Nandish Mehta

Nandish Mehta

Auto-generated profile, based on publicly available information

Nandish Mehta

Department of Electrical Engineering and Computer Science, University of California at Berkeley, Berkeley, CA 94720 USA

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 January 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
NMNandish Mehta
Nandish Mehta
SLSen Lin
Sen Lin
BYBozhi Yin
Bozhi Yin
SMSajjad Moazeni
Sajjad Moazeni
VSVladimir Stojanovic
Vladimir Stojanovic
For the silicon photonic links to meet the target bit error rate (BER), the laser source must output enough optical power to overcome the optical channel loss and limited receiver sensitivity. Combined with poor wall-plug efficiency, this optical power requirement makes the electrical power consumed by the laser source a significant portion of the link energy cost. This article proposes a laser-forwarded coherent link that greatly reduces the required laser optical power by averaging optical path loss between the main and forwarded paths and by improving the receiver sensitivity using a homodyne coherent detector. The link performance analysis reveals that the laser forwarded link improves the laser power budget by ≈6-8 dB compared with a conventional intensity-modulation/direct detection link using typical photonic link components. To demonstrate the laser forwarded link, a microring resonator phase modulator, a balanced detector, and a 3-dB coupler are integrated with CMOS circuits in a GFUS 45-nm SOI process. The transmit driver and the receiver consume 40 and 450 fJ/bit, respectively. Aided by ≈8-dB boost from laser forwarding and the coherent detection gain, the receiver achieves -15.6-dBm optical modulation amplitude sensitivity. The link operates at 10 Gb/s with BER <10⁻⁹ and electrical energy efficiency of 2.3 pJ/bit.

23 June 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
NMNandish Mehta
Nandish Mehta
STStephen G. Tell
Stephen G. Tell
WTWalker J. Turner
Walker J. Turner
LTLamar Tatro
Lamar Tatro
JGJih-Ren Goh
Jih-Ren Goh
CGC. Thomas Gray
C. Thomas Gray
Availability of a reliable ON-chip oscillator can secure a system-on-chip (SoC) against physical clock attacks by enabling applications such as boot-up using ON-chip oscillator and hardware clock monitors. This article proposes a frequency-error feedback (FEF) loop-based relaxation oscillator for such applications. It suppresses the low-frequency noise and improves the time interval error (TIE) without degrading the period jitter. It also stabilizes the oscillator against supply and temperature variations. A 77-MHz oscillator prototype is fabricated in a commercial 5-nm FinFET process. Operating from 0.9-V digital and 1.2-V analog supplies, the prototype consumes a total of 0.84 mW and occupies an area of 0.0152 mm2. It achieves a TIE of 3 ns over 10 K cycles which is 3 $\times$ better than an oscillator without an FEF loop. Chip samples are picked from four wafer split lots. The worst case frequency variation measured from 16 samples is $\pm0.25\%$ across an analog supply change of 1.1–1.35 V, while a variation of $\pm 0.3\%$ is measured over $-$ 40 to 125 $^\circ$ C temperature from eight samples.

27 October 2020 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
JWJohn Charles Wright
John Charles Wright
CSColin Schmidt
Colin Schmidt
BKBen Keller
Ben Keller
DDDaniel Palmer Dabbelt
Daniel Palmer Dabbelt
JKJaehwa Kwak
Jaehwa Kwak
BNBorivoje Nikolic
Borivoje Nikolic
This work demonstrates a dual-core RISC-V system-on-chip (SoC) with integrated fine-grain power management. The 28-nm fully depleted silicon-on-insulator (FD-SOI) SoC integrates switched-capacitor voltage converters and 4 Gb/s off-chip serial links. The SoC runs applications with operating system support on dual RISC-V Rocket cores with vector accelerators. Runtime monitoring of microarchitectural counters allows prediction of future compute intensity, enabling the voltage state of the managed core to be adjusted quickly to optimize energy efficiency without sacrificing overall performance.

3 January 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
NMNandish Mehta
Nandish Mehta
JHJohan H. Huijsing
Johan H. Huijsing
VSVladimir Stojanovic
Vladimir Stojanovic
A low-power class-AB amplifier for high-fidelity headphones is presented. The linearity of a class-AB amplifier strongly depends on the loop gain over the audio band and voltage swing. In this paper, a cascode-driven mesh technique limits the number of high-swing nodes in the output stage, thereby preserving the loop gain of the preceding gain stages. A frequency compensation scheme is proposed that extends the unity-gain bandwidth (UGB) and increases the loop gain at 20 kHz. Combining these two techniques, the amplifier achieves -101.4-dB total harmonic distortion plus noise (THD+N) over the full audio band, the lowest ever reported nonlinearity among sub-milliwatt CMOS class-AB amplifiers. The amplifier delivers 51.2-mW peak power to a 16ΩII0.33-nF load while consuming 0.97 mW of total static power. It has UGB of 12.3 MHz and SNR of 108 dB. These results are consistent when measured over eight test chips. Compared to the recent prior art, the amplifier exhibits >12 dB better linearity and >14-dB dynamic range. This results in 2.5x improvement in figure of merit (FOM = Peak Load Power/(Quiescent Power x THD+N[%])). It occupies 0.16 mm2 in a standard 65-nm CMOS.

7 June 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
NMNandish Mehta
Nandish Mehta
CSChen Sun
Chen Sun
MWMark Wade
Mark Wade
VSVladimir Stojanovic
Vladimir Stojanovic
This paper presents a high-sensitivity, fully differential (FD) optical receiver (RX) for high-density system-on-chip applications. The high digital activity prominent in such applications creates common-mode and power-supply noise, which degrades the optical RX sensitivity. To suppress these noise sources and enhance the RX sensitivity, an optical RX is proposed that realizes FD operation by using a new resonant split-microring photodetector. The complete RX is implemented in a 45-nm SOI CMOS with no process changes. When aptly biased, the detector outputs FD photocurrent with <±0.3% splitting error. It has 0.52-A/W responsivity and a bandwidth of 5.0 GHz. The RX circuit is optimized to achieve BER < 10⁻¹² at 12 Gb/s with an optical modulation amplitude (OMA) sensitivity of -18.2 dBm while consuming 7 mW. Compared with a conventional single-ended RX on the same test-chip, the proposed RX improves sensitivity from 13 to 7.9 μApp without reducing the bandwidth or significantly impacting the RX energy efficiency.

1 September 2016
Verified
Conference Paper
Closed access
NMNandish Mehta
Nandish Mehta
CSChen Sun
Chen Sun
MWMark Wade
Mark Wade
SLSen Lin
Sen Lin
MPMilos Popovic
Milos Popovic
VSVladimir Stojanovic
Vladimir Stojanovic
A high-sensitivity, fully-differential optical receiver for high-density photonic interconnects is presented. To realize fully-differential operation, a 3-dB power splitter and SiGe photodetector are integrated with the receiver, all in a CMOS 45nm SOI process. The proposed receiver improves sensitivity by suppressing common-mode and supply noise through fully-differential (FD) operation, achieving 12Gb/s at BER <;10 -12 with input sensitivity of 8.6μA PP while consuming 4.3mW. To understand the effectiveness of the proposed solution, we compare it to a conventional single-ended (SE) receiver on the same test-chip. Measured sensitivity is >2× better than the closest state-of-the-art design, achieving same energy per bit at higher data-rate.