Emerging applications in cloud computing, optical communication and interconnects,1 – 4 internet of things (IoT) integrated communication networks,5,6 lidar-assisted applications, such as autonomous vehicles,7 security, surveillance, artificial intelligence,8,9 and low-light-enabled imaging applications in life sciences10 – 12 can be made economical and versatile by designing complementary metal-oxide-semiconductor (CMOS)-compatible or silicon (Si)-compatible photonic systems. However, as an indirect bandgap material, Si inherently exhibits a weaker absorption coefficient in comparison to group III-V compound semiconductors.13,14 The absorption in Si shows a dramatic reduction in the near-infrared (NIR) wavelength spectrum—a wavelength spectrum range essential to plenty of the aforementioned optoelectronic applications. Owing to its weak absorption, Si-based photonic devices demand a thick substrate layer to fully utilize the illuminated optical stimuli, e.g., for 95% photon absorption of 850 nm wavelength, a thick Si layer is required.15 Despite an enhanced absorption in such a thick Si absorption layer, a long transit time of the generated electron–hole pair and its inherent low carrier mobilities result in only sub-par photodetectors that do not comply with the performance requirements of emerging photonic systems. In contrast with Si, the most commonly used III-V compounds, such as GaAs and InP, exhibit and higher absorption, respectively, at a wavelength of 850 nm.13 GaAs shows absorption of 850 nm incident wavelength in merely a thick layer. Attributing to its higher absorption coefficient and exceptionally high carrier mobilities,16 GaAs-based photodetectors exceed the performance expectations for the current and emerging optoelectronic systems. Such exceptional performance helps the GaAs, and their alloys thrive as the mainstream materials for numerous emerging photonic applications. However, a CMOS incompatibility in the fabrication process of such devices calls for a tedious and costly hybrid integration with CMOS electronics. Recently, despite its sub-par performance, foundries have introduced Si-based optoelectronic integrated circuits in the CMOS infrastructure17,18 as a trade-off between performance and the manufacturing/integration cost. Therefore, innovative techniques to enhance light–matter interaction are crucial to designing photodetectors with diminishingly thin Si films used in modern CMOS processes.