This paper presents a linear-mode optical sensor for the feasible applications of unmanned vehicle LiDAR systems, in which a pulsed-erbium fiber laser is exploited as a light source and a 16-channel transimpedance amplifier (TIA) array is utilized in an optical Rx module with low-cost InGaAs PIN photodiodes. In particular, a voltage-mode CMOS feedforward (VCF-TIA) is newly proposed to achieve twice higher transimpedance gain with lower noise and similar bandwidth characteristics than a conventional inverter TIA, thereby enabling longer detection. Test chips of the 16-channel VCF-TIA array realized in a standard 0.18-μm CMOS process demonstrate 76.3-dBΩ transimpedance gain, 6.3-pA/sqrt(Hz) average noise current spectral density, less than -33-dB crosstalk between channels, and 29.8-mW power dissipation per channel from a single 1.8-V supply. Automatic gain control is also equipped to extend input dynamic range for near-range detection. Hence, the proposed linear-mode optical sensor clearly detects the reflected optical pulses from the target of 5% reflection rate within the range of 0.5-25 m.
Research into optical spiking neural networks (SNNs) has primarily focused on spiking devices, networks of excitable lasers or numerical modeling of large architectures, often overlooking key constraints such as limited optical power, crosstalk and footprint. We introduce SEPhIA, a photonic-electronic, multi-tiled SNN architecture emphasizing implementation feasibility and realistic scaling. SEPhIA leverages microring modulators (MRMs) and multi-wavelength sources to achieve effective $$ < 1$$ laser-per-spiking neuron ratio. We validate SEPhIA at both device and architecture levels by time‑domain co‑simulating excitable CMOS‑MRM coupled circuits and by devising a physics‑aware, trainable optoelectronic SNN model, with both approaches utilizing experimentally derived device parameters. The multi-layer optoelectronic SNN achieves classification accuracies over 90% on a four-class spike-encoded dataset, closely comparable to software models. A design space study further quantifies how photonic device parameters impact SNN performance under constrained signal-to-noise conditions. SEPhIA offers a scalable, expressive, physically grounded solution for neuromorphic photonic computing, capable of addressing spike-encoded tasks.