14 March 2024 in IEEE Transactions on Communications
Drawing inspiration from the advantages of intelligent reflecting surfaces (IRS) in wireless networks, this paper presents a novel design for intelligent omni surface (IOS) enabled integrated sensing and communications (ISAC). By harnessing the power of multi-antennas and a multitude of elements, the dual-function base station (BS) and IOS collaborate to realize joint active and passive beamforming, enabling seamless 360-degree ISAC coverage. The objective is to maximize the minimum signal-to-interference-plus-noise ratio (SINR) of multi-target sensing while ensuring the multi-user multi-stream communications. To achieve this, a comprehensive optimization approach is employed, encompassing the design of radar receive vector, transmit beamforming matrix, and IOS transmissive and reflective coefficients. Due to the non-convex nature of the formulated problem, an auxiliary variable is introduced to transform it into a more tractable form. Consequently, the problem is decomposed into three sub-problems based on the block coordinate descent algorithm. Semidefinite relaxation and successive convex approximation methods are leveraged to convert the sub-problem into a convex problem, while the iterative rank minimization algorithm and penalty function method ensure the equivalence. Furthermore, the scenario is extended to mode switching and time switching protocols. Simulation results validate the convergence and superior performance of the proposed algorithm compared to other benchmark algorithms.
27 September 2024 in IEEE Wireless Communications Letters
This paper investigates a movable antenna (MA)-assisted multiuser integrated sensing and communication (ISAC) system, where the base station (BS) and communication users are all equipped with MA for improving both the sensing and communication performance. We employ the Cramér-Rao bound (CRB) as the performance metric of sensing, thus a joint beamforming design and MAs’ position optimizing problem is formulated to minimize the CRB. However the resulting optimization problem is NP-hard and the variables are highly coupled. To tackle this problem, we propose an alternating optimization (AO) framework by adopting semidefinite relaxation (SDR) and successive convex approximation (SCA) technique. Numerical results reveal that the proposed MA-assisted ISAC system achieves lower estimation CRB compared to the fixed-position antenna (FPA) counterpart.
7 November 2024 in IEEE Transactions on Wireless Communications
This paper studies a multiple intelligent reflecting surfaces (IRSs) collaborative localization system where multiple semi-passive IRSs are deployed in the network to locate one or more targets based on time-of-arrival. It is assumed that each semi-passive IRS is equipped with reflective elements and sensors, which are used to establish the line-of-sight links from the base station (BS) to multiple targets and process echo signals, respectively. Based on the above model, we derive the Fisher information matrix of the echo signal with respect to the time delay. By employing the chain rule and exploiting the geometric relationship between time delay and position, the Cramér-Rao bound (CRB) for estimating the target’s Cartesian coordinate position is derived. Then, we propose a two-stage algorithmic framework to minimize CRB in single- and multi-target localization systems by joint optimizing active beamforming at BS, passive beamforming at multiple IRSs and IRS selection. For the single-target case, we derive the optimal closed-form solution for multiple IRSs coefficients design and propose a low-complexity algorithm based on alternating direction method of multipliers to obtain the optimal solution for active beaming design. For the multi-target case, alternating optimization is used to transform the original problem into two subproblems where semi-definite relaxation and successive convex approximation are applied to tackle the quadraticity and indefiniteness in the CRB expression, respectively. Finally, numerical simulation results validate the effectiveness of the proposed algorithm for multiple IRSs collaborative localization system compared to other benchmark schemes as well as the significant performance gains.
9 October 2024 in IEEE Transactions on Communications
This paper presents a novel multi-stream downlink communication system that utilizes a transmissive reconfigurable intelligent surface (RIS) transceiver. Specifically, we elaborate the downlink communication scheme using time-modulated array (TMA) technology, which enables high order modulation and multi-stream beamforming. Then, an optimization problem is formulated to maximize the minimum signal-to-interference-plus-noise ratio (SINR) with user fairness, which takes into account the constraint of the maximum available power for each transmissive element. Due to the non-convex nature of the formulated problem, finding optimal solution is challenging. To mitigate the complexity, we propose a linear-complexity beamforming algorithm based on consensus alternating direction method of multipliers (ADMM). Specifically, by introducing a set of auxiliary variables, the problem can be decomposed into multiple sub-problems that are amenable to parallel computation, where the each sub-problem can yield closed-form expressions, bringing a significant reduction in the computational complexity. The overall problem achieves convergence by iteratively addressing these sub-problems in an alternating manner. Finally, the convergence of the proposed algorithm and the impact of various parameter configurations on the system performance are validated through numerical simulations.
13 May 2025 in IEEE Transactions on Wireless Communications
Spatial scattering modulation (SSM), an emerging millimeter-wave (mmWave) multiple-input multiple-output (MI-MO) modulation technique, exploits spatial beam resources to enhance the modulation degree of freedom. However, to address the problem that the detection performance of existing scalarbased maximum likelihood (SML) detector is not optimal and the complexity is too high, this paper develops vector-based maximum likelihood (VML) and low-complexity (LC) detectors for the structural characteristics of SSM system receivers, respectively. Then, we give corresponding analysis for the complexity of each of the three detectors. Based on the SML, VML, and LC detectors, we derive the union upper bound of average bit error probability (ABEP) for the SSM scheme, respectively. Monte Carlo simulations validate the correctness of the analytical derivation and show that when ABEP = 10–5, the signal-to-noise ratio (SNR) required for the VML-based ABEP values is 5.5 dB less than that obtained from SML detection. Moreover, compared with SML, the detection complexity of the proposed LC algorithm is reduced by about 50% and the transmit SNR also saves 1 dB SNR. Furthermore, when the number of scatterers is higher, the ABEP performance advantage of the SSM system is more fully unlocked.
23 April 2026 in IEEE Communications Surveys & Tutorials
The rapid development of sixth-generation (6G) wireless networks requires seamless integration of communication and sensing to support ubiquitous intelligence and real-time, high-reliability applications. Integrated sensing and communication (ISAC) has emerged as a key solution for achieving this convergence, offering joint utilization of spectral, hardware, and computing resources. However, realizing high-performance ISAC remains challenging due to environmental line-of-sight (LoS) blockage, limited spatial resolution, and the inherent coverage asymmetry and resource coupling between sensing and communication. Intelligent reflecting surfaces (IRSs), featuring low-cost, energy-efficient, and programmable electromagnetic reconfiguration, provide a promising solution to overcome these limitations. This paper presents a comprehensive overview of IRS-aided wireless sensing and ISAC technologies, including IRS architectures, target detection and estimation techniques, beamforming designs, and performance metrics. It further explores IRS-enabled new opportunities for more efficient performance balancing, coexistence, and networking in ISAC systems, focuses on current design bottlenecks, and outlines future research directions. This paper aims to offer a unified design framework that guides the development of practical and scalable IRS-aided ISAC systems for the next-generation wireless network.