30 January 2020 in IEEE Journal of Solid-State Circuits
For the silicon photonic links to meet the target bit error rate (BER), the laser source must output enough optical power to overcome the optical channel loss and limited receiver sensitivity. Combined with poor wall-plug efficiency, this optical power requirement makes the electrical power consumed by the laser source a significant portion of the link energy cost. This article proposes a laser-forwarded coherent link that greatly reduces the required laser optical power by averaging optical path loss between the main and forwarded paths and by improving the receiver sensitivity using a homodyne coherent detector. The link performance analysis reveals that the laser forwarded link improves the laser power budget by ≈6-8 dB compared with a conventional intensity-modulation/direct detection link using typical photonic link components. To demonstrate the laser forwarded link, a microring resonator phase modulator, a balanced detector, and a 3-dB coupler are integrated with CMOS circuits in a GFUS 45-nm SOI process. The transmit driver and the receiver consume 40 and 450 fJ/bit, respectively. Aided by ≈8-dB boost from laser forwarding and the coherent detection gain, the receiver achieves -15.6-dBm optical modulation amplitude sensitivity. The link operates at 10 Gb/s with BER <10⁻⁹ and electrical energy efficiency of 2.3 pJ/bit.
29 January 2020 in IEEE Journal of Solid-State Circuits
A 50-Gb/s four-level pulse-amplitude modulation (PAM4) silicon photonic transmitter is presented, which is composed of a 40-nm bulk CMOS driver hybrid integrated with a 180-nm silicon-on-insulator (SOI) CMOS Mach-Zehnder modulator (MZM). To recover and demodulate 50-Gb/s PAM4 data into dual-25-Gb/s nonreturn to zero (NRZ) streams for the co-designed MZM digital-analog converter (DAC), a reference-less clock and data recovery (CDR) is integrated, and to achieve high swing and high speed, the driver is made in a distributed amplifier (DA), employing push-pull cells that are grouped in three segments. A digital-assisted distributed driver (DADD) that replaces the input T-line by segmented 2:1 multiplexers and buffers is, thus, proposed. Precise time gating in each segment allows for velocity match in both the DA and optical DAC, as well as the in-segment pre-emphasis without power-hungry analog delay stages. Measurement results show that the driver and CDR achieve 4-VPP differential swing, 1.19-ps rms jitter, and 1.34-W power consumption at 50 Gb/s. An optical transmitter is demonstrated by wire-bonding the driver to the MZM DAC, achieving 50-Gb/s PAM4 output with 6.35-ps rms jitter and improved linearity.
2 January 2026 in Nature Electronics
29 April 2024 in IEEE Transactions on Electron Devices
Characteristics of transistors from two commercial monolithic silicon-photonic processes are evaluated for the first time down to 2.5 K cryogenic temperatures. dc characterization is implemented on different types of devices. Key design parameters are extracted and analyzed with the corresponding low-temperature effects, including the increase in both threshold voltage and carrier mobility, the decrease of subthreshold swing (SS), and the severe kink effect in floating-body (FB) devices. The characterization of ring oscillators (ROs) shows the average gate delay improves by approximately 21%. The random telegraph noise (RTN) is measured and analyzed in both time and frequency domains, showing that the band tail states are likely the source of the extra noise at deep cryogenic temperature, leading to the increase of corner frequency by $10\times $ in the overall noise power spectral density (PSD).