We report a magnetically-anisotropic PrCo5 permanent bulk magnet, prepared by a hot deformation method, with crystallographic orientation-dependent magnetic properties. Although the PrCo5 crystals strongly favor the {0001} orientation texture, the crystallographic orientation textures of PrCo5 crystallites differ at various radial locations. From the bulk center to the edge, the c-axis orientation texture decreases from 5.4 MRD to 4.1 MRD, whereas the remanence decreases from 8.93 kGs to 7.58 kGs and the coercivity increases from 4.34 kOe to 6.56 kOe. This paper also reports the alteration of boundary plane orientation textures, resulting from the corresponding energy anisotropy at different locations, and suggests that the development of grain boundaries with lower boundary energies has a significant impact on the magnetic properties with regard to remanence and energy density. The current work therefore proposes an elegant approach to attain desired magnetic properties in PrCo5 magnets by fine-tuning the crystallographic orientation.
1 May 2014 in International Journal of Refractory Metals and Hard Materials
Misorientation angle statistics for the specimen, with a red line for Nd 2 Fe 14 B/Nd 2 Fe 14 B grain boundaries, blue line for Nd 2 Fe 14 B/Nd-Rich phase boundaries, and black line for the randomly oriented case.
Autogenous laser welding of 5A90 Al–Li alloy sheets in a butt-joint configuration was carried out in this study. The microstructure characteristics of the weld metal and base metal in the horizontal surface and the transverse section of the welded joints were examined quantitatively using electron back scattered diffraction (EBSD) technique. The results show that the weld metal in the horizontal surface and the transverse section exhibits similar grain structural features including the grain orientations, grain shapes, and grain sizes, whereas distinct differences in the texture intensity and misorientation distributions are observed. However, the base metal in the horizontal surface and the transverse section of the joints reveals the obvious different texture characteristics in terms of the grain orientation, grain morphology, predominate texture ingredients, distribution intensities of textures, and grain boundary misorientation distribution, resulting in the diversity of the microhardness in the base metal and the softening of the weld metal. However, the degree of the drop in the hardness of the weld metal is highly correlated to the microtexture developed in the base metal.