A hypervapotron (HV) loop test facility was built to conduct some experiments of heat transfer. Phenomena of HV were observed using the techniques of planar laser-induced fluorescence, high-speed photography, and particle image velocimetry. According to the design of the ITER cooling water system, the fluid flow and condition parameters were utilized: 1) CuCrZr alloy material; 2) triangular and rectangular fin structures; 3) inlet subcooling temperature of 298 K; and 4) rhodamine B solution flow velocity of 0.3-0.5 m/s. It was found that the heat transfer coefficient of the rectangular fin was 1.3-1.5 times higher than that of the triangular fin under the same test conditions. Furthermore, the preliminary mechanism of the heat transfer was explained by the coupling effect of the vortex flow with vapor bubble in the fin pitch, and the heat transfer efficiency was extraordinarily dependent on maintaining the time of vortex formation between the fins.
5 February 2018 in IEEE Transactions on Plasma Science
The accelerator-driven subcritical system (ADS) has potential economy and safety and relatively mature technology base, which has been chosen as a priority development advanced nuclear system. Liquid lead bismuth eutectic (LBE) is selected as the spallation target material and core coolant. The reduced activation ferritic/martensitic (RAFM) steel and the silicon carbide composite (SiC f ) are selected as its structural material and functional material, respectively. In the present experimental investigation, the special vacuum experimental device has been built, and the “dispensed droplet” modification of the classic sessile droplet technique has been used to investigate the wetting property and interfacial interactions for LBE/RAFM steel, LBE/316L, LBE/SiC, and LBE/SiCf couples. The contact angles were measured between the liquid LBE and the various candidate materials under working temperature from 300 °C to 480 °C. The results could provide meaningful compatibility database of liquid LBE and valuable engineering design reference of candidate structural materials and functional material for future ADS.