4 March 2015 in Space Weather
Geomagnetically induced currents (GIC) are a result of time variations of the geomagnetic field, which induce a geoelectric field at the Earth's surface. Geomagnetic perturbations are enhanced during adverse space weather events called geomagnetic storms. All ground-based conductor networks can be affected by GIC during such events. As a way of assessing the magnitude of GIC expected in a particular technological system, models are developed, in which the computation of the induced geoelectric field is a key step. Computation of GIC in the South African power transmission network has so far been done using a uniform Earth model and improved using a layered Earth conductivity profile. In this work we present geoelectric field results obtained by using the finite element method (FEM) and improved GIC estimates using a realistic conductivity profile, magnetic field data interpolated from two South African observatories, and a new method for estimating the network coefficients, a and b, which map the north-south and east-west electric fields to their respective GIC components. The performance of the chosen FEM model demonstrates that it is an effective tool for GIC modeling. Unlike previous engineering techniques, our method for estimating the a and b coefficients from GIC and measured magnetic field data gives results that are independent of prior knowledge of the network configuration. The GIC estimated using the a and b coefficients obtained from the proposed method compares well with the measured GIC during the late October 2003 geomagnetic storm.
29 February 2016 in Space Weather
Geomagnetically induced currents (GICs) in conductors connected to the Earth are driven by an electric field produced by a time‐varying magnetic field linked to magnetospheric‐ionospheric current perturbations during geomagnetic storms. The GIC measurements are traditionally done on the neutral‐to‐ground connections of power transformers. A method of inferring the characteristics of GIC in power lines using differential magnetic field measurements is presented. Measurements of the GIC in the power lines connected to a particular power transformer are valuable in the verification of the modeling of GIC in the power transmission network. The differential magnetometer method (DMM) is an indirect method used to estimate the GIC in a power line. With the DMM, low‐frequency GIC in the power line is estimated from the difference between magnetic field recordings made directly underneath the power line and at some distance away, where the magnetic field of the GIC in the transmission line has negligible effect. Results of the first application of the DMM to two selected sites of the Southern African power transmission network are presented. The results show that good quality GIC measurements are achieved through the DMM using Commercially‐Off‐The‐Shelf magnetometers.
9 October 2009 in Journal of Engineering, Design and Technology
BMBokang Patrick Motjolopane
Bokang Patrick Motjolopane
Purpose – Distributed wireless sensor networks (DWSNs) are applied in a variety of applications that can enhance the quality of human life. Batteries are the predominant source of energy in DWSNs. One of the key obstacles in the adoption of DWSNs technology is the limited lifetime of batteries in microsensors. Recharging or replacing depleted batteries can significantly increase costs in DWSNs. The purpose of this paper is to address, through a thorough review, this power challenge in DWSNs and to evaluate a 16-element equiangular spiral rectenna to harvest ambient microwave energy in real-life scenarios to supply indoor DWSNs. Design/methodology/approach – The paper focuses on the practical implementation of a rectenna that can be used in electromagnetic energy harvesting. The design and measurement of the rectenna follows a broad overview of rectenna designs reported in the literature. Findings – The paper concludes that the 16-element equiangular spiral rectenna has the potential to generate power that enables long periods of operation of the DWSNs without human intervention in the power management process, thus reducing maintenance and administration costs. Originality/value – Research into electromagnetic power harvesting is very limited in the South African context. The paper presents a concise overview of existing power harvesting techniques that will benefit novice researchers in the field of electromagnetic energy harvesting. It concludes with the performance characterisation of a spiral array rectenna.
1 October 2015 in Thin Solid Films