 5% wt mass fraction of graphene, and decreases by 6°C compared to that of 0% wt mass fraction of graphene. The composite thermal interface material can effectively enhance the heat dissipation of IGBT modules compared with commercial silicone grease. All the results demonstrate that the composite thermal interface material is very useful in heat dissipation practical applications for IGBT modules.