In this paper, we report the excitation of coherent density and potential fluctuations induced by magnetohydrodynamic (MHD) activity in the edge plasma region of ADITYA-U tokamak. When the amplitude of the MHD mode, mainly the m/n = 2/1, increases beyond a threshold value, |B̃θ|/Bθ ∼ 0.3%–0.4%, coherent oscillations in the density and potential fluctuations are observed having the same frequency as that of the MHD mode. The mode numbers of these MHD induced density and potential fluctuations are obtained by Langmuir probes placed at different radial, poloidal, and toroidal locations in the edge plasma region. Detailed analyses of these Langmuir probe measurements reveal that the coherent mode in edge potential fluctuation has a mode structure of m/n = 2/1, whereas the edge density fluctuation has an m/n = 1/1 structure. It is further observed that beyond the threshold, the coupled power fraction scales almost linearly with the magnitude of B̃θ/Bθ fluctuations. Furthermore, the rise rates of the coupled power fraction for coherent modes in density and potential fluctuations are also found to be dependent on the growth rate of magnetic fluctuations. The disparate mode structures of the excited modes in density and plasma potential fluctuations suggest that the underlying mechanism for their existence is the coupling of even harmonics of potential to the odd harmonics of pressure due to 1/R dependence of the toroidal magnetic field.
This article reports the development of a versatile high-speed reciprocating drive system (HRDS) with interchangeable probe heads to characterize the edge plasma region of the ADITYA-U tokamak. The system is driven by a servo motor, which is controlled by a PXI-commanded controller. It can be operated remotely with precise control over the speed, acceleration, and distance traveled by the probe head on a shot-to-shot basis. HRDS-driven linear array of Langmuir probe measurements of floating potential, electron density, and temperature revealed that the gas puff impacts these parameters up to ∼3 to 4 cm inside the last closed flux surface (LCFS). In addition, by driving an array of magnetic probes, the system facilitated measurements of magnetic fluctuations inside the LCFS, demonstrating its versatility in supporting different diagnostic probes.
Application of periodic short bursts of gas leads to periodic separation of the plasma column edge from the limiter in the Ohmically heated discharges of ADITYA-U tokamak. After every gas-puff, injecting around 1017–1018 m−3 molecules of fuel gas in the edge of the plasma column, a significant reduction in plasma density, temperature, Hα emission intensity and an increase in the Hβ/Hα ratio is observed in the vicinity of the limiter radius for a certain time duration before these parameters regain their pre-gas puff values. A decline in the ion-flux to the limiter is also observed simultaneously. The global confinement of plasma also increases after each gas-puff. These observations, which repeat after each gas-injection, imply that the plasma–neutral interaction occurs further away from the limiters after the gas-injection and indicate a periodic plasma separation from the limiter surface. Further investigation revealed that the gas-injection modifies the radial and toroidal electric field, which may be playing a role in the separation of the plasma column from the limiter surface. It was further demonstrated by an electrode bias experiment in the absence of gas-injection that an application of an external radial electric field can result in obtaining a separated plasma state.
This study examines density buildup during the plasma formation and burnthrough phases of Ohmic discharges in the Aditya-U tokamak by analyzing density measurements from a 140 GHz real-time heterodyne microwave interferometer. It has been observed that only a small percentage of gas (∼1%–4%) is ionized during the avalanche phase. Furthermore, statistically analyzing several tens of discharges, it has been revealed that the central chord-averaged density and the corresponding ionization fraction during the avalanche phase remain independent of E/Pfill, where E is the externally applied toroidal electric field and Pfill is the prefill pressure in the range of ∼1.7–2.5 × 10−4 Torr. Further density buildup occurs in the burnthrough phase, i.e., after the roll-over of the neutral hydrogen emission (Hα peak), which is highly influenced by the prevailing plasma conditions. This indicates that turbulent magnetic fields significantly influence the ionization after the avalanche process stops and plasma forms during the initial burnthrough phase. Electron motion becomes turbulent in turbulent magnetic fields, which seem to facilitate ionization.