Jeongho Hwang

Jeongho Hwang

Auto-generated profile, based on publicly available information

Jeongho Hwang

Cadence Design Systems, San Jose, CA, USA

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 September 2018 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
KPKwanseo Park
Kwanseo Park
Woorham BaeWoorham Bae
Woorham Bae
JLJinhyung Lee
Jinhyung Lee
JHJeongho Hwang
Jeongho Hwang
DJDEOGKYOON JEONG
DEOGKYOON JEONG
A single-loop referenceless clock and data recovery (CDR) with a compact frequency acquisition scheme is presented. A bang-bang phase-frequency detector (BBPFD) is proposed that tracks the frequency difference by detecting the drift direction of the non-return to zero bit stream with respect to the multi-phase clock and generates UP/DN output signals accordingly. When frequency locked, the BBPFD is degenerated into the conventional bang-bang phase detector (BBPD). The UP/DN output signals from the BBPFD are thus connected directly to the loop filter, thereby reducing the acquisition time without any loss of cycles. The effect of sampling phase mismatch is analyzed, and the capture range is calculated. In addition, the frequency acquisition time is analytically derived and verified by simulation. The proposed CDR has been implemented in a 65-nm CMOS process and occupies an active area of 0.047 mm 2 . The measured capture range is 6.7-11.2 Gb/s, and the frequency acquisition time is less than 2.19 μs. The proposed CDR achieves error-free operation (BER <; 10 -12 ) for PRBS31 pattern and consumes 22.5 mW at 10 Gb/s.

26 October 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
KPKwanseo Park
Kwanseo Park
KLKwangho Lee
Kwangho Lee
SCSung-Yong Cho
Sung-Yong Cho
JLJinhyung Lee
Jinhyung Lee
JHJeongho Hwang
Jeongho Hwang
DJDEOGKYOON JEONG
DEOGKYOON JEONG
A continuous-rate referenceless clock and data recovery (CDR) circuit with an unlimited frequency acquisition capability is presented. The proposed frequency detector (FD) is derived from a multi-phase oversampling FD. Through accurate analysis of the root causes limiting the capture range, the extension techniques are proposed and digitally implemented by a small hardware overhead. The FD achieves the unlimited frequency detection capability and exhibits robust operation regardless of the initial clock frequency. The effect of the quadrature error is analyzed and verified by simulation. In addition, a frequency lock detector is implemented to control the loop gain for fast frequency acquisition. The prototype CDR circuit was designed and fabricated in a 65-nm CMOS process, occupying an active area of 0.045 mm². The CDR circuit achieves a capture range from 4 Gb/s to 20 Gb/s, which is limited only by the oscillator operating range. The worst case acquisition time is 25 μs with a PRBS31 pattern. The CDR circuit achieves a BER less than 10⁻¹² and an energy efficiency of 1.87 pJ/b.

1 February 2020
Verified
Conference Paper
Closed access
JPJun-Eun Park
Jun-Eun Park
JHJeongho Hwang
Jeongho Hwang
JOJonghyun Oh
Jonghyun Oh
DJDeog-Kyoon Jeong
Deog-Kyoon Jeong
Digital low-dropout regulators (DLDOs) are commonly used in low-power system-on-chips (SoCs) because of their low-voltage operation and fast transient response via the digital control of a power gate. However, the digital control of the power gate results in an output voltage ripple and a decrease in the power-supply rejection (PSR). In addition, the transient performance of DLDOs depends strongly on the operating clock frequency. Several techniques such as event-driven operation [1], VCO-embedded time-based control [2], and computed regulation [3] have been proposed to reduce the dependency on the operating clock frequency. Nonetheless, the output voltage ripple and PSR degradation of DLDOs still need to be addressed. Although an inverter-based analog LDO [4] that provides a low-voltage operation and a wide-band PSR has been proposed, as compared to DLDOs it has a slow transient response and narrow input voltage range.

1 June 2019
Verified
Conference Paper
Closed access
JHJeongho Hwang
Jeongho Hwang
HCHong-Seok Choi
Hong-Seok Choi
HDHyungrok Do
Hyungrok Do
GJGyu-Seob Jeong
Gyu-Seob Jeong
DKDaehyun Koh
Daehyun Koh
DJDeog-Kyoon Jeong
Deog-Kyoon Jeong

28 April 2017 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
JHJeongho Hwang
Jeongho Hwang
GJGyu-Seob Jeong
Gyu-Seob Jeong
Woorham BaeWoorham Bae
Woorham Bae
JPJun-Eun Park
Jun-Eun Park
CYChang Soo Yoon
Chang Soo Yoon
DJDEOGKYOON JEONG
DEOGKYOON JEONG
This brief presents a 32 Gb/s driver for a Mach-Zehnder modulator (MZM) and an electro-absorption modulator (EAM). A push-pull current-mode logic driver is chosen to achieve a better power efficiency and a large voltage swing. A double cascode with thin oxide transistors is employed to mitigate the over-voltage stress associated with a large output voltage swing. At the same time, shunt-peaking inductors are incorporated in a compact way to extend the bandwidth and to have a flat group delay. The proposed driver has been fabricated using 65 nm CMOS technology with an active area of 0.086 mm 2 . The electrical measurement result shows that the driver exhibits a differential output swing of 4 V pp at 10 Gb/s. The measured extinction ratios of the driver using the MZM and EAM are 4.53 dB and 4.17 dB, respectively, at 32 Gb/s. The power consumption is 201 mW at 32 Gb/s, which corresponds to an energy efficiency of 6.28 mW/Gb/s.

13 September 2018 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
HCHong-Seok Choi
Hong-Seok Choi
JHJeongho Hwang
Jeongho Hwang
GJGyu-Seob Jeong
Gyu-Seob Jeong
GKGyungock Kim
Gyungock Kim
DJDEOGKYOON JEONG
DEOGKYOON JEONG
This brief presents a single-ended asymmetric push-pull inverter for driving a vertical-cavity surface-emitting laser (VCSEL). The proposed driver topology features less power dissipation compared with commonly used differential CML-based drivers. Considering power efficiency and the bandwidth of the VCSEL, the modulation current and the bias of the VCSEL are set to 1.5 and 6.2 mA, respectively. Diode-connected cascode transistors are employed to ensure the adequate voltage level at the output node. Series inductive peaking is utilized to extend the limited bandwidth by splitting the load capacitance and the driver self-capacitance. The proposed VCSEL driver has been fabricated in 65-nm CMOS technology and occupies an active area of 0.009 mm 2 . The extinction ratio and the optical modulation amplitude of the driver are measured to be 1.8 dB and 0 dBm at 35 Gb/s. The chip consumes 22.6 mW at the data rate of 35 Gb/s, which corresponds to the energy efficiency of 0.65 pJ/b.