17 May 2019 in Energy Technology
29 March 2021 in Energy Technology
In this work, a detailed study of the drying of battery electrodes of different thicknesses is presented. A mathematical model to calculate the solvent loading and film temperature over the drying time is experimentally validated. The model is based on a first study presenting a simulation model to predict the drying course when linear drying kinetics prevail and no resistance exists for solvent transport within the film. To shed some light on the drying behavior of electrode films with different thicknesses, the start of capillary pore emptying is observed using a digital microscope. In the experiments, an onset of capillary transport even before the end of film shrinkage is observed for the electrode films with thicknesses above state‐of‐the‐art‐thickness. A clusterwise drying behavior becomes more distinct for thicker electrodes, with large areas of dry and wet capillaries next to each other, compared to a more homogenous drying of the thin electrodes. Based on these findings, the linear model is extended to consider transport limitations within the porous electrode film in the form of a moving drying front. The experiments show an increasing deviation from the linear model with increasing electrode thickness and the extended simulation, which considers transport resistances within the film, shows good agreement.
2 May 2022 in Drying Technology
Since the loading of electrodes for Li-ion batteries with an excessive amount of moisture affects the performance of the cells, the moisture is partly removed in a post-drying process step. The drying time is thereby controlled by the amount of moisture that has to be removed as well as the mass transport kinetics of water. This mass transport kinetics is limited by various mass transport resistances, which in turn can be influenced by individual dryer settings. In this paper, we investigate water-based anodes for Li-ion batteries as well as selected materials, and distinguish between different possible mass transport resistances that affect the drying time. Determined diffusion coefficients can be used in future modeling of the post-drying process. Special consideration needs to be bestowed upon the mass transport of water in the polymeric binders, since earlier investigations revealed that the moisture uptake of the anodes is particularly caused by sodium carboxymethyl cellulose (Na-CMC). This high water uptake by the binder in water-based electrodes leads to a polymer film drying process within the porous structure of the electrode. The diffusion of water in layers of binder is particularly dependent on the concentration as well as the temperature of the binder.
9 February 2023 in Langmuir